Linux-Kernel Archive: [PATCH v3 0/5] MIPS: ralink: add CPU clock detection and clock gate driver for MT7621 [PATCH v3 0/5] MIPS: ralink: add CPU clock detection and clock gate driver for MT7621 From: Sergio Paracuellos Date: Fri Nov 13 2020 - 10:46:43 EST Next message: Sergio Paracuellos: "[PATCH v3 1/5] dt-bindings: clock: add dt binding header for mt7621 clocks" Previous message: Lee Jones: "Re: [PATCH 02/40] drm/amd/display/dc/core/dc_link_dp: Move DP_VGA_LVDS_CONVERTER_ID_{2, 3} to where they're used" Next in thread: Sergio Paracuellos: "[PATCH v3 1/5] dt-bindings: clock: add dt binding header for mt7621 clocks" Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] This patchset ports CPU clock detection for MT7621 from OpenWrt and adds a complete clock plan for the mt7621 SOC. The documentation for this SOC only talks about two registers regarding to the clocks: * SYSC_REG_CPLL_CLKCFG0 - provides some information about boostrapped refclock. PLL and dividers used for CPU and some sort of BUS (AHB?). * SYSC_REG_CPLL_CLKCFG1 - a banch of gates to enable/disable clocks for all or some ip cores. No documentation about a probably existent set of dividers for each ip core is included in the datasheets. So we cannot make anything better, AFAICT. Looking into driver code, and some openWRT patched there are another frequences which are used in some drivers (uart, sd...). According to all of this information the clock plan for this SoC is set as follows: - Main top clock "xtal" from where all the rest of the world is derived. - CPU clock "cpu" derived from "xtal" frequencies and a bunch of register reads and predividers. - BUS clock "bus" derived from "cpu" and with (cpu / 4) MHz. - Fixed clocks from "xtal": * "50m": 50 MHz. * "125m": 125 MHz. * "150m": 150 MHz. * "250m": 250 MHz. * "270m": 270 MHz. We also have a buch of gate clocks with their parents: - "hsdma": "150m" - "fe": "250m" - "sp_divtx": "270m" - "timer": "50m" - "pcm": "270m" - "pio": "50m" - "gdma": "bus" - "nand": "125m" - "i2c": "50m" - "i2s": "270m" - "spi": "bus" - "uart1": "50m" - "uart2": "50m" - "uart3": "50m" - "eth": "50m" - "pcie0": "125m" - "pcie1": "125m" - "pcie2": "125m" - "crypto": "250m" - "shxc": "50m" There was a previous attempt of doing this here[0] but the author (Chuanhong Guo) did not wanted to make assumptions of a clock plan for the platform that time. It seems that now he has a better idea of how the clocks are dispossed for this SoC so he share code[1] where some frequencies and clock parents for the gates are coded from a real mediatek private clock plan. I do really want this to be upstreamed so according to the comments in previous attempt[0] from Oleksij Rempel and the frequencies in code[1] I have tried to do this by myself. All of this patches have been tested in a GNUBee PC1 resulting in a working platform. Changes in v3: - Fix compilation warnings reported by kernel test robot because of ignoring return values of 'of_clk_hw_register' in functions 'mt7621_register_top_clocks' and 'mt7621_gate_ops_init'. - Fix dts file and binding documentation 'clock-output-names'. Changes in v2: - Remove the following patches: * dt: bindings: add mt7621-pll device tree binding documentation. * MIPS: ralink: add clock device providing cpu/ahb/apb clock for mt7621. - Move all relevant clock code to 'drivers/clk/ralink/clk-mt7621.c' and unify there previous 'mt7621-pll' and 'mt7621-clk' into a unique driver and binding 'mt7621-clk'. - Driver is not a platform driver anymore and now make use of 'CLK_OF_DECLARE' because we need clocks available in 'plat_time_init' before setting up the timer for the GIC. - Use new fixed clocks as parents for different gates and deriving from 'xtal' using frequencies in[1]. - Adapt dts file and bindings header and documentation for new changes. - Change MAINTAINERS file to only contains clk-mt7621.c code and mediatek,mt7621-clk.yaml file. [0]: https://www.lkml.org/lkml/2019/7/23/1044 [1]: https://github.com/981213/linux/commit/2eca1f045e4c3db18c941135464c0d7422ad8133 Sergio Paracuellos (5): dt-bindings: clock: add dt binding header for mt7621 clocks dt: bindings: add mt7621-clk device tree binding documentation clk: ralink: add clock driver for mt7621 SoC staging: mt7621-dts: make use of new 'mt7621-clk' MAINTAINERS: add MT7621 CLOCK maintainer .../bindings/clock/mediatek,mt7621-clk.yaml | 61 +++ MAINTAINERS | 6 + drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/ralink/Kconfig | 14 + drivers/clk/ralink/Makefile | 2 + drivers/clk/ralink/clk-mt7621.c | 408 ++++++++++++++++++ drivers/staging/mt7621-dts/gbpc1.dts | 11 - drivers/staging/mt7621-dts/mt7621.dtsi | 72 ++-- include/dt-bindings/clock/mt7621-clk.h | 41 ++ 10 files changed, 567 insertions(+), 50 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/mediatek,mt7621-clk.yaml create mode 100644 drivers/clk/ralink/Kconfig create mode 100644 drivers/clk/ralink/Makefile create mode 100644 drivers/clk/ralink/clk-mt7621.c create mode 100644 include/dt-bindings/clock/mt7621-clk.h -- 2.25.1 Next message: Sergio Paracuellos: "[PATCH v3 1/5] dt-bindings: clock: add dt binding header for mt7621 clocks" Previous message: Lee Jones: "Re: [PATCH 02/40] drm/amd/display/dc/core/dc_link_dp: Move DP_VGA_LVDS_CONVERTER_ID_{2, 3} to where they're used" Next in thread: Sergio Paracuellos: "[PATCH v3 1/5] dt-bindings: clock: add dt binding header for mt7621 clocks" Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
