Java程序辅导

C C++ Java Python Processing编程在线培训 程序编写 软件开发 视频讲解

客服在线QQ:2653320439 微信:ittutor Email:itutor@qq.com
wx: cjtutor
QQ: 2653320439
Past > QUT Faculties & Divisions > Faculty of Built Environment and Engineering | QUT ePrints QUT Home Contact Home Browse About Login Statistics dashboard Past > QUT Faculties & Divisions > Faculty of Built Environment and Engineering Up a level Export as ASCII CitationAccess and License IndicatorsBibTeXDownload and Citation Statistics (CSV)Dublin CoreEP3 XMLEndNoteJSON-LDSimple eprint (JSON) Atom RSS 1.0 RSS 2.0 QUT (107343) Past (102690) QUT Faculties & Divisions (100037) Faculty of Built Environment and Engineering (8573) Group by: Item Type | Date Jump to: Book/Report | Chapter in Book, Report or Conference volume | Contribution to Journal | Contribution to Newspaper, Magazine or Website | Conference [Discontinued] | Contribution to conference | Non-Traditional Research Output | QUT Thesis | Thesis | Working Paper | Other Contribution Number of items at this level: 8573. Book/Report Zare, Firuz (Ed.) (2011) Electromagnetic Interference Issues in Power Electronics and Power Systems. Bentham Science Publishers, United Arab Emirates. 4 Hortz, Allison, Smith, Dianne, & Harrington, Kelly (Eds.) (2006) Exit: QUT Interior Design 2006. Queensland University of Technology, School of Design, Australia, Queensland, Brisbane. Kajewski, Stephen L., Brameld, Gerald H., Thambiratnam, David, & Hampson, Keith D. (Eds.) (1997) Experimental investigation into the effects of post-tensioning on multi-level formwork load distribution. Physical Infrastructure Centre, Queensland University of Technology, Brisbane. Corke, Peter & Sukkarieh, Salah (Eds.) (2006) Field and Service Robotics Results of the 5th International Conference.Vol. 25. Springer Tracts in Advanced Robotics, 25. Springer. Kajewski, Stephen L., Brameld, Gerald H., Thambiratnam, David P., & Hampson, Keith D. (Eds.) (1996) Multi-level formwork load distribution : a state-of-the-art report. Research report / Physical Infrastructure Centre. Physical Infrastructure Centre, Queensland University of Technology, Brisbane. Walker, Derek & Hampson, Keith (Eds.) (2003) Procurement strategies : a relationship-based approach. Wiley-Blackwell, United States of America. Chan, Tommy & Thambiratnam, David (Eds.) (2011) Structural Health Monitoring in Australia. Nova Science Publishers, Hauppauge, N.Y. 44 Lehmann, Steffen (Ed.) (2004) Absolutely Public Crossover: Art and Architecture. Images Publishing, Mulgrave, VIC. Brisbin, Chris (Ed.) (2008) Architecture Projects Review 2008. QUT School of Design, Australia, Queensland, Brisbane. Vulker, Judy & Johnston, Lindsay (Eds.) (1997) CHASA Refereed Designs 1995/1996. QUT, Brisbane, Queensland. Brown, Kerry, Hampson, Keith, Brandon, Peter, & Pillay, Janet (Eds.) (2008) Clients driving construction innovation: Benefiting from innovation. CRC for Construction Innovation, Australia. 759 Hampson, Keith, Brown, Kerry, & Brandon, Peter (Eds.) (2005) Clients driving construction innovation: Mapping the terrain. Cooperative Research Centre for Construction Innovation, Australia, Queensland, Brisbane. 512 Brown, Kerry, Hampson, Keith, & BRANDON, Peter (Eds.) (2006) Clients driving construction innovation: Moving ideas into practice. CRC for Construction Innovation, Australia, Queensland, Brisbane. 1,481 Armstrong, Helen, O'Hare, Daniel, & Sim, Jeannie (Eds.) (2001) Contests and Management Issues. Investigating Queensland's Cultural Landscapes: Contested Terrains Series. Queensland University of Technology, Brisbane, Qld. 679 Whitman, Paula, Avery, Tracey, & Dennis, Peta (Eds.) (2004) Cool: The 60s Brisbane House. School of Design and Built Environment, QUT, Brisbane, QLD. 1,623 Skitmore, Martin & Marston, Vernon (Eds.) (1999) Cost Modelling. Foundations of Building Economics. E and F.N. Spon Ltd, London, United Kingdom. Yigitcanlar, Tan, Velibeyoglu, Koray, & Baum, Scott (Eds.) (2008) Creative urban regions : harnessing urban technologies to support knowledge city initiatives. Information Science Reference, United States of America, Pennsylvania, Hershey. 45 47 Wrigley, Cara & Gomez, Rafael (Eds.) (2010) Design Horizons : Provoking Thoughts. Design Horizons / Queensland University of Technology, Brisbane, Qld. 277 Ling, S.M, Lee, AJ, Gie, Graham, Timperley, A. John, Hubble, Matthew, Howell, Jonathan, et al. (Eds.) (2010) The Exeter Hip: 40 Years of Innovation in Total Hip Arthroplasty. Exeter Hip Publishing, Exeter, UK. Lawry, Simon & Wrigley, Cara (Eds.) (2008) Faculty of Built Environment and Engineering Design Theme Conference 2008 Conference Proceedings. QUT Press, Australia. 134 Bell, John, Yan, Cheng, Ye, Lin, & Zhang, Liangchi (Eds.) (2008) Frontiers in materials science and technology. Trans Tech Publications, Switzerland. Taylor, Mark, Lee, Gini, & Lindquist, Marissa (Eds.) (2010) Interior Spaces in Other Places: 2010 IDEA Symposium.[ CD-ROM ed.]. Queensland University of Technology, Brisbane, Qld. 37 Taylor, Mark & Preston, Julieanna (Eds.) (2006) Intimus: Interior Design Theory Reader. John Wiley, Chichester. Metaxiotis, Kostas, Carrillo, Francisco, & Yigitcanlar, Tan (Eds.) (2010) Knowledge-Based Development for Cities and Societies: Integrated Multi-level Approaches. Premier Reference Source. IGI Global, Hershey, PA. 825 34 Yigitcanlar, Tan, Velibeyoglu, Koray, & Baum, Scott (Eds.) (2008) Knowledge-based urban development: Planning and applications in the information era. Information Science Reference, United States of America, Pennsylvania, Hershey. 50 Holt-Damant, Kathi & O'Neill, Hugh (Eds.) (1996) Measured drawings in Beijing courtyard houses. The University of Melboune, Australia, Victoria, Melbourne. Murray, Martin & Oghanna, Wardina (Eds.) (2004) New Railway Environment - A Multidisciplinary concept. Engineers Media, Crows Nest, NSW. Chattopadhyay, Gopinath, Kozan, Erhan, & Beard, Rodney (Eds.) (2003) Operations Research Into the 21st Century: Proceedings of 5th Operations Research Conference of Australian Society for Operations Research, Queensland Branch. Australian Society for Operations Research Queensland Branch, Australia, Queensland, Brisbane. Holt-Damant, Kathi & Sanders, Paul (Eds.) (2005) Proceedings from the third international conference of the association of architecture schools of australia. University of Queensland and Queensland University of Technology, Australia, Brisbane. 196 Caldas, Carlos, O'Brien, William, Chi, Seokho, Gong, Jie, & Luo, Xiaowei (Eds.) (2009) Proceedings of the 26th International Symposium on Automation and Robotics in Construction. International Association for Automation and Robotics in Construction, United States of America. Kennedy, Rosemary (Ed.) (2008) Proceedings of the 2nd International Subtropical Cities Conference Subtropical Cities 2008: From Faultlines to Sightlines - subtropical urbanism 20-20. Queensland University of Technology (QUT) Centre for Subtropical Design, Australia. Boashash, Boualem, Harle, Norbert, & Zoubir, Abdelhak (Eds.) (1996) Proceedings of the Fourth International Symposium on Signal Processing and Its Applications. IEEE & QUT, Brisbane, QLD. Sim, Jeannie & Armstrong, Helen B. (Eds.) (2001) Report 4: Reports of the Case Studies. Investigating Queensland's Cultural Landscapes: Contested Terrains. Cultural Landscape Research Unit, QUT, Brisbane. Yigitcanlar, Tan (Ed.) (2010) Rethinking Sustainable Development: Urban Management, Engineering, and Design. Premier Reference Source. IGI Global, Hershey, Pa. 90 Brisbin, Chris (Ed.) (2008) Review 2007: Architectural Projects. QUT School of Design, Australia, Queensland, Brisbane. Yigitcanlar, Tan, Yates, Peter, & Kunzmann, Klaus (Eds.) (2010) Summit Proceedings: The 3rd Knowledge Cities World Summit. Knowledge Cities World Summit Proceedings. World Capital Institute, City of Melbourne and Office of Knowledge Capital, Brisbane, Qld. 374 Taylor, Mark (Ed.) (2003) Surface Consciousness - A Special Issue Of Architectural Design. Architectural Design. Academy Press, United States of America. Yigitcanlar, Tan (Ed.) (2010) Sustainable Urban and Regional Infrastructure Development: Technologies, Applications and Management. Premier Reference Source. Information Science Reference, Hershey, PA. 804 Mathew, Joseph (Ed.) (2002) Systems Integrity and Maintenance. Queensland University of Technology Press, Brisbane, Qld. Newton, Peter, Hampson, Keith, & Drogemuller, Robin (Eds.) (2009) Technology, Design and Process Innovation in the Built Environment. Spon Press, Abingdon, Oxon. 28 Adam, Clayton J., Pearcy, Mark J., Schuetz, Michael, Crawford, Ross W., Goss, Benjamin G., Hutmacher, Dietmar, et al. (2011) Orthopaedics and trauma Queensland report 2009-10. (Unpublished) Adkins, Barbara, Barnett, Karen, Jerome, Kristine, Heffernan, Maree, & Minnery, John (2003) Women, Housing And Transitions Out Of Homelessness. Australian Housing and Urban Research Institute, Australia. Adkins, Barbara, Guthrie, Diane, Summerville, Jenny, & Mead, Elspeth (2002) Tenure Security and its Impact on Private Renters in Queensland. Australian Housing and Urban Research Institute, Melbourne, Vic. 1,507 Agarwal, K. K., Srivastava, Rahul, & Mishra, Sanjay K. (2005) Himalayan Orogen : foreland interaction.Vol. 2. Special publication of the Palaeontological Society of India, 2. Palaeontological Society of India, Department of Geology, University of Lucknow, Lucknow, India. Al-Shiekh Khalil, Wael, Goonetilleke, Ashantha, Carroll, Steven P., & Dawes, Les A. (2005) Land capability assessment for on-site sewage treatment systems. (Unpublished) Appold, Stephen, Baker, Douglas C., Donnet, Timothy, Kimmet, Philip C., Van de Riet, Odette, & van Twist, Mark (2008) Lessons from international comparison for the Commission ROL. Deel C : Internationale Vergelijking. Technical University of Delft, Netherlands. Avenell, S., Harris, T., & Manley, K. (1991) An environmental assessment of road and rail transportation. Department of Transport, Western Australia, Perth, Western Australia. Balls, Alison, Ferreira, Luis, & Bunker, Jonathan M. (2002) Quantifying Freight Movement Performance by Mode. 963 Banks, Jasmine, Bennamoun, Mohammed, Kubik, Kurt, & Corke, P (1997) A Taxonomy of Image Matching Techniques for Stereo Vision. Technical Report (QUT Space Centre for Satellite Navigation). QUT, Space Centre for Satellite Navigation, Brisbane, Queensland. 159 Baratloo, Mojdeh, Holt-Damant, Kathi, Wigley, Mark, Frampton, Kenneth, Wright, Gwendolyn, Grava, Sigurd, et al. (2009) Emerging urban futures in land water infrastructure, new model cities South East Queensland.Vol. 1. [ 19 ed.]. Emerging Urban Futures : New Model Cities, 1 (19). Graduate School of Architecture, Planning and Preservation, Columbia University & the University of Queensland, New York. Baum, Scott, Yigitcanlar, Tan, Horton, Stephen, Velibeyoglu, Koray, & Gleeson, Brendan (2007) The role of community and lifestyle in the making of a knowledge city. Urban Research Program. Griffith University, Australia, Queensland, Brisbane. Begum, Sharmina, Rasul, Mohammad, Brown, Richard, & Thomas, Phillip (2011) Stormwater management: An introduction to Green Gully. Nova Science Publishers, United States. 3 Bell, John, Miller, Wendy, & Berrill, Trevor (2008) The role of advanced glazing in Queensland homes: Reducing electricity load and greenhouse gas emissions [Final Report]. Queensland University of Technology, Australia. Bevrani, Hassan (2002) Improvement of stability and performance in DC-DC resonant converters. Bevrani, Hassan (2007) A New Approach for Simultaneous AVR-PSS Design. Bevrani, Hassan (2009) Robust Power System Frequency Control. Power Electronics and Power Systems. Springer, New York, USA. Birkeland, Janis (2002) Design for Sustainability - A Sourcebook of Integrated Eco-Logical Solutions. Earthscan Publications Ltd, United Kingdom, London. Birkeland, Janis (2008) Positive Development from vicious circles to virtuous cycles through built environment design. Earthscan Publications, United Kingdom. Blackler, Alethea (2008) Intuitive Interaction with Complex Artefacts: Empirically-Based Research. VDM Verlag Publishing Group, Germany. 730 Brott, Simone (2011) Architecture for a free subjectivity : Deleuze and Guattari at the horizon of the real. Ashgate Publishing Limited, United Kingdom. 8 9 Brown, Andrew R. (2005) Making music with Java : an introduction to computer music, Java programming, and the jMusic library. Lulu, Raleigh, North Carolina. Brown, Richard, Chanson, Hubert, McIntosh, David, & Madhani, Jai (2011) Turbulent velocity and suspended sediment concentration measurements in an urban environment of the Brisbane River Flood Plain at Gardens Point on 12-13 January 2011 [Report, CH83/11]. School of Civil Engineering, The University of Queensland, Australia. 509 17 Bucolo, Sam & Buys, Laurie (2006) Engaging public servants in achieving energy efficient workplaces using Virtual Reality Modelling: a pilot study. Buisson, David & Jensen, Robert (2009) STRATÉGÉ – Study of Transparent Recognition, Accreditation Tools and Experience in a Global Environment. QUT Publications, Brisbane. Bunker, Jonathan M. (2001) Evaluation of Freight Corridor Mode Performance: A Literature Review. Bunker, Jonathan M. (2001) Evaluation of Freight Corridor Mode Performance: Brisbane - Cairns Corridor Freight Movement Analysis. Bunker, Jonathan M. (2000) Gardens Point campus transport study 2000. Bunker, Jonathan M. & Giles, Rory (2001) Evaluation of Freight Corridor Mode Performance: Brisbane - Cairns Corridor Agencies Survey. Carroll, Steven, Goonetilleke, Ashantha, Hargreaves, Megan, & Dawes, Les A. (2005) Risk-based approach to the management of on-site wastewater treatment facilities. (Unpublished) Carroll, Steven P., Dawes, Les A., Goonetilleke, Ashantha, & Hargreaves, Megan (2006) Water quality profile of an urbanising catchment – Ningi Creek Catchment. (Unpublished) 715 Chakrabarti, Saikat (2008) ANN for voltage stability monitoring and enhancement: Application of artificial neural networks for online voltage stability monitoring and enhancement of an electric power system. VDM Verlag Dr. Muller Aktiengesellschaft and Co. KG, Germany. Chamorro-Koc, Marianella (2008) Usability, experience and context-of-use: the design of product usability. VDM Verlag Publishing Group, Germany. Chan, Albert (2001) Framework for measuring success of construction projects. CRC for Construction Innovation, Brisbane. Chanson, Hubert, Brown, Richard J., Ferris, John, & Warburton, Kevin (2003) A Hydraulic, Environmental and Ecological Assessment of a Sub-tropical Stream in Eastern Australia: Eprapah Creek, Victoria Point QLD on 4 April 2003. Chikolwa, Bwembya (2009) Development and structuring of CMBS in Australia. VDM Verlag Dr. Muller, Germany, Saarbrucken. Chikolwa, Bwembya (1999) An integrated housing development system as a tool to resolving the housing problem in Zambia - The roles of a property manager. Unpublished, Unpublished. 209 Chung, Edward & Dumont, Andre-Gilles (2009) Transport simulation : beyond traditional approaches. CRC Press Group, Switzerland. Coffey, Vaughan (2010) Understanding organisational culture in the construction industry. Spon Research. Spon Press, United Kingdom. 23 Corke, Peter (2011) Robotics, vision and control: fundamental algorithms in MATLAB. Springer, Germany. Corke, Peter & Dunbabin, Matthew (2004) Rope shovel automation : ACARP Project C12030. Final report. ACARP Project. ACARP Australian Coal Association Research Program, Brisbane , Queensland. Corke, Peter, Dunbabin, Matthew, Wark, Tim, Sikka, Pavan, Hu, Wen, Abbot, David, et al. (2007) CSIRO Sensor and sensor networks research Progress report July 2006 to June 2007.[ 07/226 ed.]. Progress report sensor and sensor networks research 2006/2007 (07/226). CSIRO Publishing. CRC for Construction Innovation (2001) Life cycle modelling and design knowledge development in 3D virtual environments : final report. CRC for Construction Innovation, Brisbane. Davis, Lloyd & Bunker, Jonathan (2009) Heavy vehicle suspension testing and analysis - dynamic load sharing. State of Queensland (Department of Main Roads) & Queensland University of Technology, Australia, Qld, Brisbane. 6,393 Davis, Lloyd & Bunker, Jonathan (2009) Heavy vehicle suspension testing and analysis - Phase 3 - Eigenfrequency peak loads: measuring suspension health from wheel loads. Preliminary test report. State of Queensland (Department of Main Roads) & Queensland University of Technology, Australia, Qld, Brisbane. 1,435 Davis, Lloyd & Bunker, Jonathan (2007) Heavy vehicle suspensions - testing and analysis. A literature review. State of Queensland (Department of Main Roads) & Queensland University of Technology, Australia, Queensland, Brisbane. 2,187 Davis, Lloyd & Bunker, Jonathan (2008) Heavy Vehicle Suspensions - Testing and Analysis: Phase 3- Eigenfrequency Peak Loads. Test Plan. State of Queensland (Department of Main Roads) & Queensland University of Technology, Australia, Qld, Brisbane. 1,114 Davis, Lloyd & Bunker, Jonathan (2008) In-Service Testing of Heavy Vehicle Suspensions - Background Report for the NTC Project. State of Queensland (Department of Main Roads) & Queensland University of Technology, Australia, Qld, Brisbane. 346 Davis, Lloyd & Bunker, Jonathan (2008) Suspension Testing of 3 Heavy Vehicles - Methodology and Preliminary Frequency Analysis. State of Queensland (Department of Main Roads), Australia, Qld, Brisbane. 902 Davis, Lloyd, Bunker, Jonathan, & Karl, Charles (2008) Technical Feasibility Assessment of On-Board Mass-Monitoring (OBM) Devices: a) Accuracy and Robustness b) Ancillary Systems Analysis - Pilot Testing Plan. State of Queensland (Department of Main Roads), Australia, Qld, Brisbane. 400 Davis, Lloyd, Bunker, Jonathan, & Karl, Charles (2009) Technical feasibility assessment of on-board mass-monitoring (OBM) devices: a) Accuracy and robustness b) Ancillary systems analysis. Frequency analysis report. Technical feasibility assessment of On-Board Mass-Monitoring (OBM) devices. State of Queensland (Department of Transport and Main Roads), Australia. 180 Davis, Lloyd, Bunker, Jonathan, & Karl, Charles (2008) Technical Feasibility Assessment of On-Board Mass-Monitoring (OBM) Devices: a) Accuracy and Robustness b) Ancillary Systems Analysis. Full-Scale Testing Plan. State of Queensland (Department of Main Roads), Australia, Qld, Brisbane. 334 Davis, Lloyd E. & Bunker, Jonathan M. (2008) Characterising heavy vehicle suspensions – impulse testing results and analysis. Main Roads, Brisbane, Australia. Davis, Lloyd E. & Bunker, Jonathan M. (2009) Suspension testing of 3 heavy vehicles - dynamic wheel force analysis - Report. State of Queensland (Department of Main Roads) & Queensland University of Technology, Brisbane, Queensland, Australia. Davis, Lloyd E., Bunker, Jonathan M., & Karl, Charles (2008) Technical Feasibility Assessment of On-Board Mass-Monitoring (OBM) Devices: a) Accuracy and robustness b) Ancillary systems analysis. Pilot test plan. Dawes, Les A., Goonetilleke, Ashantha, & Rigden, Brian (2000) Performance evaluation of onsite sewage treatment : results of soil investigations. (Unpublished) Dawes, Les A. & Hackles, Ashleigh (2007) Issues and implications of using recycled water at Brisbane airport. (Unpublished) Desha, Cheryl, Hargroves, Karlson, & Reeve, Angie (2009) An investigation into the options for increasing the extent of energy efficiency knowledge and skills in engineering education, Report to the National Framework for Energy Efficiency. The Natural Edge Project (TNEP), Australia. 36 Desha, Cheryl, Hargroves, Karlson, Smith, Michael, Stasinopoulos, Peter, Stephens, Renee, & Hargroves, Stacey (2007) What is the state of education for energy efficiency in Australian engineering education? - Summary of questionnaire results - Report to the National Framework for Energy Efficiency. The Natural Edge Project, Australia. 35 Dunbabin, Matthew, Winstanley, Graeme, & Corke, Peter (2005) Refinement of automated dragline swing control algorithms : ACARP Project C13040. Final report. ACARP Project. ACARP Australian Coal Association Research Program, Brisbane , Queensland. Egodawatta, Prasanna K. & Goonetilleke, Ashantha (2009) Port of Brisbane stormwater quality : stage 2 development of a port specific water quality model. (Unpublished) Evans, Peter & Hargreaves, Doug (2010) Values-driven leadership. Tilde University Press, Australia. Ewert, Alan, Bissix, Glynn, & Baker, Douglas (2004) Integrated Resource and Environmental Management: The Human Dimension. CABI Publishing, Oxfordshire, United Kingdom. Ferreira, Luis (1999) The changing nature of demand for public transport in Brisbane: state-of-play and future trends. 2,584 Ferreira, Luis (1999) The changing nature of demand for public transport in Brisbane: unmet community transport needs - towards a rapid appraisal methodology, Working Paper 3. 627 Ferreira, Luis (1999) Future demand for public transport in Brisbane - Working paper 2: Major mode choice factors prioritised. 1,093 Ferreira, Luis (2005) Public Transport: Economic Investment Appraisal. (Unpublished) Ferreira, Luis & Bunker, Jonathan M. (2003) The Role of Governments in Improving Freight Logistics in Queensland - Working Paper 1: A Review of Evidence. 2,645 Ferreira, Luis & Charles, Phillip M. (2006) Environmental and Safety Impact of Brisbane’s Airtrain Operations Impact of passengers using rail rather than cars to reach Brisbane Airport. Ferreira, Luis, Mahatta, Pankaj, & Mcgregor, Fraser A. (1999) ITS implementation plan for the Gold Coast area. 1,293 Ferreira, Luis, Smith, Nariida C., & Mead, Elspeth J. (2000) Working Paper 3 of the E-Business and Transport Project: Transport Impacts and E-business. 1,754 Ferreira, Luis & Tetther, Clara M. (2004) The Role of Governments in Improving Freight Logistics in Queensland - Working Paper 2: Industry Interviews. 606 Fookes, Clinton B. & Bennamoun, Mohammed (2000) Registration of three dimensional medical images. 3 Fookes, Clinton B. & Bennamoun, Mohammed (2002) Rigid and non-rigid image registration and its association with mutual information: a review. Research Concentration in Computer Vision and Automation. 4 Ford, Jason (2001) Precision Guidance with Impact Angle Requirements. Department of Defence, Australia. 12 Ford, Jason & Coutler, A (2001) Filtering for Precision Guidance: The Extended Kalman Filter. Department of Defence, Australia. 163 Ford, Jason & Hunte, P (2003) Estimation of Manoeuvring Targets using Hybrid Filters. Department Of Defence; Defence Science Technology Organisation, Australia. Frazer, John, Dean, Peter, Gutierrez, Laurent, Jachna, Timothy, Chi, Lee Tak, Liauw, Laurence, et al. (2002) The way forward: report on the preparatory phase of prefabricated building design and construction methodology: identifying critical issues and recommending the way forward. The Hong Kong Polytechnic University, Hong Kong. Frossard, Laurent A., O'Riordan, Alison, & Goodman, Scott (2009) Performance analysis of stationary throwers : data for evidence-based classification (First edition). Queensland University of Technology, Brisbane, Australia. Frossard, Laurent A., O'Riordan, Alison, & Goodman, Scott (2009) Performance analysis of stationary throwers : data for evidence-based officiating(First edition). Queensland University of Technology, Brisbane, Australia. Frossard, Laurent A., O'Riordan, Alison, & Goodman, Scott (2009) Performance analysis of stationary throwers : data for evidence-based training. Queensland University of Technology, Brisbane, Australia. Fussel, Tom, Beazley, Scott, Aranda-Mena, Guillermo, Chevez, Agustin, Crawford, John, Succar, Bilal, et al. (2009) National guidelines for digital modelling : case studies. CRC for Construction Innovation, Brisbane, QLD. Fussell, Tom, Beazley, Scott, Aranda-Mena, Guillermo, Chevez, Agustin, Crawford, John, Succar, Bilal, et al. (2009) National Guidelines for Digital Modelling. Cooperative Research Centre for Construction Innovation, Australia. 1,007 Garner, Gary & Layton, Hollie (2008) Economic needs analysis - an increasing requirement for supporting development applications in Queensland and Eastern Australia. THG, Australia, Queensland, Brisbane. 310 Garner, Gary & Layton, Hollie (2008) Supporting DA's: the need for economic needs analysis. THG, Australia, Queensland, Brisbane. 159 Garner, Gary O. (2008) Economic impact assessment of locating forestry plantations on good quality agricultural land. Ghosh, Arindam & Ledwich, Gerard (2002) Power Quality Enhancement using Custom Power Devices. Kluwer Academic Publishers, Boston, USA. Goonetilleke, Ashantha, Dawes, Les, & Rigden, Brian (2000) Performance evaluation of onsite sewage treatment : summary report. (Unpublished) Goonetilleke, Ashantha, Dawes, Les A., & Biddle, Dean (2002) Performance evaluation of septic tanks in the Gold Coast region. Environmental Studies. Goonetilleke, Ashantha, Dawes, Les A., & Rigden, Brian (2000) Performance evaluation of onsite wastewater treatment : field sampling and preliminary evaluation of results. (Unpublished) Goonetilleke, Ashantha, Egodawatta, Prasanna, & Rajapakse, Jay (2011) Water Sensitive Urban Design (WSUD) application auditing. (Unpublished) Goonetilleke, Ashantha & Egodawatta, Prasanna K. (2008) Port of Brisbane stormwater quality : stage 1 rainfall simulation to evaluate pollutant build-up and wash-off from selected land uses. (Unpublished) 33 Goonetilleke, Ashantha, Rigden, Brian, & Dawes, Les A. (1999) Performance evaluation of onsite sewage treatment : Evaluation of current research. (Unpublished) Goonetilleke, Ashantha & Thomas, Evan C. (2003) Water quality impacts of urbanisation: Evaluation of current research. (Unpublished) 3,029 Goonetilleke, Ashantha & Thomas, Evan C. (2004) Water quality impacts of urbanisation: Relating water quality to urban form. (Unpublished) 1,441 Gray, David, Sharma, Arun, Boydell, Mary, Rayner, Michael, Holloway, Robert, Walker, Jim, et al. (2007) Sparse State - the Death of Distance. Queensland Government, Australia. 3 Gray, Matthew & Bunker, Jonathan (2005) Kelvin Grove Urban Villag: Regional Accessibility by Active Transport. 3,143 Guaralda, Mirko (2006) Le infrastrutture viarie dismesse o declassate ed il progetto di paesaggio - The road infrastructure abandoned or downgraded and landscape design. Librerie Universitarie Milanesi, Italy. Haldane, Mandy J. & Bunker, Jonathan M. (2002) Assessing the impacts of multi-combination vehicles on traffic operations and safety. Hampson, Keith D. & Brandon, Peter (2004) Construction 2020 - A vision for Australia's Property and Construction Industry. CRC Construction Innovation, Brisbane, Australia. Hampson, Keith D., Kraatz, Judy A., & Sanchez, Adriana (2012) LEVERAGING R&D INVESTMENT FOR THE AUSTRALIAN BUILT ENVIRONMENT A Vision of R&D Policy Directions. (Unpublished) Hannigan, Brian J. & Webb, Robert M. (1995) Final Report: Rearrangement of Property Boundaries to Facilitate Optimum Rural Land Use. 349 Hannigan, Brian J. & Webb, Robert M. (1993) LIS Technology and the Process of Rural Reconstruction: AKCLIS Final Report. 309 Heywood, Phil (2011) Community planning: Integrating social and physical environments. Wiley- Blackwell Publishing, United Kingdom. Heywood, Philip, Baker, Douglas, & Bajracharya, Bhishna (2004) Re-Booting Regional Planning in South East Queensland. Urban Policy Program, Griffith University, Brisbane, QLD. Heywood, Philip R. (1997) The Emerging Social Metropolis: Successful Planning Initiatives in Five New World Metropolitan Regions.Vol. 47. Progress in Planning, 47. Elsevier, Exeter, UK. 10 1 Heywood, Philip, R., Crane, Philip R., Egginton, Anita, & Gleeson, Jim (1998) Out and about : in or out,? Better outcomes from young people's use of public & community space in the city of Brisbane. Brisbane City Council, Brisbane. Higman, Barry & Hudson, Brian (2009) Jamaican Place Names. University of the West Indies Press, West Indies, Jamaica. Hockings, John, Hefferan, Michael, Dawes, Les A., Buzer, Sue, & Miller, Wendy F. (2004) Tarawa urban futures project : Kiribati. (Unpublished) Hudson, Brian (2008) How I didn't become a Beatle: Liverpool in the 1950s and 60s. The History Press, United Kingdom, Gloucestershire. 6 Hudson, Brian (2001) The Waterfalls of Jamaica. The University of West Indies Press, Kingston, Jamaica. Hunt, Philip D. & Bunker, Jonathan M. (2001) Analysis of Unbound Granular Pavement Deterioration for Use in Asset Management Modelling. Hussain, Zahir, Sadik, Amin, & O'Shea, Peter (2011) Digital signal processing: An introduction with MATLAB and applications. Springer, Germany. 67 42 Isokangas, Erik, Byrnes, Ashley, Coglan, John, Drogemuller, Robin, Hicks, Don, Jensen, Michael, et al. (2009) Interoperable Standards Development (Final Report) - Research Project No: 2007-001-EP. Cooperative Research Centre for Construction Innovation, Australia. 418 Jayalath, Dhammika & Tellambura, Chintha (2002) Peak-to-average Power Ratio of Orthogonal Frequency Division Multiplexing. 2 Jerome, Kristine & Heffernan, Maree (2002) Women, Housing and Transitions Out of Homelessness: First Report. AHURI, Australia, Queensland, Brisbane. Jerome, Kristine & Minnery, John (2002) Women, Housing and Transitions Out of Homelessness: Second Report. AHURI, Australia, Queensland, Brisbane. Kajewski, Stephen, Chen, Swee-Eng, Brewer, Graham, Gameson, Rod, Gajendran, Thayaparan, Kolomy, Richard, et al. (2003) Project Team Integration: Communication, Coordination and Decision Support. Part A: Scoping Studies. Kajewski, Stephen, Crawford, John, Weippert, Achim, Tilley, Paul, McFallan, Stephen, Remmers, Todd, et al. (2001) A National Perspective on the Status of ICT in the Australian Construction Industry, Technical Report 2001-008-C-08 CRC-CI. CRC Construction Innovation, Australia. 569 Kajewski, Stephen, Mohamed, Sherif, Tilley, Paul, Crawford, John, Chen, Swee-Eng, Lenard, Dennis, et al. (2001) A Brief Synopsis in the Use of ICT and ICPM in the Construction Industry, Technical Report 2001-008-C-02 CRC-CI. CRC Construction Innovation, Australia. 1,269 Kajewski, Stephen, Mohamed, Sherif, Tilley, Paul, Crawford, John, Chen, Swee-Eng, Lenard, Dennis, et al. (2001) State of the Art Report into the use of ICPM in the Construction Industry, Technical Report 2001-008-C-01 CRC-CI. Australia. 1,438 Kajewski, Stephen, Tilley, Paul, Crawford, John, Remmers, Todd, Chen, Swee-Eng, Lenard, Dennis, et al. (2001) Handheld Technology Review, Technical Report 2001-008-C-06 CRC-CI. Australia. 4,028 Kajewski, Stephen, Tilley, Paul, Crawford, John, Remmers, Todd, Chen, Swee-Eng, Lenard, Dennis, et al. (2001) Improving ICT Integration in Today's AEC Industry: Recommendations & Guidelines. Australia. 1,599 Kajewski, Stephen, Tilley, Paul, Crawford, John, Remmers, Todd, Chen, Swee-Eng, Lenard, Dennis, et al. (2001) Industry Culture: A Need for Change, Technical Report 2001-008-C-08 CRC-CI. Australia. 3,507 Kajewski, Stephen, Tilley, Paul, Crawford, John, Remmers, Todd, Chen, Swee-Eng, Lenard, Dennis, et al. (2001) Electronic Tendering: An Industry Perspective, Technical Report 2001-008-C-07 CRC-CI. Australia. 4,679 Kajewski, Stephen & Weippert, Achim (2003) Online Remote Construction Management ; A State of the Art Report. Australia. Kajewski, Stephen & Weippert, Achim (2000) Online Remote Construction Management: Literature Review. Australia. 1,548 Kajewski, Stephen, Weippert, Achim, & Tilley, Paul (2003) Online Remote Construction Management Part A: Construction Project Case Studies. Australia. Kajewski, Stephen, Weippert, Achim, & Tilley, Paul (2002) Online Remote Construction Management; Consolidated Project Report. Australia. 1,458 Kajewski, Stephen L. & Weippert, Achim (2003) Online Remote Construction Management: A State-of-the-Art Report. Queensland University of Technology, Brisbane. 1,092 Kajewski, Stephen L., Weippert, Achim, & Tilley, Paul A. (2003) Online Remote Construction Management: Construction Project Case Studies. Queensland University of Technology, Brisbane. 1,464 Kennedy, Rosemary (2009) Case study 1. A subtropical urban community. Investigating medium to high density residential typologies by design charrette. Centre for Subtropical Design, Australia. 229 Kennedy, Rosemary (2009) Case study 3. A subtropical urban community. Medium to high density residential typologies. Centre for Subtropical Design, Australia. 1,600 Kennedy, Rosemary (2009) Case study 4: A subtropical urban community. Medium to high density residential typologies. Centre for Subtropical Design, Australia. 1,527 Kennedy, Rosemary (2009) Case Study Typologies - Summary of common principles. A subtropical urban community. Investigating medium to high density residential typologies. Centre for Subtropical Design, Australia. 220 Kennedy, Rosemary (2009) Project report. A subtropical urban community, investigating medium to high density residential typologies by Design Charrette. Centre for Subtropical Design, Queensland Unversity of Technology, Queensland Government, Australia. 701 Kennedy, Rosemary (2009) Report - Case study 2. A subtropical urban community. Investigating medium to high density residential typologies by design charrette. Centre for Subtropical Design, Australia. 282 Kennedy, Rosemary (2009) Research report: A subtropical urban community. Investigating medium to high density residential typologies: Findings and recommendations from the Design Charrette. Centre for Subtropical Design, Australia. Kennedy, Rosemary (2005) Response to the Brisbane City Centre Draft Master Plan. Centre for Subtropical Design, Australia, Queensland, Brisbane. 1,189 Kennedy, Rosemary (2007) Response to the Smart State Council Report; Smart Cities: Rethinking the City. Centre for Subtropical Design, Australia, Queensland, Brisbane. 588 Kennedy, Rosemary (2009) A subtropical urban community: Investigating medium to high density residential typologies: Recommendations from the design charrette. Centre for Subtropical Design, Australia. Kennedy, Rosemary (2004) Subtropical values and principles of subtropical design for the South East Queensland region: A report for the Office of Urban Management Queensland Government. The Centre for Subtropical Design, Queensland University of Technology, Australia. 493 Kennedy, Rosemary & Gaskell, John (2007) Submission on the Brisbane City Centre, Draft Neighbourhood Plan. Centre for Subtropical Design, Australia, Queensland, Brisbane. 177 Kennedy, Rosemary, Gudur, Swati, & Betts, Martin (2010) Slum free India program: Report on the findings and recommendations of QUT BEE Workshop to investigate strategies to deliver better outcomes. Queensland University of Technology, Australia. 510 Kennedy, Rosemary, Hockings, John, Lowchoy, Daryl, & Seto, Janice (2005) Response to the Draft SEQ Regional Plan. Centre for Subtropical Design, Australia, Queensland, Brisbane. 381 Kennedy, Rosemary, Hockings, John, & Webster-Mannison, Marci (2005) Principles of Subtropical Design for Detached Houses. Centre for Subtropical Design, Australia, Queensland, Brisbane. 3,839 Kennedy, Rosemary, Kai, Charmaine, & Addison, Rex (2005) The New Queenslander: A Contemporary Environmentally Sustainable Timber House - Stage 2 Report. Centre for Subtropical Design, Australia, Queensland, Brisbane. 1,812 Kennedy, Rosemary, Kai, Charmaine, Addison, Rex, & Hockings, John (2005) The New Queenslander: A Contemporary Environmentally Sustainable Timber House - Stage 1 Report. Centre for Subtropical Design, Australia, Queensland, Brisbane. 6,178 Kennedy, Rosemary & Lee, Gini (2009) Surfers Paradise foreshore redevelopment masterplan - urban plaza zone [Review]. Centre for Subtropical Design, Australia. Kennedy, Rosemary & Loh, Susan (2007) A comparative study - Regulatory requirements on subdivisions for increasing passive cooling. Sustainable Built Assets. Icon.Net Pty Ltd, Australia, Queensland, Brisbane. 746 Kennedy, Rosemary, Loh, Susan, Miller, Wendy, Summerville, Jennifer, & Heffernan, Maree (2007) Same Latitude New Attitude: Reducing Greenhouse Gas Emissions in Institional Offices through Positive Adjustment of Thermostat Settings (0701018). The Centre for Subtropical Design, QUT, Australia, Queensland, Brisbane. 847 Kennedy, Rosemary, O'Hare, Daniel, Bajracharya, Bhishna, & Miller, Anne (2004) Incentives for Innovative Sustainable Development through Statutory Planning and Development regulation in a Subtropical Climate. The Centre for Subtopical Design, Australia, Queensland, Brisbane. 320 Kennedy, Rosemary, Thomson, Mark, Jenkins, Graham, Foong, Yin, Demirbilek, Nur, Ferreira, Luis, et al. (2006) Review of South Bank Corporation's Draft Ecologically Sustainable Policy and Implementation Plan. Centre for Subtropical Design, Brisbane. Kennedy, Rosemary J. & Gaskell, John S. (2007) Submission on the Brisbane City Centre, Draft Neighbourhood Plan. Kennedy, Rosemary J., Loh, Susan, Miller, Wendy F., Summerville, Jennifer A., & Heffernan, Maree E. (2007) Same Latitude New Attitude: Reducing Greenhouse gas emissions in institional offices through positive adjustment of thermostat settings - Technical paper. Khan, Omer A., Ferreira, Luis, & Bunker, Jonathan M. (2004) Modelling Passenger Mode Choice Behaviour Using Computer Aided Stated Preference Data : Report no. 1. Khan, Omer A., Ferreira, Luis, & Bunker, Jonathan M. (2006) Modelling Passenger Mode Choice Behaviour Using Computer Aided Stated Preference Data : Report No. 2. Khan, Omer A., Ferreira, Luis, & Bunker, Jonathan M. (2005) Research Proposal - Travel Mode Choice Modelling in Redlands. Kraal, Ben (2008) Considering use and design of speech recognition systems: Investigating users of complex socio-technical systems. VDM Verlag Publishing Group, Germany. Lake, Maree & Ferreira, Luis (2002) Modelling tolls: values of time and elasticities of demand: a summary of evidence. 8,151 Lake, Maree & Ferreira, Luis (2001) Performance measures used in transit contracts: Review of evidence. 2,433 Lake, Maree & Ferreira, Luis (2002) Towards A Methodology To Evaluate Public Transport Projects. 7,486 Lehmann, Steffen (2004) Der Web Brasiliens in die Moderne. Lit Verlag, Muenster, Germany. Lin, Terry (2009) Vibration of ship structures and its control. VDM Verlag Publishing Group, Germany. 39 Lingard, Helen & Rowlinson, Stephen (2005) Occupational Health and Safety in Construction Project Management. Spon Press, United States of America. Lomax, Tim, Ellis, David, Stockton, William, Schrank, David, Glover, Brianne, Norboge, Nick, et al. (2011) It's about time : investing in transportation to keep Texas economically competitive. Texas 2030 Committee, United States of America. 86 Lord, Dominique, Geedipally, Srinivas, Persaud, Bhagwant, Washington, Simon, van Schalkwyk, Ida, Ivan, John, et al. (2008) Methodology to predict the safety performance of rural multilane highways [Final Report for NCHRP Project 17-29]. National Cooperative Highway Research Program (NCHRP), Transportation Research Board, United States. Lu, Gao Qing, Chi, Seokho, Prozzi, Jorge, Yildirim, Yetkin, Zhang, Zhanmin, Centurion, Claudia, et al. (2011) Peer state assessment of TxDOT maintenance program and practices - Workshop and road rally findings (CTR 0-6664-1). Center for Transportation Research, The University of Texas at Austin, United States of America. Lui, G & Gu, YuanTong (2005) An introduction to meshfree methods and their programming. Springer, Germany. 1,087 Manley, K. & Bennett, R. (1996) Graduate survey : final report. Department of Electrical and Computer Engineering, The University of Queensland, Brisbane Qld. Manley, Karen (2004) Australia’s first fibre-reinforced polymer bridge deck on the road network. CRC for Construction Innovation, Brisbane. Manley, Karen (2006) Better project outcomes with relationship management and 3D CAD. Icon.Net Pty Ltd, Australia. 382 Manley, Karen (2007) Brite innovation gallery 2007. CRC for Construction Innovation, Australia. 325 Manley, Karen (2003) Brite report 2003. CRC for Construction Innovation, Brisbane. Manley, Karen (2004) BRITE report 2004. CRC for Construction Innovation, Brisbane. Manley, Karen (2005) Brite report 2005. CRC for Construction Innovation, Brisbane. Manley, Karen (2004) Clever Planks. CRC for Construction Innovation, Brisbane. Manley, Karen (2001) Energy cost savings. CRC for Construction Innovation, Brisbane. 2 Manley, Karen (2004) Ground penetrating radar finds defects in bridge beams. CRC for Construction Innovation, Brisbane. Manley, Karen (2006) Innovate now : Improving performance in the building and construction industry. Icon.Net Pty Ltd, Australia. 300 Manley, Karen (1998) Innovation and government policy. Australian Economic Analysis Pty Ltd/NSW Department of State and Regional Development, Sydney NSW. Manley, Karen (2006) Managing stormwater with storage gutters and infiltration. Icon.Net Pty Ltd, Australia. 361 Manley, Karen (2004) Motorway Alliance. CRC for Construction Innovation, Brisbane. Manley, Karen (2004) Performance-based building codes and fire engineering yield innovative design solution. CRC for Construction Innovation, Brisbane. Manley, Karen (2006) Post-tensioned steel trusses for long span roofs. Icon.Net Pty Ltd, Australia. 1,322 Manley, Karen (2006) Saving site-remediation costs. Icon.Net Pty Ltd, Australia. 140 Manley, Karen (2006) Twin-coil air conditioning at the art gallery of South Australia. Icon.Net Pty Ltd, Australia. 305 Manley, Karen (2006) Using recycled tyres to construct an access road over saturated terrain. Icon.Net Pty Ltd, Australia. 446 Manley, Karen, Rose, Timothy, & McKell, Sue (2009) Innovative practices in the Australian built environment sector : An information resource for industry. Built Environment Industry Innovation Council, Australia. 515 Manley, Karen & Thorburn, Lyndal (1997) The role of the research system in 'Learning Economies'. PVCR Subcommittee of the AVCC, Canberra. Marceau, Jane & Manley, Karen (1999) The building and construction product system : the emergence of new innovative businesses. Department of Industry, Science and Resources, Canberra, ACT. Marceau, Jane & Manley, Karen (1999) Service enhanced manufacturing in the building and construction product system. Department of Industry, Science and Resources, Canberra. Marceau, Jane, Manley, Karen, Hampson, Keith D., Toner, Phillip, Gerasimou, Ester, & Cook, Nicole (1999) Mapping the building and construction product system : preliminary report. Department of Industry, Science and Resources, Canberra, ACT. Marceau, Jane, Manley, Karen, & Sicklen, Derek (1997) The high road or the low road? Alternatives for Australia's future. Australian Business Foundation, Sydney, NSW. Marceau, Jane, Manley, Karen, & Sicklen, Derek (1997) Summary report : the high road or the low road? Alternatives for Australia's future. Australian Business Foundation, Sydney, NSW. Marston, Vernon, Skitmore, Martin, Alshawi, Mustafa, Retik, Arkady, & Koudounas, C. (1991) The use of intelligent simulation in cost-time forecasts for housing rehabilitation works. (Unpublished) Mejias, Luis (2009) Automatic Detection of Marine Mammal from Aerial Imagery. (Unpublished) Milford, Michael (2008) Robot navigation from nature: Simultaneous localisation, mapping, and path planning based on hippocampal models. Springer, Germany. Miller, Evonne (2009) Media and body image: exploring the discrepancy between body perception and satisfaction. VDM Verlag Publishing Group, Germany. Monsere, Christopher, Ahn, Soyoung, & Zheng, Zuduo (2010) Empirical observation of the impact of traffic oscillations on freeway safety. Oregon Transportation Research and Education Consortium (OTREC), United States. Newman, Peter, Hargroves, Karlson (Charlie), Desha, Cheryl, Hall, Samantha, Sparks, David, Matan, Annie, et al. (2011) Understanding the performance of green commercial buildings: a Sustainable Built Environment National Research Centre (SBEnrc) Briefing Report. Curtin University / Queensland University of Technology, Australia. 1,578 Newman, Peter, Hargroves, Karlson (Charlie), Desha, Cheryl, Reeve, Angela, Bucknum, Megan, & Beatley, Tim (2011) Considering the application of biophilic urbanism: A Sustainable Built Environment National Research Centre (SBEnrc) Briefing Report. Curtin University / Queensland University of Technology, Australia. 458 Newman, Peter, Hargroves, Karlson (Charlie), Desha, Cheryl, Whistler, Luke, Farr, Annabel, Beauson, Justine, et al. (2011) The future of roads - reducing environmental pressures and the management of carbon: a Sustainable Built Environment National Research Centre (SBEnrc) Briefing Report. Sustainable Built Environment National Research Centre (SBEnrc), Australia. 55 Patrick, Carol-joy, Peach, Deborah, Pocknee, Catherine, Webb, Fleur, Fletcher, Marty, & Pretto, Gabriella (2008) The WIL (Work Integrated Learning) report : a national scoping study [Final Report]. Queensland University of Technology, Brisbane, QLD. 1 Peach, Deborah, Taylor, Peter, & Peters, Joanna (1998) Supporting Students for Flexible Learning. Teaching through Flexible Learning Resources. Griffith Institute of Higher Education, Brisbane, QLD. Pearcy, Mark J., Crawford, Ross W., & Lee, Philip (2008) QUT Medical Engineering Research Facility (MERF) Annual Report 2008. (Unpublished) Pearcy, Mark J., Crawford, Ross W., & Lee, Philip (2009) QUT Medical Engineering Research Facility (MERF) annual report 2009. (Unpublished) 1 Pearcy, Mark J., Crawford, Ross W., Schuetz, Michael, Adam, Clayton J., Goss, Benjamin G., & Hutmacher, Dietmar W. (2009) Orthopaedics and Trauma Queensland Annual Report 2008. (Unpublished) Persad, Khali, Loftus-Otway, Lisa, Harrison, Robert, Chi, Seokho, Franco, Patricia, Singh, Prakash, et al. (2009) In-depth analysis of the JACK model. Center for Transportation Research, The University of Texas at Austin, United States of America. 107 Persad, Khali, Loftus-Otway, Lisa, Harrison, Robert, Cruz-Ross, Alejandra, Singh, Prakash, Chi, Seokho, et al. (2009) Evaluation of TxDOT's J.A.C.K. model for revenue and expenditure projections. Center for Transportation Research, The University of Texas at Austin, United States of America. 295 Phillimore, J., Marinova, D., & Manley, K. (1994) R & D and the state's economic development. What is the best fit? Technology and Industry Advisory Council, Western Australia, Perth. Piyatrapoomi, Noppadol, Bunker, Jonathan, & Ferreira, Luis (2006) Freight intermodal terminal systems for port of Brisbane, Melbourne and Sydney. Queensland University of Technology, Australia, Queensland, Brisbane. 9,980 Piyatrapoomi, Noppadol & Kumar, Arun (2003) Investment decision-making under risk (reliability) and uncertainty for infrastructure asset management. CRC for Construction Innovation, Brisbane. Piyatrapoomi, Noppadol, Kumar, Arun, Robertson, Neil, & Weligamage, Justin (2004) Investment decision framework for infrastructure asset management: a probability-based approach. CRC for Construction Innovation, Brisbane. Piyatrapoomi, Noppadol, Kumar, Arun, Robertson, Neil, & Weligamage, Justin (2003) Strategy for the development of investment decision-making framework for road asset management for queensland department of main roads. CRC for Construction Innovation, Brisbane. Prasad, Deo, Teo, Melissa, & Dave, Malay (2009) Retrofitting Residential Housing and Precincts: Current Practice, New Strategies and Training Responses. Australian Government Department of Innovation, Industry, Science and Research, Australia. Raxworthy, Julian & Blood, J (2004) The MESH Book: Infrastructure/Landscape. RMIT Press, Australia, Melbourne. Richards, Peter & Kennedy, Rosemary (2004) Subtropical Neighbourhood Design. Centre for Subtropical Design, Australia, Queensland, Brisbane. 392 Robinson, Ricky, Rittenbruch, Markus, Brereton, Margot, Viller, Stephen, & Foth, Marcus (2009) Street computing workshop 2009 proceedings: held in co njunction with OZCHI 2009.. National ICT Australia, Australia. 367 Sargeant, Richard, Hatcher, Caroline, Trigunarsyah, Bambang, Coffey, Vaughan, & Kraatz, Judy (2010) Creating value in project management using PRINCE2. Queensland University of Technology (QUT), Australia. 6,019 Satherley, Shannon (2010) Reconnecting the interrupted landscape: a cultural landscape approach to Australian open-cut coal mining landscapes. LAP Lambert Academic Publishing, Germany. Savage, Susan, Davis, Rebekah, & Miller, Evonne (2010) Professional education in built environment and design [Final Report]. Australian Learning and Teaching Council, http://www.altc.edu.au/resource-professional-education-built-environment-design-qut-2010. 379 Shah, Rinkle (2009) A phenomenological study of contemplative experiences: Implications for interior design. VDM Verlag, Germany. 17,457 Sicklen, Derek, Manley, Karen, Mitchell, William, Watts, Mark, & Shaw, B. (1998) Pharmaceuticals and Australia's knowledge economy. Australian Pharmaceutical Manufacturers' Association, Sydney, NSW. Sim, Jean C. (2001) Landscape Design Theory Primer. School of Design and Built Environment, Q.U.T., Brisbane, QLD. Sim, Jean C. (2005) Old Brisbane Botanic Gardens: Conservation Plan Review 2005, Report of Stage 1 Heritage Significance and Conservation Policies. (Unpublished) Sim, Jean C., Armstrong, Helen B., Osborne, Ray, & Hart, Victor G. (2001) Report 1: Setting the Theoretical Scene. Investigating Queensland's Cultural Landscapes: Contested Terrains Series. Cultural Landscape Research Unit, QUT, Brisbane. Sim, Jean C., Hudson, Brian J., O'Hare, Daniel J., Armstrong, Helen B., Baker, Walter, & Hayes, Lincoln T. (2001) Report 2: Thematic Study of the Cultural Landscape of Queensland. Investigating Queensland's Cultural Landscapes: Contested Terrains Series. Cultural Landscape Research Unit, QUT, Brisbane. Sim, Jeannie & Seto, Jan (1996) Inventory of historic cultural landscapes in Queensland : final report : stage 1 : 1996. 1994-1995 National Estate Grant Program. 2 Sirikijpanichkul, Ackchai & Ferreira, Luis (2006) Contestable Freight Trends and Implication for Governments: Working Paper 1. 1,625 Sirikijpanichkul, Ackchai, Iyengar, Madhumita H., & Ferreira, Luis (2006) Valuing Air Quality Impacts of Transportation: A Review of Literature. Skitmore, Martin & Smith, Mark (1991) Automatic pricing of bills of quantities for construction work. Report to the Royal Institution of Chartered Surveyors Educational Trust. Skitmore, Martin, Stradling, Steven, Tuohy, Alan, & Mkwezalamba, Harry (1990) The accuracy of construction price forecasts. The University of Salford. 1 Skitmore, Martin & Thomas, Roy (1993) Percentage points of rootb1 [skewness statistic] for small normal samples. The University of Salford. Skitmore, Martin, Thorpe, Tony, McCaffer, Ronald, & Couzens, Alan (1993) Contract bidding decision support system. (Unpublished) Skitmore, Martin, Thorpe, Tony, McCaffer, Ronald, & Couzens, Alan (1992) Decision support system for contract bidding (interim report). (Unpublished) Smit, Debra & Coffey, Vaughan (2008) Study guide in construction management for low-rise and high-rise construction. Pearson SprintPrint, Australia, New South Wales, Frenchs Forest. Smith, Michael, Hargroves, Karlson, & Desha, Cheryl (2010) Cents and sustainability: Securing our common future by decoupling economic growth from environmental pressures. Earthscan Publications, United Kingdom. 38 Smith, Michael, Hargroves, Karlson, Stasinopoulos, Peter, Desha, Cheryl, & Hargroves, Stacey (2008) Analysis of the costs of inaction versus the costs of action on climate change for Australia, a submission by TNEP to the Garnaut Review. The Natural Edge Project, Australia. Smith, Michael, Hargroves, Karlson (Charlie), Desha, Cheryl, & Stasinopoulos, Peter (2009) Water transformed: Sustainable water solutions for climate change adaptation. The Natural Edge Project (TNEP), Griffith University, and Australian National University, Australia. 385 Smith, Michael, Hargroves, Karlson (Charlie), Stasinopoulos, Peter, Stephens, Renee, Desha, Cheryl, & Hargroves, Stacey (2007) Energy transformed: Sustainable energy solutions for climate change mitigation. The Natural Edge Project, CSIRO, and Griffith University, Australia. 288 Smith, Nariida, Ferreira, Luis, & Mead, Elspeth J. (2000) Introducing the transport impacts of E-business project. 592 Smith, Nariida, Wishart, Darren, Manderson, Jane, & Murray, Will (2004) Truck crashes by industry sector. Austroads Ltd, Australia. Smith, Nariida C. & Ferreira, Luis (2001) Working Paper 7 of the E-Business and Transport Project: Ranking & Rating the Transport Impacts of E-business. 937 Smith, Nariida C. & Ferreira, Luis (2001) Working Paper 8 of the E-Business and Transport Project: Opportunities for Transport Related Productivity Gains. 488 Smith, Nariida C., Ferreira, Luis, & Mead, Elspeth J. (2000) Working Paper 2 of the E-Business and Transport Project: E-BUSINESS TRENDS. 7,841 Smith, Nariida C., Ferreira, Luis, & Mead, Elspeth J. (2001) Working Paper 4 of the E-Business and Transport Project: Insights from Stakeholders/Experts. 509 Smith, Nariida C., Ferreira, Luis, & Mead, Elspeth J. (2001) Working Paper 6 of the E-Business and Transport Project: Regional Impacts of E-business in Australia. 733 Smith, Nariida C., Ferreira, Luis, & Mead, Elspeth J. (2001) Working Paper 9 of the E-Business and Transport Project: Global E-business and Transport Opportunities and Threats. 2,752 Smith, Nariida C., Mead, Elspeth J., & Ferreira, Luis (2001) Working Paper 5 of the E-Business and Transport Project: Data and Data Source Issues in Assessing the Transport Impacts of E-business. 922 Stasinopoulos, Peter, Smith, Michael, Hargroves, Karlson, & Desha, Cheryl (2009) Whole system design: An integrated approach to sustainable engineering. Earthscan Publications, United Kingdom. Summerville, Jennifer, Buys, Elinor, & Germann, Roseanne (2004) Implementing Social Impact Assessment in Local Government. Australia, Gold Coast. 186 Teo, Melissa & Loosemore, Martin (2010) Community-based protest against construction and engineering projects - the role of contagion in sustaining movement continuity. RICS - Royal Institution of Chartered Surveyors, United Kingdom. Tetther, Clara M. & Ferreira, Luis (2004) The Role of Governments in Improving Freight Logistics in Queensland. Working Paper 3: Transport Security. 2,148 Thomas, Glenn S. (2005) Metsi a Sekhala (fast water) Metsi a Phallang Butle (slow water): Report on community project outcomes BNB301 field studies in sustainable development. 1 Thomas, Glenn S. (2002) S.A.D. = Sustainable and delightful: A designer's guide to sustainable site planning. Queensland University of Tecnology, Brisbane, Queensland. Thomas, Glenn S., Sim, Jean C., & Poulton, Delwynn V. (2001) Planting design: An exploration of emerging theoretical frameworks to support sustainable landscape design. Queensland University of Technology, Brisbane, Queensland. Trevethan, Mark, Chanson, Hubert, & Brown, Richard (2007) Turbulence and Turbulent Flux Events in a Small Subtropical Estuary. Division of Civil Engineering, The University of Queensland, Australia, Queensland, Brisbane. 215 Trevethan, Mark, Chanson, Hubert, & Brown, Richard (2006) Two Series of Detailed Turbulence Measurements in a Small Subtropical Estuarine System. The University of Queensland, Division of Civil Engineering, Australia, Queensland, Brisbane. 284 von Weizsacker, Ernst, Hargroves, Karlson, Smith, Michael, Desha, Cheryl, & Stasinopoulos, Peter (2009) Factor five: Transforming the global economy through 80% improvements in resource productivity. Earthscan Publications, United Kingdom. 763 Wakefield, Ron, Chevez, Agustin, Crawford, John, Froese, Thomas, Frazer, John, Gard, Stefan, et al. (2008) Business drivers for building information modelling [Project 2005-033-C]. Cooperative Research Centre for Construction Innovation, Australia. Walker, D. H.T., Hampson, Keith D., & Peters, Renaye (2000) Relationship Based Procurement Strategies for the 21st Century. AusInfo, Canberra. 1 Wang, Jun (2003) Abrasive Waterjet Machining of Engineering Materials. Trans Tech Publications, Switzerland, Zurich. Washington, Simon, Karlaftis, Matthew, & Mannering, Fred (2010) Statistical and Econometric Methods for Transportation Data Analysis (2nd Edition). CRC Press Group, United States. Webb, Robert (2006) Final Report: Differential GPS Survey to Bore Holes: Toorbul; Ningi; Meldale and Black Swamp region. Queensland University of Technology, School of Urban Development, Australia, Queensland, Brisbane. Webb, Robert (2008) Finbal Report: Survey Monitoring - Spillway Behaviour of Lake MacDonald Dam (Six Mile Creek Dam) 2001- March 2008 [Water Operations - Noosa Shire Council]. Queensland University of Technology, Australia. 198 Webb, Robert (2004) Report on professional development leave (short). Advanced GPS surveying professional training program offered by Trimble Navigation Ltd Christchurch, New Zealand. Unpublished, Presentation. Webb, Robert M. (1994) 1994 Report on Teaching and Learning Activities for the SURVEY ASSISTANT TRAINEESHIP: Surveying and Mapping Studies. 1,177 Webb, Robert M. (1995) Technical Report on Geographic Information and Digital Mapping Activities in Linthorpe Valley, Pittsworth Shire, Darling Downs, Qld. (Unpublished) 355 Weinrauch, Patrick C., Beach, Terry A., Goss, Benjamin G., Lutton, Cameron J., Bell, Cameron G., & Crawford, Ross W. (2005) Pilot study conducted on Exeter PMMA cement reamer. 2,754 Weir, Ian (2007) Lightsite. University of Western Australia, Australia. Wolfenden, John, Gray, Matthew, & Evans, Michael (2006) Improved salinity management for the Nebine / Mungallala / Wallam catchment. University of New England, Armidale, NSW. Woolley, James (1997) Abode of Our Dreaming: Place Climate Culture and Dwelling. University of Southern Queensland, Toowoomba, Queensland. Wrigley, Cara (2011) Visceral hedonic rhetoric: Exploring the design of interactive products. VDM Verlag, Germany. Yigitcanlar, Tan, Dodson, Jago, Gleeson, Brendan, & Sipe, Neil (2005) Sustainable Australia: Containing travel in master planned estates. Griffith University, Australia, Queensland, Brisbane. Yigitcanlar, Tan & Evans, Rick (2007) Land use and public transportation accessibility index ( LUPTAI ) - Phase two final report. Land Use and Public Transportation Accessiblity Index (LUPTAI). The State of Queensland - Queensland Transport, Australia, Queensland, Brisbane. Yigitcanlar, Tan & Han, Jung (2009) Managing ubiquitous eco cities : telecommunication infrastructure networks, technology convergence and intelligent urban management systems. Queensland University of Technology, Australia, Queensland, Brisbane. 2,027 Zare, Firuz (2008) Power electronics education electronic book (PEEEB). Firuz Zare. Zheng, Zuduo (2011) Empirical analysis of freeway traffic oscillation: Its safety impact and evolution. VDM Verlag, Germany. Ziri-Castro, Karla & Scanlon, William (2009) Wireless channel modelling for indoor populated environments: Statistical characterization of narrowband channels at 2.45 Ghz and 5.2 Ghz. VDM Verlag Publishing Group, Germany. 2 Chapter in Book, Report or Conference volume Abbasalizadeh Boora, Arash, Zare, Firuz, & Ghosh, Arindam (2009) Application of dynamic hysteresis band height control to improve output voltage transient in boost and positive buck-boost converters. In Peracaula, J (Ed.) Proceedings of the Thirteenth European Conference on Power Electronics and Applications. IEEE Xplore, Online, pp. 1-8. 529 Abbasalizadeh Boora, Arash, Zare, Firuz, & Ghosh, Arindam (2009) Efficient voltage/current spike reduction by active gate signaling. In Kay, P (Ed.) Proceedings of the Electromagnetic Compatibility Symposium 2009. The Institute of Electrical and Electronics Engineers, Online, pp. 59-64. 2,428 2 1 Abbasalizadeh Boora, Arash, Zare, Firuz, Ghosh, Arindam, & Ledwich, Gerard (2007) Applications of Power Electronics in Railway Systems. In Islam, S (Ed.) Proceedings of the 2007 Australasian Universities Power Engineering Conference. Curtin University of Technology, Australia, pp. 113-121. 12,252 18 8 Abbasalizadeh Boora, Arash, Zare, Firuz, Ledwich, Gerard, & Ghosh, Arindam (2008) Bidirectional Positive Buck-Boost Converter. In Zawirski, K (Ed.) Proceedings of EPE-PEMC 2008 13th International Conference on Power Electronics and Motion Control. IEEE / EPE-PEMC, Poland, pp. 723-727. 3 8 6 Abbasalizadeh Boora, Arash, Zare, Firuz, Ledwich, Gerard, & Ghosh, Arindam (2008) A general approach to control a positive buck-boost converter to achieve robustness against input voltage fluctuations and load changes. In Manias, S (Ed.) Proceedings of the 39th IEEE Annual Power Electronics Specialists Conference. IEEE Xplore, United States, pp. 2011-2017. 799 17 10 Abbasalizadeh Boora, Arash, Zare, Firuz, Ledwich, Gerard, & Ghosh, Arindam (2008) A new DC-DC converter with multi output: topology and control strategies. In Zawirski, K (Ed.) Proceedings of the 2008 13th International Power Electronics and Motion Control Conference. EPE-PEMC Poznan University of Technology, CD Rom, pp. 468-474. 1 8 3 ABED-MERAIM, Karim, Linh-Trung, Nguyen, Sucic, Victor, Tupin, Florence, & Boashash, Boualem (2003) An Image Processing Approach for Underdetermined Blind Separation of Nonstationary Sources. In Loncaric, S (Ed.) CD Proceedings of the 3rd International Symposium on Image and Signal Processing and Analysis. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 347-352. 10 3 Abeysinghe Mudiyanselage, Chanaka, Thambiratnam, David, & Perera, Nimal (2012) Development of an innovative hybrid-composite floor system. In Topping, B H V & Tsompanakis, Y (Eds.) Proceedings of the Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing. Civil-Comp Press, United Kingdom, pp. 1-12. 326 Abeysinghe Mudiyanselage, Chanaka, Thambiratnam, David, & Perera, Nimal (2011) Investigation of hybridized polyurethane, glass fibre reinforced cement and steel laminate in structural floor plate systems. In Cowled, C J L (Ed.) Proceedings of the First International Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing. Queensland University of Technology, Australia, pp. 249-253. 619 Abu Hassim, Aliza, Kajewski, Stephen, & Trigunarsyah, Bambang (2011) A conceptual framework for ethical decision making in project procurement. In Singh, A, Cheung, S, Yazdani, S, & Ghafoori, N (Eds.) Modern Methods and Advances in Structural Engineering and Construction - Proceedings of the Sixth International Structural Engineering and Construction Conference (ISEC-6). Research Publishing Services, Singapore, pp. 85-90. 759 Abu Hassim, Aliza, Kajewski, Stephen, & Trigunarsyah, Bambang (2010) Factors contributing to ethical issues in project procurement planning: a case study in Malaysia. In Wang, Y, Yang, J, Shen, G, & Wong, J (Eds.) Proceedings of 2010 International Conference on Construction & Real Estate Management Volume 1. China Architecture and Building Press, China, pp. 312-317. 8,943 1 Abu-Shikhah, Nazih & Deriche, Mohamed (2001) A Hybrid LP-Harmonics Model for Low Bit-Rate Speech Compression with Natural Quality. In Proceedings of the 6th International Symposium on Signal Processing and its Applications. Universiti Teknologi Malaysia, Johor, Malaysia, pp. 723-726. Abu-Shikhah, Nazih & Deriche, Mohamed (2001) A Robust Technique for Harmonic Analysis of Speech. In Proceedings of the 2001 IEEE International Conference on Acoustics, Speech, and Signal Processing. Institute of Electrical and Electronics Engineers, Piscataway, USA, pp. 877-880. 7 1 Acharya, Ash, Smith, Bjorn, Barker, Ross, Crawford, Ross, & Timperley, A (2010) Operative technique: Acetabulum. In Lee, A J C, Gie, G A, Ling, R S M, Hubble, M J W, Howell, J R, Timperley, A J, et al. (Eds.) The Exeter Hip: 40 years of innovation in total hip arthroplasty. Exeter Hip Publishing, Exeter UK, pp. 171-184. 704 Adabi Firouzjaee, Jafar, Soltani, Hamid, & Zare, Firuz (2008) A pulse width modulation technique for a multilevel converter in high voltage high frequency applications. In Zawirski, K (Ed.) Proceedings of the 13th International Power Electronics and Motion Control Conference. IEEE EPE-PEMC, Poland, pp. 733-737. 2 2 Adabi Firouzjaee, Jafar & Zare, Firuz (2009) Analysis, calculation and reduction of shaft voltage in induction generators. In Ses, F & Perez-Donsion, M (Eds.) Proceedings of the International Conference on Renewable Energies and Power Quality (ICREPQ'09). European association for the development of renewable energies and power quality, http://www.icrepq.com/ICREPQ%2709/207-adabi.pdf, pp. 1-6. 401 5 Adabi Firouzjaee, Jafar, Zare, Firuz, & Ghosh, Arindam (2009) End-winding effect on shaft voltage in AC generators. In Dede, E (Ed.) Proceedings of the 13th European Conference on Power Electronics and Applications. Institute of Electrical and Electronics Engineers Inc., Online, pp. 1-10. 690 6 Adabi Firouzjaee, Jafar, Zare, Firuz, Ghosh, Arindam, & Lorenz, Robert (2009) Analysis of shaft voltage in a doubly-fed induction generator. In Sese, F (Ed.) Proceedings of the International Conference on Renewable Energies and Power Quality (ICREPQ'09). European association for the development of renewable energies and power quality, http://www.icrepq.com/papers-icrepq09.htm, pp. 1-5. 342 3 Adabi Firouzjaee, Jafar, Zare, Firuz, Ledwich, Gerard, & Ghosh, Arindam (2007) Leakage Current and Common Mode Voltage Issues in Modern AC Drive Systems. In Islam, S (Ed.) Proceedings of the 2007 Australasian Universities Power Engineering Conference. Curtin University of Technology, Australia, pp. 641-646. 2,906 48 Adabi Firouzjaee, Jafar, Zare, Firuz, Ledwich, Gerard, Ghosh, Arindam, & Lorenz, Robert (2008) Bearing damage analysis by calculation of capacitive coupling between inner and outer races of a ball bearing. In Zawirski, K (Ed.) Proceedings of the EPE-PEMC 2008 13th International Conference on Power Electronics and Motion Control. Institute of Electrical and Electronics Engineers Inc., EPE-PEMC, Poland, pp. 918-922. 8 5 Adam, Clayton (2006) Spine Biomechanics. In Wnek, G & Bowlin, G (Eds.) Encyclopaedia of Biomaterials and Biomedical Engineering. Taylor & Francis, United States of America, pp. 1-10. Adam, Clayton & Dougherty, Geoff (2011) Applications of medical image processing in the diagnosis and treatment of spinal deformity. In Dougherty, G (Ed.) Medical Image Processing. Techniques and Applications. Springer, United States of America, pp. 227-248. 20 Adam, Clayton, Izatt, Maree, & Askin, Geoffrey (2010) Design and evaluation of an MRI compatible axial compression device for 3D assessment of spinal deformity and flexibility in adolescent idiopathic scoliosis. In Aubin, C, Stokes, I, Moreau, A, & Labelle, H (Eds.) Proceedings of the International Research Society of Spinal Deformities, 8th Biennial Meeting - Research into Spinal Deformities 7. IOS Press, Netherlands, pp. 38-43. 249 9 10 Adam, Clayton, Pearcy, Mark, & Askin, Geoffrey (2005) Gravity-Induced Torsion and Intravertebral Rotation in Idiopathic Scoliosis. In Lok, T S (Ed.) IFMBE Proceedings Volume 12, 2005: 12th International Conference on Biomedical Engineering (ICBME 2005). ICBME and IFMBE, CD Rom, p. 1. 70 Adam, Clayton, Pearcy, Mark, & Askin, Geoffrey (2004) Patient-Specific Finite Element Analysis of Single Rod Adolescent Idiopathic Scoliosis Surgery. In Tanaka, M (Ed.) Proceedings of The First Asian Pacific Conference on Biomechanics. Emerging Science and Technology in Biomechanics. The Japan Society of Mechanical Engineers, Osaka, Japan, pp. 201-202. 497 Adam, Clayton & Swain, Michael (2010) The effect of friction on indenter force and pile-up in numerical simulations of bone nanoindentation. In Holt, C, Evans, S L, Jacobs, C, Walker, B, Atienza, C, & Middleton, J (Eds.) Proceedings of the 9th International Symposium on Computer methods in Biomechanics and Biomedical Engineering. Arup, United Kingdom, pp. 1-6. 411 23 Adams, Bradley, Gallage, Chaminda, & Look, Burt (2010) Assessment of pile driving refusal using the standard test (SPT). In Chin, C, Massey, C, Pinches, G, Williams, A, & McMorran, T (Eds.) Proceedings of the 11th IAEG (International Association for Engineering Geology) Congress. CRC Press/Taylor & Francis Group, United Kingdom, pp. 2641-2648. 893 Adkins, Barbara, Guthrie, Diane, & Summerville, Jennifer (2001) Tenure Security and Private Renters in Queensland. In Proceedings of the National Housing Conference 2001. Queensland Department of Housing, Brisbane, Qld, pp. 1-19. 937 Afara, Isaac, Pawlak, Zenon, & Oloyede, Adekunle (2011) Optical non-destructive evaluation of articular cartilage integrity: A review. In Cowled, C J L (Ed.) Proceedings of the First International Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing. Queensland University of Technology, Australia, pp. 352-355. 292 Agha Zadeh, Ramin, Ghosh, Arindam, Ledwich, Gerard, & Zare, Firuz (2009) Online estimation of signal parameters in the presence of harmonic and noise distortion. In Mertens, A (Ed.) Proceedings of the 13th European Conference on Power Electronics and Applications. Institute of Electrical and Electronics Engineers Inc., Online, pp. 1-10. 289 3 Ahmad, Zaini & Thambiratnam, David (2008) Energy absorption performance of foam-filled conical tubes under axial and oblique loadings. In Chaari, F (Ed.) Proceedings of the 4th International Conference on Advances in Mechanical Engineering and Mechanics. ICAMEM2008 Organization Committee, Tunisia, pp. 1-6. Ahmad, Zaini, Thambiratnam, David, & Tan, Andy (2008) Effect of foam filling on the dynamic axial crushing of thin-walled conical tubes. In Mahendran, M (Ed.) Proceedings of the Fifth International Conference on Thin-Walled Structures. Queensland University of Technology, Australia, pp. 679-686. Ahmad, Zaini, Thambiratnam, David, & Tan, Andy (2006) Impact and energy absorption of foam-filled conical frusta tubes. In Wai, S H & Sirikijpanickhul, A (Eds.) Faculty of BEE Infrastructure Theme Conference 2006 Conference Proceedings. Queensland University of Technology, Australia, pp. 77-94. Ahmad, Zaini, Thambiratnam, David, & Tan, Chit (2007) Computer Modeling and Analysis of Foam-filled Conical Tube under Axial Loading. In Zingoni, A (Ed.) Proceedings of the Third international Conference on Structural Engineering, Mechanics and Computation. Millpress Science Publishers, CD Rom, pp. 1-6. Ahmad, Zaini, Thambiratnam, David, & Tan, Chit (2007) A Numerical Study on the Axial Loading and Energy Absorption of Foam-filled Conical Tubes. In Li, Q M, Lok, T S, & Huang, F L (Eds.) Proceedings of the 7th International Conference on Shock & Impact Loads on Structures. CI-Premier Conference Organization, China, pp. 99-106. 3 Ahmed, Saber, Brown, Richard, Rasul, Mohammad, & Duran, Jose Esteban (2011) Flow field investigation in a water treatment reactor using computational fluid dynamics. In Matsumoto, Y (Ed.) Proceedings of the ASME-JSME-KSME Joint Fluids Engineering Conference 2011. ASME-JSME-KSME, CD Rom, pp. 1-7. 321 Ahmed, Saber, Brown, Richard, Rasul, Mohammad, & Duran, Jose Esteban (2011) Numerical simulation of flow in a photocatalytic reactor containing baffles. In Matsumoto, Y (Ed.) Proceedings of the ASME-JSME-KSME Joint Fluids Engineering Conference 2011. ASME-JSME-KSME, CD Rom, pp. 1-7. 1 Ahmed, Saber, Rasul, Mohammad, Brown, Richard, & Hassan, N. (2011) CFD simulation of turbulence promoters in a water treatment reactor. In Morris, T (Ed.) Proceedings of the NAFEMS World Congress 2011 - A World of Engineering Simulation. NAFEMS, United Kingdom, pp. 1-11. 352 Ahmed, Saber, Rasul, Mohammad, Brown, Richard, & Hassan, N. (2010) Computational fluid dynamics analysis of a flat plate photocatalytic reactor for storm and wastewater reuse. In Li, J (Ed.) Proceedings of the 13th Asian Congress of Fluid Mechanics (13ACFM)-2010. Bangladesh Society of Mechanical Engineers, Bangladesh, pp. 529-532. 311 Ahmed, Saber, Rasul, Mohammad, Martens, Wayde, & Brown, Richard (2010) A review of the role of operating parameters in heterogeneous photo catalytic water purification. In Muzi, F, Yuji, W, Rosen, M, Dodds, S, Sobik, M, Perryman, R, et al. (Eds.) Proceedings of the 5th IASME/WSEAS Conference on Energy and Environment. World Scientific and Engineering Academy and Society (WSEAS), United States, pp. 178-183. Ahmed, Saber, Rasul, Mohammad, Martens, Wayde, & Brown, Richard (2009) Sustainable reuse of storm/waste-water resources: A review on solar photocatalytic purification processes. In Rasul, M (Ed.) Proceedings of the Central Region Engineering Conference - CREC 2009. Engineers Australia, Australia, pp. 1-7. Ahsan, Mohammed, Tesfamichael, Tuquabo, Bell, John, & Blackford, Mark (2009) Microstructural characterization of electron beam evaporated tungsten oxide films for gas sensing applications. In Siegele, R (Ed.) Proceedings of the 16th AINSE Conference on Nuclear and Complementary Techniques of Analysis. AINSE Ltd, Online, pp. 1-4. 379 Ahuja, Vanita & Yang, Jay (2005) Towards IT enabled supply chain communication in construction project management. In Love, P, Egbu, C, Ribeiro, F, Davidson, C, & Dimitrijevic, B (Eds.) Information and Knowledge Management in a Global Economy: Challenges and Opportunities for Construction Organisations. CIB W102 and Edith Cowan University, Portugal, Lisbon, pp. 1-13. Ahuja, Vanita & Yang, Jay (2006) Web Based Communication for Construction Project Management. In Nwagboso, C & Georgakis, P (Eds.) Proceedings of WCAEBE 2006 - Accelerating Excellence In The Built Environment. University of Wolverhampton, CD Rom, pp. 1-8. 1,510 Ahuja, Vanita, Yang, Jay, & Shankar, Ravi (2006) Strategic Use of ICT by Construction Organisations - Requirements and Implementation Issues. In Kumar, B & Swarup, P R (Eds.) Proceedings of the World IT Conference for Design and Construction: INCITE / ITCSED 2006. Construction Industry Development Council, India, pp. 235-250. Aish, Robert, Frankel, James, Frazer, John, & Patera, Anthony (2001) Computational Construction Kits for Geometric Modeling and Design. In Hughes, J F & Sequin, C H (Eds.) Proceedings of the 2001 Symposium on Interactive 3D graphics. Association for Computing Machinery (ACM), USA, NY, New York, pp. 125-128. 7 Akman, Nesrin, Yarlagadda, Prasad, & Kosse, Vladis (2005) Web Based Vibration Monitoring. In Narayanan, S & Yarlagadda, P (Eds.) Proceedings of the 1st International Conference on Manufacturing and Management - 2004 (GCMM - 2004). Narosa Publishing House, India, pp. 32-37. Aktarujjaman, M, Kashem, Mohammad, Negnevitsky, Michael, & Ledwich, Gerard (2005) Dynamics of a Hydro-Wind Hybrid Isolated Power System. In Negneviysky, M (Ed.) AUPEC 2005 CD Proceedings: Australian Universities Power Engineering Conference. University of Tasmania, Australia, pp. 1-6. Aktarujjaman, Md, Haque, M, Muttaqi, K, Negnevitsky, Michael, & Ledwich, Gerard (2007) Control Stabilization of Multiple Distributed Generation. In Islam, S (Ed.) Proceedings of the 2007 Australasian Universities Power Engineering Conference. Curtin University of Technology, Australia, pp. 636-640. 582 12 Aktarujjaman, Md, Kashem, Mohammad, Negnevitsky, Michael, & Ledwich, Gerard (2006) Energy Storage System for Reduction of Mid-line Voltage Variation of a DFIG Wind Turbine Connected to a Weak Grid. In Kalam, A (Ed.) Proceedings of the 2006 Australasian Universities Power Engineering Conference. Victoria University, Australia, pp. 1-6. Aktarujjaman, Md, Kashem, Mohammad, Negnevitsky, Michael, & Ledwich, Gerard (2006) Smoothing Output Power of a Doubly Fed Wind Turbine with an Energy Storage System. In Victoria University (Ed.) Proceedings of the 2006 Australasian Universities Power Engineering Conference. Victoria University, Australia, pp. 1-8. 914 Al-Ani, Ahmed & Deriche, Mohamed (2001) A Dempster-Shafer Theory of Evidence Approach for Combining Trained Neural Networks. In Proceedings of the 2001 IEEE International Symposium on Circuits and Systems (CD Rom). Institute of Electrical and Electronics Engineers, Piscataway, USA, pp. 250-280. 8 Al-Ani, Ahmed & Deriche, Mohamed (2002) Feature Selection using a Mutual Information Based Measure. In Suen, C, Kasturi, R, & Laurendeau, D (Eds.) Proceedings of the 16th International Conference on Pattern Recognition. Institute of Electrical and Electronics Engineers, Piscataway, USA, pp. 82-85. 20 14 Al-Ani, Ahmed & Deriche, Mohamed (2002) A New Algorithm for Multi-channel EEG Signal Analysis using Mutual Information. In Principe, J & Bourlard, H (Eds.) Proceedings of the 2002 IEEE International Conference on Acoustics, Speech and Signal Processing. Institute of Electrical and Electronics Engineers, Piscataway, USA, pp. 2961-2964. Al-Ani, Ahmed & Deriche, Mohamed (2001) An Optimal Feature Selection Technique Using the Concept of Mutual Information. In Proceedings of the 6th International Symposium on Signal Processing and its Applications. Universiti Teknologi Malaysia, Johor, Malaysia, pp. 477-480. 25 18 Al-Shiekh Khalil, Wael, Goonetilleke, Ashantha, & Dawes, Leslie (2003) Correlation of Soil Data with Treatment Performance of Subsurface Effluent Disposal Systems. In Patterson, Robert A (Ed.) Proceedings of the On-site '03 Conference - Future Directions for On-site Systems : Best Management Practice. Lanfax Laboratories, Australia, New South Wales, pp. 225-232. 1,260 Al-Shiekh Khalil, Wael, Goonetilleke, Ashantha, & Duval (Rigby), Portia (2004) Use of undistrubed soil columns to evaluate soil capability to renovate on-site sewage treatment system effluent. In Converse, J (Ed.) Proceedings of the 10th National Symposium on individual and Small Community Sewage Systems. American Society of Agricultural Engineers, Michigan, USA, pp. 201-209. 822 1 Alder, Sarah & Yang, Jay (2005) The Exploration of Attitudinal Issues and Decision-Making of Key Stakeholders in Sustainable Housing Development. In Scott, K & Gardiner, D (Eds.) Proceedings of the 2005 International Conference on Engaging Communities. Department of Communities and Main Roads, Queensland Government, Australia, pp. 1-9. Ali, Rehaan, Nata-Atmadja, Andreas, & Gudimetla, Prasad (2007) Behaviour of Tyre Reinforced Unsealed Pavement. In Taylor, B, Patten, M, & Ameratunga, J (Eds.) Proceedings of the 10th Australia New Zealand Conference on Geomechanics 2007. Carillon Conference Management Pty Limited, Australia, pp. 418-423. 371 Alizadeh, Shahab & Khouzam, Kamel (2005) Economical and Environmental Study of a Liquid Desiccant Solar Air Conditioner. In Sheinkoph, K (Ed.) Proceedings of International Solar Energy Society 2005 Solar World Congress. International Solar Energy Society, CD Rom, pp. 1-6. Alizadeh, Shahab & Khouzam, Kamel (2004) A Study into the Potential of Using Liquid Desiccant Solar Air-Conditioner with Gas Backup in Brisbane - Queensland. In ANZSES (Ed.) Proceedings of Australian and New Zealanc Solar Energy Society (ANZSES). SOLAR 2004: Life, the Universe & Renewables. ANZSES, CD ROM, pp. 1-10. Alruwili, Abdalaziz, Gudimetla, Prasad, & Yarlagadda, Prasad (2009) The corrosion inhibiting effect of sodium benzoate on steel in the Arabian gulf region. In Wiliem, A & Surawski, N (Eds.) Proceedings for the 3rd Smart Systems Postgraduate Student Conference. Queensland University of Technology, Faculty of Built Environment and Engineering, CD Rom, pp. 139-143. 28 Altmann, Joshua & Mathew, Joseph (2001) DWPA Multiple Band-Pass Filtering for Extraction of Bearing Fault Transients from a Strong Continuous Signal. In Proceedings of the Asia-Pacific Vibration Conference 2001: Volume II. Jilin Science and Technology Press, Hangzhou, China, pp. 772-776. Alves-Filho, Odilio, Senadeera, Wijitha, & Eikevik, Trygve (2010) Pet food from bovine origin drying by green heat pump technology and fluidization. In Fito, P & Toldra, F (Eds.) Proceedings of the International Conference on Food Innovation - FoodInnova 2010. University of Politecnica of Spain, Spain, pp. 1-4. 141 Alwi, Sugiharto, Hampson, Keith, & Mohamed, S (1999) Investigation into the Relationship between Rework and Site Supervision in High Rise Building Construction in Indonesia. In Proceedings of the International Conference on Construction Process Re-engineering '99. University of New South Wales, Sydney, New South Wales, pp. 189-195. 1,272 Alwi, Sugiharto, Hampson, Keith, & Mohamed, Sherif (2002) Factors Influencing Contractor Performance in Indonesia: A Study of Non Value-Adding Activities. In Wangsadinata, W (Ed.) Proceedings of the International Conference on Advancement in Design, Construction, Construction Management and Maintenance of Building Strutures. RIHS, Bandung, Indonesia, pp. 20-34. 1,589 Alwi, Sugiharto, Hampson, Keith, & Mohamed, Sherif (2002) Non Value-Adding Activities in Australian Construction Projects. In Wangsadinata, W (Ed.) Proceedings of the International Conference on Advancement in Design, Construction, Construction Management and Maintenance of Building Strutures. RIHS, Bandung, Indonesia, pp. 270-280. 1,621 Alwi, Sugiharto, Hampson, Keith, & Mohamed, Sherif (2002) Non Value-Adding Activities: A Comparative Study of Indonesian and Australian Construction Projects. In Formoso, C T & Ballard, G (Eds.) Proceedings of the 10th Conference of the International Group for Lean Construction. Federal University of Rio Grande do Sul, Porto Alegre, Brazil, pp. 627-638. 1,920 Alwi, Sugiharto, Kajewski, Stephen, & Hampson, Keith (2006) Investigation into the Relationship Between Just-in-Time (JIT) Training and Productivity in Building Construction in Indonesia. In El-Baldry, M (Ed.) The 1st International Construction Specialty Conference 2006. Canadian Society for Civil Engineering, Canada, pp. 1-7. 705 Alwi, Sugiharto, Mohamed, Sherif, & Hampson, Keith (2002) Waste in the Indonesian Construction Projects. In Boshoff, F (Ed.) Proceedings of the 1st CIB-W107 International Conference - Creating a Sustainable Construction Industry in Developing Countries. CSIR, Pretoria, South Africa, pp. 305-315. 2,471 Amadi-Echendu, Joe, Willett, Roger, Brown, Kerry, Lee, Jay, Mathew, Joseph, Vyas, Nalinaksh, et al. (2007) What is Engineering Asset Management? In Gelman, L (Ed.) Proceedings of the 2nd World Congress on Engineering Asset Management and the 4th International Conference on Condition Monitoring. Coxmoor Publishing Company, CD Rom, pp. 116-129. 4,577 Ambrose, Michael, Tucker, Selwyn, & Drogemuller, Robin (2002) Exploring A Building's Life Cycle Energy Through CAD. In Burn, S (Ed.) 9th International Conference on Durability of Building Materials & Components. Australia, Queensland, Brisbane, -. Amin, Md Al & Karim, Azharul (2011) Maximising the manufacturer performance value through lean initiatives using cost based model. In Cowled, C J L (Ed.) Proceedings of the First International Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing. Queensland University of Technology, Australia, pp. 332-337. 220 Amin, Md Al, Karim, Azharul, & Yarlagadda, Prasad (2010) Assessing the leanness in product design: a model for planned design reuse. In Butdee, S, Sapsaman, T, & Yarlagada, P (Eds.) Proceedings of the 10th Global Congress on Manufacturing and Management - Innovative Design for Sustainability In Manufacturing and Management. Global Congress on Manufacturing and Management Board/King Mongkut's University of Technology North, Thailand, pp. 39-50. 230 Amin, Zakaria Mohd., Hawlader, M., & Karim, Azharul (2011) A solar assisted heat pump system for desalination. In Rahman, M A & Ali Jaffar, M (Eds.) Proceedings of the 2011 International Conference on Mechanical, Automotive and Aerospace Engineering. International Islamic University Malaysia, Malaysia, pp. 1-6. Anapayan, Tharmarajah & Mahendran, Mahen (2009) Effect of section geometry on the lateral distortional buckling of litesteel beams. In Wiliem, A & Surawski, N (Eds.) Proceedings for the 3rd Smart Systems Postgraduate Student Conference. Queensland University of Technology, Faculty of Built Environment and Engineering, CD Rom, pp. 71-76. 67 Anapayan, Tharmarajah & Mahendran, Mahen (2009) Improvements to the design of LiteSteel beams undergoing lateral distortional buckling. In Lam, D (Ed.) Proceedings: 2009 Steel Concrete Composite and Hybrid Structures. Research Publishing Services, Singapore, pp. 767-774. 205 Anapayan, Tharmarajah, Mahendran, Mahen, & Mahaarachchi, Dhammika (2011) Ineslastic bending capacity of litesteel beams. In Ho, L H (Ed.) Proceedings of the 7th International Conference on Steel and Aluminium Structures. Research Publishing Services, Singapore, pp. 179-185. 262 Andrews, Natalie (2002) Foamed Bitumen Mix: Soil or Asphalt? In Thau, M, Larsen, H, Ulidtz, P, Nielsen, E, & Bendtsen, H (Eds.) Proceedings of the 9th International Conference on Asphalt Pavements. International Society for Asphalt Pavements, Copenhagen, Denmark, pp. 1-11. Ang, Vincent & Gray, Jason (2006) Inhibitors of Ecologically Sustainable Development in the Australian Construction Industry. In Best, R & Runeson, G (Eds.) Proceedings of Australasian Universities Building Educators Association 2006. AUBEA, Australia, pp. 1-12. 800 Appold, Stephen & Baker, Douglas (2010) When the shoe doesn't quite fit: Regulating large commercial airports with expanding roles. In Viegas, J & Macario, R (Eds.) Proceedings of the 12th WCTR World Conference on Transport Research. World Conference on Transport Research Society, Portugal, pp. 1-26. 226 Armitage, Lynne (1997) Tertiary Education for the Property Profession - The Quality Imperative. In Readings In Property Economics. Aust. Institute of Valuers and Land Economist, Australia, pp. 283-296. Armstrong, Helen (2001) Investigating Queensland's Cultural Landscapes: Whose Heritage? In Heritage Landscapes: Understanding Place And Communities. Southern Cross University Press, Lismore, NSW, pp. 81-90. Armstrong, Helen (2002) Landscapes of Hope: Migrant Spaces on the Margins. In Akkach, S (Ed.) Proceedings of the 3rd International Symposium of the Centre for Asian and Middle Eastern Architecture. University of Adelaide, Adelaide, South Australia, pp. 203-215. Armstrong, Helen (2001) Migrant Place-Making: Sustainable Collaboration in the Built Environment. In Towards Sustainability in the Built Environment. Queensland University of Technology, Brisbane, Queensland, pp. 434-443. Armstrong, Helen (2004) New Forms of Green for Mega-cities: Peri- and Inter-urban Agricultural Space. In Lawson, G, Armstrong, H, & Chenoweth, A (Eds.) AILA 2004 National Conference. ALIA, Australia, pp. 1-11. Armstrong, Helen (2011) Re-enchanting the industrial in the city. In Abbate, A, Polakit, K, & Kennedy, R (Eds.) Proceedings of the 3rd International Subtropical Cities Conference. Florida Atlantic University, United States, pp. 80-92. Armstrong, Helen (2002) Sustaining Cultural Landscapes as Sites of Production. In Moulis, A & Macarthur, J (Eds.) Proceedings of the XIXth Annual Conference of the Society of Architectural Historians Australia and New Zealand. SAHANZ, Brisbane, Queensland, pp. 1-18. Arndt, Owen & Troutbeck, Rodney (2005) Relationship Between Unsignalised Intersection Geometry and Accident Rates. In The Transportation Research Board (TRB) (Ed.) Compendium of the 3rd International Symposium on Highway Geometric Design. The Transportation Research Board (TRB), United States, Illinois, Chicago, pp. 1-22. Arnold, Morgan, Iskander, Daoud, & Zoubir, Abdelhak (1995) Testing Gaussianity With The Characteristic Function. In The 1995 International Conference on Acoustics, Speech, and Signal Processing Volume 3. The Institute of Electrical & Electronics Engineer, USA, 0-0. 3 Arrillaga, Jos, Watson, Neville R., Perera, Lasantha, & Liu, Y. H. (2004) Pulse multiplication in forced-commutated current source converters by DC ripple reinjection. In Walker, G (Ed.) Proceedings of the 2004 Australasian Universities Power Engineering Conference. University of Queensland, Australia, Queensland, Brisbane, pp. 1-5. 170 Arsat, Rashida, Breedon, Michael, Shafiei, Mahnaz, Kalantar-zadeh, Kourosh, Gilje, Scott, Kaner, Richard, et al. (2008) Graphene-like nano-sheets based LiTaO3 surface acoustic wave NO2 gas sensor. In Gerlach, G (Ed.) Eurosensors XXII: Proceedings of the 22nd International Conference on Solid-State Sensors, Actuators, Microsystems and Nanosystems. Technical University of Dresden, Germany, pp. 1132-1135. 255 Arsat, Rashida, Breedon, Michael, Shafiei, Mahnaz, Kalantar-zadeh, Kourosh, Wlodarski, Wojtek, Gilje, Scott, et al. (2008) Graphene-like nano-Sheets/36(degrees) LiTaO3 surface acoustic wave hydrogen gas sensor. In French, P & Siciliano, P (Eds.) Proceedings of the 7th Annual International IEEE Sensors Conference 2008. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 188-191. 14 255 Asghar, Naveed, Enderle, Werner, & Holzach, H (2003) Attitude Dynamic Simulations Based on Air Bearing Simulator System. In Mee, David J (Ed.) 10th Australian International Aerospace Congress. Engineers Australia, Australia, Australian Capital Territory, Barton, pp. 1-9. Ashworth, Allan, Betts, Martin, Bowden, Andrew, Goulding, Jack, Newton, Rita, & Williams, Aled (2003) Built environment education and research : making connections. In Anderson, L & Alexander, K (Eds.) Proceedings of the CIB Working Commission W89 International Conference on Building Education and Research 2003. The University of Salford, United Kingdom, pp. 2-9. Athaudage, Chandranath & Jayalath, Dhammika (2005) Blind estimation of residual timing error in OFDM receivers: a non-data-aided maximum-likelihood approach. In Walke, B, David, K, Haardt, M, & Mahonen, P (Eds.) Proceedings of the 2005 IEEE 16th International Symposium on Personal, Indoor and Mobile Radio Communications. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 2476-2480. 339 3 Athaudage, Chandranath & Jayalath, Dhammika (2003) Delay-spread estimation using cyclic-prefix in wireless OFDM systems. In Ching, P C & Jenkins, W (Eds.) Proceedings of the 28th IEEE International Conference on Audio, Speech and Signal Processing. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 668-671. 1,960 4 3 Athaudage, Chandranath & Jayalath, Dhammika (2003) Enhanced MMSE channel estimation using timing error statistics for wireless OFDM systems. In Wysocki, T (Ed.) Proceedings of the 7th International Symposium on DSP for Communication Systems. DSP for Communication Systems, Australia, pp. 1-10. Athaudage, Chandranath & Jayalath, Dhammika (2003) Low-complexity channel estimation for wireless OFDM systems. In Gong, K (Ed.) Proceedings of the 14th IEEE International Symposium on Personal, Indoor and Mobile Radio Communications. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 521-525. 840 23 16 Athaudage, Chandranath & Jayalath, Dhammika (2003) A novel RMS delay-spread estimation technique for wireless OFDM systems. In Yap, K H & Xiao, G X (Eds.) Proceedings of the 2003 Joint Conference of the 4th International Conference on Information, Communications and Signal Processing, 2003 and the 4th Pacific Rim Conference on Multimedia. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 626-630. 1,447 1 Athaudage, Chandranath, Wang, J., & Jayalath, Dhammika (2006) An efficient framework to exploit frequency diversity in OFDM: Precoding with adaptive subcarrier selection. In Neuvo, Y & Latva-aho, M (Eds.) Proceedings of the 17th Annual International Symposium on Personal, Indoor and Mobile Radio Communications. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 1-5. 303 3 Athaudage, Chandranath, Zhang, Ming, Jayalath, Dhammika, & Abhayappala, Thushara (2008) Classifier Based Low-Complexity MIMO Detection for Spatial Multiplexing Systems. In Sadeghi, P (Ed.) Proceedings of the 2008 Australian Communications Theory Workshop. Institute of Electrical and Electronic Engineers (IEEE), United States, pp. 1-5. 260 Au-Yeung, Benson, Saad, Andrew, & Yigitcanlar, Tan (2010) Sustainable urban infrastructure management: integration of urban computer modelling. In Yates, P, Kunzmann, K, & Yigitcanlar, T (Eds.) Proceedings of The 3rd Knowledge Cities World Summit - From Theory to Practice. World Capital Institute, City of Melbourne and Office of Knowledge Capital, Australia, pp. 614-628. 773 Au-Yeung, Benson, Yigitcanlar, Tan, & Mayere, Severine (2009) Brisbane urban growth model: integrated sustainable urban and infrastructure management in Brisbane. In Wang, L & Jaiswal, S (Eds.) Conference Proceedings of the Second Infrastructure Theme Postgraduate Conference 2009. Queensland University of Technology, Australia, Queensland, Brisbane, pp. 239-249. 2,262 Au-Yeung, Benson, Yigitcanlar, Tan, & Mayere, Severine (2010) Integrated sustainable urban infrastructure management: the Brisbane urban growth model. In Yigitcanlar, T (Ed.) Rethinking Sustainable Development: Urban Management, Engineering, and Design. IGI Global, United States, pp. 38-55. Au-Yeung, Benson, Yigitcanlar, Tan, & Mayere, Severine (2011) Integrated sustainable urban infrastructure management: The Brisbane urban growth model. In "Information Resources Management Association (Ed.) Green Technologies: Concepts, Methodologies, Tools and Applications. IGI Global, United States of America, pp. 902-919. Au-Yeung, Benson, Yigitcanlar, Tan, Mayere, Severine, & Lau, Chean-Piau (2010) Brisbane urban growth model: an integrated infrastructure management framework for Brisbane, Australia. In Yigitcanlar, T (Ed.) Sustainable Urban and Regional Infrastructure Development: Technologies, Applications and Management. IGI Global, United States, pp. 277-294. 2,305 Au-Yeung, Benson, Yigitcanlar, Tan, Mayere, Severine, & Lau, Chean-Piau (2011) Brisbane urban growth model: An integrated infrastructure management framework for Brisbane, Australia. In "Information Resources Management Association (Ed.) Green Technologies: Concepts, Methodologies, Tools and Applications. IGI Global, United States of America, pp. 283-300. Avery, Philip & Mahendran, Mahen (1996) Finite Element Analysis of Hollow Flange Beams with Web Stiffeners. In Recent Research and Developments in Cold-fromed Steel Design and Construction: 13th International Conference on Cold-fs. University of Missouri-Rolla, St Louis, Missouri. 7 27 Awad, Z. K., Aravinthan, T., Zhuge, Y., & Gonzalez, F. (2011) Multi-objective design optimization of an innovative fibre composite sandwich panel for civil engineering applications. In Fragomeni, Sam, Venkatesan, Srikanth, Lam, Nelson T.K., & Setunge, Sujeeva (Eds.) Incorporating Sustainable Practice in Mechanics and Structures of Materials: Proceedings of the 21st Australian Conference on the Mechanics of Structures and Materials. CRC Press, Boca Raton, FL, pp. 801-806. 11 3 Aydal, Emine, Paige, Richard, Utting, Mark, & Woodcock, Jim (2009) Putting formal specifications under the magnifying glass: Model-based testing for validation. In Offutt, J & Runeson, P (Eds.) Proceedings of the 2nd International Conference on Software Testing, Verification and Validation. Institute of Electrical and Electronics Engineers Inc., United States, pp. 131-140. 11 3 Aydal, Emine, Utting, Mark, & Woodcock, Jim (2008) A comparison of state-based modelling tools for model validation. In Paige, R & Meyer, B (Eds.) Objects, Components, Models and Patterns: 46th International Conference Proceedings. Springer, Germany, pp. 278-296. 7 5 Azemi, Ghasem, Senadji, Bouchra, & Boashash, Boualem (2002) Estimating the Instantaneous Frequency of Time-varying Mono-component Signals in a Mobile Communication Environment. In Chandran, V (Ed.) Proceedings of the 4th Australasian Workshop on Signal Processing and Applications 2002. Queensland University of Technology Press, Brisbane, Queensland, pp. 109-112. Azemi, Ghasem, Senadji, Bouchra, & Boashash, Boualem (2003) Estimating the Ricean K-Factor for Mobile Communication Applications. In SuviSoft (Ed.) 7th International Symposium on Signal Processing and its Applications. Institute of Electrical and Electronics Engineers Inc., Piscataway, NJ, USA, pp. 311-314. 10 7 Azemi, Ghasem, Senadji, Bouchra, & Boashash, Boualem (2001) Estimation of the Velocity of Mobile Units in Micro-Cellular Systems Using the Instantaneous Frequency of the Received Signals. In Proceedings of the 2001 IEEE International Conference on Acoustics, Speech, and Signal Processing. Institute of Electrical and Electronics Engineers, Piscataway, USA, pp. 1025-1028. 2 Azemi, Ghasem, Senadji, Bouchra, & Boashash, Boualem (2003) Instantaneous Frequency Estimation in the Presence of Complex Multiplicative and Additive Noise: Application to Jammer Excision in Wireless Environments. In Karimi, M (Ed.) Proceedings of the 11th Iranian Conference on Electrical Engineering. Shiraz University, Shiraz-Iran, Iran, pp. 612-619. Azemi, Ghasem, Senadji, Bouchra, & Boashash, Boualem (2002) Instantaneous Frequency Estimation of Frequency Modulated Signals in the Presence of Multiplicative and Additive Noise: Application to Mobile Communication Systems. In Castanie, F (Ed.) Proceedings of the 11th European Signal Processing Conference. European Association for Signal, Speech and Image Processing, Toulouse, France, pp. 441-444. Azemi, Ghasem, Senadji, Bouchra, & Boashash, Boualem (2003) Mobile Unit Velocity Estimation in Micro-Cellular Systems Using the ZCR of the Instantaneous Frequency of the Received Signal. In SuviSoft (Ed.) 7th International Symposium on Signal Processing and its Applications. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 289-292. 1 Azemi, Ghasem, Senadji, Bouchra, & Boashash, Boualem (2003) A Novel Estimator for the Velocity of a Mobile Station in a Micro-Cellular System. In ISCAS 2003 Organising Committee (Ed.) CD Proceedings of the 2003 IEEE International Symposium on Circuits and Systems. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 212-215. 5 Azemi, Ghasem, Senadji, Bouchra, & Boashash, Boualem (2001) Velocity Estimation in Cellular Systems Based on the Time-Frequency Characteristics of the Received Signal. In Proceedings of the 6th International Symposium on Signal Processing and its Applications. Universiti Teknologi Malaysia, Johor, Malaysia, pp. 509-512. 6 2 Bahadornejad, Momen & Ledwich, Gerard (2004) On-Line Load Characterization by Sequential Peeling. In Kuan, Lim Ah (Ed.) Powercon 2004. CD ROM, Singapore, pp. 1-6. 1 1 Bahadornejad, Momen & Ledwich, Gerard (2004) On-Line Voltage Collapse Prediction Considering Composite Load and On-Load Tap Changer. In Saha, T (Ed.) Australasian Universities Power Engineering Conference (AUPEC) 2004 Proceedings. AUPEC, CD ROM, pp. 1-6. Bahadornejad, Momen & Ledwich, Gerard (2003) Studies in System Thevenin Impedance Estimation from Normal Operational Data. In Goel, L (Ed.) 6th International Power Engineering Conference. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 93-98. 3 Bahadornejad, Momen & Ledwich, Gerard (2003) Studies in the OLTC Effect on Voltage Collapse Using Local Load Bus Data. In AUPEC 2003 Organising Committee (Ed.) Australian Universities Power Engineering Conference 2003 (AUPEC 2003). University of Canterbury, New Zealand, New Zealand, Christchurch, pp. 1-6. Bahadornejad, Momen & Ledwich, Gerard (2003) System Thevenin Impedance Estimation Using Signal Processing on Load Bus Data. In Yung, Ki M (Ed.) 6th Int'l Conference on Advances in Power System Control, Operation and Management. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 274-279. 15 Bai, Ruixiang, Chen, Zhenhuan, & Yan, Cheng (2007) Cross section design of holey optical fibers with coating based on stress analysis in tension. In Qian, L (Ed.) Proceedings of ICMEM2007. Science Press USA Inc, pp. 952-955. 103 Bai, Ruixiang & Yan, Cheng (2007) Effects of surface cracks and coating on fracture behaviour of microstructured silica optical fibers. In Tan, A, Veidt, M, Daniel, B, McArre, R, Meehan, P, Albermani, F, et al. (Eds.) Proceedings of the Fifth Australasian Congress on Applied Mechanics. Engineers Australia, Australia, pp. 551-556. Bai, Zhengdong & Feng, Yanming (2003) GPS Water Vapour Estimation Using Interpolated Surface Meteorological from Australian Automatic Weather Stations. In Mee, D J (Ed.) 10th Australian International Aerospace Congress. Engineers, Australia, Australia, Australian Capital Territory, Barton, pp. 1-19. Bailey, David, Campbell, Duncan, & Goonetilleke, Ashantha (2003) An Experiment with Approximate Reasoning in Site Selection Using 'InfraPlanner'. In Lovell, Brian C, Fookes, Clinton B, Maeder, Anthony J, & Campbell, Duncan A (Eds.) Proceedings of the 8th Australian and New Zealand intelligent information systems conference. Queensland University of Technology, Australia, Queensland, Brisbane, pp. 165-170. 461 Bailey, David, Goonetilleke, Ashantha, & Campbell, Duncan (2003) Information Analysis and Dissemination for Site Selection Decisions Using a Fuzzy Algorithm in GIS. In Chu, Wesley (Ed.) Proceedings of the 2nd IASTED Int'l Conf. on Information and Knowledge Sharing. ACTA Press, United States of America, California, Anaheim, pp. 223-228. 224 Bailey, David, Goonetilleke, Ashantha, & Deriche, Mohamed (2003) A Decision Support System for Site Selection of Large-Scale Infrastructure Facilities Using Natural Language. In Chattopadhyay, Gopi (Ed.) Proceedings of the 5th Operations Research Conference of Aust. Society for Operations Research QLD branch on: Operations Research into the 21st Century. ASOR QLD branch, Australia, Queensland, Brisbane, pp. 1-18. 306 Bailey, Tim, Upcroft, Ben, & Durrant-Whyte, Hugh (2006) Validation gating for non-linear non-Gaussian target tracking. In Carthel, C (Ed.) Proceedings of the 9th International Conference on Information Fusion. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 1-6. 279 19 Bajracharya, Bhishna, Donehue, Paul, & Baker, Douglas (2007) Master Planned Communities and Governance. In Hamnett, S (Ed.) Proceedings of the State of Australian Cities National Conference 2007. SOAC 2007, Australia, pp. 188-200. 1,230 Bajracharya, Bhishna & Khan, Shahed (2005) Adoption of Local Agenda 21 : Local Councils' Views on Sustainability Initiatives. In Yang, J, Brandon, P S, & Sidwell, A C (Eds.) Smart and Sustainable Built Environments. Blackwell, United Kingdom, pp. 311-320. Bajracharya, Bhishna & Khan, Shahed (2003) Collaborative Teaching in Planning Education: Benefits and Issues. In Austin, Tricia (Ed.) Proceedings of the ANZAPS 2003 Conference. Dept of Planning, Uni of Auckland, New Zealand, New Zealand, Auckland, pp. 55-63. Bajracharya, Bhishna & Khan, Shahed (2005) Planning for Sustainable Transit Oriented Development: The Case of South East Queensland. In Sidwell, A C (Ed.) QUT Research Week 2005 Conference Proceedings. Queensland University of Technology, CD Rom, pp. 1-14. 2 Bajracharya, Bhishna & Khan, Shahed (2006) Sustainability Frameworks for Transit Oriented Development in South East Queensland. In Childs, I & Hudson, B (Eds.) Queensland Geographical Perspectives. The Royal Geographical Society of Queensland Inc, Australia, Queensland, Milton, pp. 31-54. Bajracharya, Bhishna & Khan, Shahed (2005) Towards a Framework for Evaluating Potential Sites for Transit Supportive Development in South East Queensland. In Sayeg, P & Charles, P (Eds.) Proceedings of Emerging Futures: Smart Transport and Quality Design in Transit Oriented Development. Transport Roundtable Australasia Pty Ltd, Australia, Queensland, Brisbane, pp. 1-18. Bajracharya, Bhishna, Khan, Shahed, & Longland, Matt (2005) Regulatory and Incentive Mechanisms to Implement Transit Oriented Development (TOD) in South-East Queensland. In Troy, P (Ed.) State of Australian Cities : National Conference 05. Griffith University, Australia, Queensland, Brisbane, pp. 1-16. Bajracharya, Bhishna, Kumarasuriyar, Anoma, & Demirbilek, F Nur (2003) Vernacular Architecture in Queensland, Australia: Current Planning Issues and Opportunities. In Esin, Nur, Ozsoy, Ahsen, & Gulersoy, Nuran Zeren (Eds.) Proceedings of the Int'l Conference on Quality Urban Life: Policy Versus Practice. Urban and Environmental Planning and Research Centre, Istanbul Technical University, Turkey, pp. 412-422. 8,015 Bajwa, Shamas, Chung, Edward, & Kuwahara, Masao (2005) Performance evaluation of an adaptive travel time prediction model. In Smid, E (Ed.) Proceedings of the 8th International IEEE Conference on Intelligent Transportation Systems. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 1000-1005. 729 39 16 Bajwa, Shamas, Chung, Edward, & Kuwahara, Masao (2003) A travel time prediction method based on pattern matching technique. In Green, F K (Ed.) Proceedings of the 21st ARRB and 11th REAAA Conference: transport - our highway to a sustainable future. Australian Road Research Board, Australia, p. 1. 19 Baker, Brendan, Mcgreevy, Michael, Lucey, Simon, & Sridharan, Subramanian (2002) Audio-visual Speech Recognition: A Practical Implementation. In Chandran, V (Ed.) Proceedings of the 4th Australasian Workshop on Signal Processing and Applications 2002. Queensland University of Technology Press, Brisbane, Australia, pp. 39-42. Baker, Brendan & Sridharan, Sridha (2006) Speaker Verification Using Hidden Markov Models in a Multilingual Text-Constrained Framework. In Berkling, K & Torres Carrasquillo, P (Eds.) 2006 IEEE Odyssey - The Speaker and Language Recognition Workshop. Research Publishing Services, India, pp. 1-6. Baker, Brendan, Vogt, Robert, Mason, Michael, & Sridharan, Subramanian (2004) Improved Phonetic and Lexical Speaker Recognition through MAP Adaptation. In Garcia, J, Bimbot, F, & Rodriguez, J (Eds.) Proceedings of Odyssey 2004 - The Speaker and Language Recognition Workshop. Publidisa, Spain, pp. 91-96. 228 Baker, Brendan, Vogt, Robert, Mclaren, Mitchell, & Sridharan, Sridha (2009) Scatter difference NAP for SVM speaker recognition. In Nixon, M & Tistarelli, M (Eds.) Advances in Biometrics: Third International Conferences, ICB 2009 Proceedings [Lecture Notes in Computer Science, Volume 5558]. Springer, Germany, pp. 464-473. 7 3 Baker, Brendan, Vogt, Robert, & Sridharan, Subramanian (2005) Gaussian Mixture Modelling of Broad Phonetic and Syllabic Events for Text-Independent Speaker Verification. In Trancoso, I (Ed.) Eurospeech/Interspeech: Proceedings of the 9th European Conference on Speech Communication and Technology 2005. Institut fur Kommunikationsforschung und Phonetik (ISCA), Universitat Bonn, Germany, pp. 2429-2432. 342 19 Baker, Brendan, Vogt, Robert, & Sridharan, Subramanian (2004) Phonetic and Lexical Speaker Recognition in Reduced Training Scenarios. In Cox, F, Cassidy, S, Mannell, R, & Palethrope, S (Eds.) Proceedings of the 10th Australian International Conference on Speech Science and Technology. Australian Speech Science and Technology Association Inc, Canberra, ACT, pp. 551-556. Baker, Douglas (2006) Between a Rock and a Hard Place: Regional Planning for the Extractive Industry in SE Queensland. In Childs, I & Hudson, B (Eds.) Queensland Geographical Perspectives. Royal Geographical Society of Queensland, Australia, pp. 73-89. Baker, Douglas & Donehue, Paul (2005) Measuring Policy Effectiveness: First Nations' Participation in Environmental Assessment in Northern British Columbia, Canada. In Star, C (Ed.) Ecopolitics XVI: Transforming Environmental Governance for the 21st Century Conference Proceedings. Ecopolitics Association of Australasia / Centre for Governance and Public Policy, Australia, pp. 1-25. 203 Baker, Douglas & Dungey, Kelly (2007) The Integration of Risk Management into the Design of the Airport Metropolis. In McCarthy, C & Matthewson, G (Eds.) Inhabiting Risk: Proceedings of the 3rd Conference of the Interior Design / Interior Architecture Educators Association. WelTec, Victoria University of Wellington and Massey University, New Zealand, pp. 9-16. 904 Baker, Douglas & Freestone, Robert (2011) The airport city: A new business model for airport development. In Macario, R & Van de Voorde, E (Eds.) Critical Issues in Air Transport Economics and Business. Routledge, United Kingdom, pp. 150-164. 14 5 Baker, Douglas & Freestone, Robert (2008) Reconciling public and private interests in the planning and development of airports: the Australian experience, 1995-2008. In Silver, C (Ed.) Proceedings of the 13th International Planning History Society Conference: Public versus private planning: Themes, trends and tensions. University of Florida, CD Rom, pp. 474-484. 1,130 Baker, Douglas & Hendy, Richard (2005) Planning for Sustainable Construction Aggregate Resources in Australia. In Sidwell, A C (Ed.) Proceedings of QUT Research Week 2005. Queensland University of Technology, CD Rom, pp. 1-12. 421 4 Baker, Douglas & Rapaport, Eric (2005) The Science of Assessment: Identifying and Predicting Environmental Impacts. In Hanna, K (Ed.) Environmental Impact Assessment: Practice and Participation. Oxford University Press, Canada, pp. 33-52. Baker, Douglas & Rapaport, Eric (2005) The Science of Assessment: Identifying and Predicting Environmental Impacts. In Hanna, K (Ed.) Environmental Impact Assessment: Practice and Participation. Oxford University Press, Canada, pp. 33-52. Baker, Douglas, Sipe, Neil, & Gleeson, Brendan (2008) Performance-Based Planning: Perspectives from the United States, Australia and New Zealand. In Costa, H, Harper, T, & Gar-On Yeh, A (Eds.) Dialogues in Urban and Regional Planning 3. Routledge, Taylor & Francis Group, USA, New York, pp. 264-288. 1 Baker, Jason, Campbell, Duncan, & Bodnarova, Adriana (2003) Colour Image Segmentation Using Optimal Fuzzy Clustering. In Leung, Henry (Ed.) Proceedings of the 7th IASTED Int'l Conference on Artificial Intelligence and Soft Computing. IASTED - ACTA Press, United States of America, California, Anaheim, pp. 63-68. 1 Baker, Jason, Campbell, Duncan, Bodnarova, Adriana, & Chandran, Vinod (2003) Hue-Intensity Segmentation for Stereo Correspondence. In Hamza, M H (Ed.) Proceedings of the IASTED International conference on Robotic Applications. IASTED - ACTA Press, United States of America, California, Anaheim, pp. 195-200. Baker, Jason, Chandran, Vinod, & Sridharan, Subramanian (2004) Techniques for Improving Stereo Depth Maps of Faces. In CG & Leedham (Eds.) IEEE International Conference on Image Processing. IEEE - CD Rom, CD Rom, pp. 3279-3282. 4 3 Bakti, E & Trigunarsyah, B (2003) Constructability implementation at corporate level. In Hoedajanto, D (Ed.) Proceedings of the 9th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-9). Department of Civil Engineering, Institut Teknologi Bandung (ITB), Indonesia, pp. 88-93. 1,740 Bala Krishnan, Malarvili, Hassanpour, Hamid, Mesbah, Mostefa, & Boashash, Boualem (2005) A Histogram-Based Electroencephalogram Spike Detection. In Bouzerdoum, A (Ed.) Signal Processing and Its Applications, 2005 - Proceedings of the Eighth International Symposium on August 28-31, 2005. Institute of Electrical and Electronics Engineers Inc., Australia, New South Wales, Sydney, pp. 207-210. 8 6 Balan Nair, Madhavan & Cai, Jinhai (2007) A Fuzzy Logic Controller for Isolated Signalized Intersection with Traffic Abnormality Considered. In Ioannou, P (Ed.) Proceedings of the 2007 IEEE Intelligent Vehicles Symposium. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 1229-1233. 1,524 52 Baleshan, Balachandren & Mahendran, Mahen (2009) Fire tests of light gauge steel floor-ceiling systems. In Wiliem, A & Surawski, N (Eds.) Proceedings for the 3rd Smart Systems Postgraduate Student Conference. Queensland University of Technology, Faculty of Built Environment and Engineering, CD Rom, pp. 1-6. Baleshan, Balachandren & Mahendran, Mahen (2010) Full scale fire tests of a new light gauge steel floor-ceiling system. In Uy, B, Tao, Z, Zhu, X, Tan, E L, Mirza, O, & Mashiri, F (Eds.) Proceedings of the 4th International Conference on Steel and Composite Structures. Research Publishing, CD Rom, pp. 1-7. 356 Baleshan, Balachandren & Mahendran, Mahen (2010) Improvements to the fire performance of light gauge steel floor systems. In Yu, W W & LaBoube, R A (Eds.) Proceedings of the Twentieth International Specialty Conference on Cold-Formed Steel Structures. Missouri University of Science & Technology, United States, pp. 137-154. 174 4 Ball, David, Heath, Scott, Milford, Michael, Wyeth, Gordon, & Wiles, Janet (2010) A navigating rat animat. In Dorr, M, Stoy, K, Maurer, S, Merkle, D, Monard, P, Hanczyc, M M, et al. (Eds.) Proceedings of the 12th International Conference on the Synthesis and Simulation of Living Systems. The MIT Press, United States, pp. 804-811. 447 13 Ball, David, Heath, Scott, Wyeth, Gordon, & Wiles, Janet (2010) iRat: Intelligent Rat Animat Technology. In Wyeth, G & Upcroft, B (Eds.) Proceedings of the 2010 Australasian Conference on Robotics and Automation. Australian Robotics & Automation Association, Australia, pp. 1-9. 9 Ball, David & Wyeth, Gordon (2004) Modeling and exploiting behavior patterns in dynamic environments. In Harashima, F (Ed.) Proceedings of the 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems. Institute of Electrical and Electronics Engineers Inc., The United States of America, pp. 1371-1376. 1 Ball, David & Wyeth, Gordon (2008) Reading the play - adaption by prediction of agent motion. In Kim, J & Mahony, R (Eds.) Proceedings of the 2008 Australasian Conference on Robotics and Automation. Australian Robotics & Automation Association, Australia, pp. 1-10. 79 Ball, David, Wyeth, Gordon, & Nuske, Stephen (2004) A global vision system for a robot soccer team. In Barnes, N & Austin, D (Eds.) Proceedings of the 2004 Australasian Conference on Robotics and Automation. Australian Robotics and Automation Association, Australia, pp. 1-7. 166 Bandara, Arachchillage, Chan, Tommy, & Thambiratnam, David (2011) Frequency response function based structural damage detection using artificial neural networks. In Mendis, P A, Fernando, S, Jayasinghe, M T R, & Dissanayake, R (Eds.) Proceedings of the 2011 International Conference on Structural Engineering, Construction and Management. Faculty of Engineering, University of Peradeniya, CD Rom, pp. 1-12. 89 Bandara, Arachchillage, Chan, Tommy, & Thambiratnam, David (2011) Structural damage identification with noise polluted frequency response functions (FRFs). In Su, Z, Law, S S, Xia, Y, & Cheng, L (Eds.) Proceedings of the 14th Asia Pacific Vibration Conference - Dynamics for Sustainable Engineering - Volume 1. Department of Civil and Structural Engineering, The Hong Kong Polytechnic University, CD Rom, pp. 278-287. 363 Bandula Heva, Deeson & Mahendran, Mahen (2008) Local Buckling Tests of Cold-Formed Steel Compression Members at Elevated Temperatures. In Mahendran, M (Ed.) Proceedings of the Fifth International Conference on Thin-Walled Structures, Recent Innovations and Developments. Queensland University of Technology, Australia, pp. 745-752. 1,129 Banejad, Mahdi & Ledwich, Gerard (2003) Analysis of SVC Contribution to Damping of a Power System Including Induction Motor Effects. In Goel, L (Ed.) Proceedings of the 6th International Power Engineering Conference. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 105-110. Banejad, Mahdi & Ledwich, Gerard (2002) Correlation Based Mode Shape Determination of a Power System. In Principe, J & Bourlard, H (Eds.) Proceedings of the 2002 IEEE International Conference on Acoustics, Speech and Signal Processing. Institute of Electrical and Electronics Engineers, Piscataway, USA, pp. 3832-3835. 18 8 Banejad, Mahdi & Ledwich, Gerard (2002) Correlation-based Identification of the Effects of the Loads on Oscillatory Modes. In Zahedi, A (Ed.) Proceedings of Australasian Universities Power Engineering Conference 2002. Australasian Committee for Power Engineering, Melbourne, Victoria, pp. 1-6. Banejad, Mahdi & Ledwich, Gerard (2003) Investigation of Load Contribution in Damping of a Multi-Machine Power System Based on Sensitivity Analysis. In AUPEC 2003 Organising Committee (Ed.) Australian Universities Power Engineering Conference 2003 (AUPEC 2003). Uni of Canterbury, New Zealand, New Zealand, Christchurch, pp. 1-7. Banejad, Mahdi & Ledwich, Gerard (2003) On the Effect of SVC Control Design on Damping of Low Frequency Oscillations. In UPEC 2003 Organising Committee (Ed.) Proceedings of the 38th International Universities Power Engineering Conference. Aristotle University of Thessaloniki, Greece, Greece, pp. 1-4. Banejad, Mahdi & Ledwich, Gerard (2002) Quantification of Load Contribution in Damping of a Power System. In Bahmanpour, A A (Ed.) Proceedings of the 17th International Power Systems Conference. Matn Co, Tehran, Iran, pp. 103-110. Banejad, Mahdi, Ledwich, Gerard, & Kashem, Mohammad (2005) Operation of Power System Islands. In Negneviysky, M (Ed.) AUPEC 2005 CD Proceedings: Australian Universities Power Engineering Conference. University of Tasmania, CD Rom, pp. 1-7. Banejad, Mahdi, Zhang, Chuan, & Ledwich, Gerard (2003) Improving The SVC Contribution in Damping of Low Frequency Oscillation of a Power System. In D2003 Organising Committee (Ed.) 7th International Energy Transmission & Distribution Conference & Exhibition. Brainfood Design, Australia, Victoria, pp. 1-14. Banks, Jasmine (2008) An experiment in improving engagement with students in lectures and tutorials. In Mann, L, Howard, P, & Thompson, A (Eds.) Proceedings of the 2008 AaeE Conference, the 19th Annual Conference for the Australasian Association for Engineering Education: To Industry and Beyond. Faculty of Sciences, Engineering & Health, CQUniversity, Australia, pp. 1-6. 331 Banks, Jasmine, Bennamoun, Mohammed, Kubik, Kurt, & Corke, Peter (1999) A constraint to improve the reliability of stereo matching using the rank transform. In Proceedings of the International Conference on Acoustics Speech and Signal Processing (ICASSP '99). Institute of Electrical and Electronics Engineers Inc., Piscataway, NJ, USA, pp. 3321-3324. 105 7 1 Banks, Jasmine, Ericksson, G, Ivermee, S, Burrage, Kevin, Yellowlees, Peter, & Tichon, Jennifer (2004) A virtual environment to re-create the auditory and visual hallucinations of psychosis. In Spencer, S (Ed.) Proceedings of the 2004 ACM SIGGRAPH international conference on Virtual Reality Continuum and its Applications in Industry (VRCAI). Association for Computing Machinery Incorporated, United Statesof America, New York, pp. 45-48. 1 Banks, Jasmine, Pailthorpe, Bernard, Rothnagel, Rosalba, & Hankamer, Ben (2005) Automatic particle picking algorithms for high resolution single particle analysis. In Lovell, B & Maeder, A (Eds.) Proceedings of the Australian Pattern Recognition Society (APRS) Workshop on Digital Image Computing (WDIC) 2005. The University of Queensland, Australia, pp. 127-132. 367 Banks, Jasmine, Rothnagel, Rosalba, & Hankamer, Ben (2003) Automatic particle picking of biological molecules imaged by electron microscopy. In Bailey, D (Ed.) Proceedings of the Image and Vision Computing New Zealand Conference 2003. Massey University, Institute of Information Sciences and Technology, New Zealand, pp. 269-274. 58 Banks, Jasmine, Tichon, Jennifer, Ericksson, Geoffery, Ivermee, Sean, Burrage, Kevin, & Yellowlees, Peter (2003) A virtual environment to simulate the experience of psychosis. In Sun, C, Talbot, H, Ourselin, S, & Adriaansen, T (Eds.) Proceedings of the V11th Digital Image Computing: Techniques and Applications. CSIRO Publishing, Australia, Victoria, Melbourne, pp. 869-878. Barcelo, Jaume, Kuwahara, Masao, & Miska, Marc (2010) Traffic data collection and its standardization. In Barcelo, J & Kuwahara, M (Eds.) Traffic Data Collection and its Standardization: International Series in Operations Research and Management Science, Volume 144. Springer, Germany, pp. 1-10. 7 6 Barger, Peter & Sridharan, Sridha (2006) Application Specific Bounds on Detection Cost Using Game Theory. In Berkling, K & Torres Carrasquillo, P (Eds.) 2006 IEEE Odyssey - The Speaker and Language Recognition Workshop. Research Publishing Services, India, pp. 1-5. Barger, Peter & Sridharan, Sridha (2006) On the Performance and Use of Speaker Recognition Systems for Surveillance. In He, X, Hints, T, Piccardi, M, Pavlidis, I, & Regazzoni, C (Eds.) Proceedings of the IEEE International Conference on Video and Signal Based Surveillance 2006. IEEE Computer Society, CD Rom, pp. 1-6. 517 5 Barkat, Braham & Boashash, Boualem (2003) IF Estimation of FM Signals in Multiplicative Noise. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier Ltd, United Kingdom, Oxford, pp. 457-464. 1 Barkat, Braham, Boashash, Boualem, & Stankovic, Ljubisa (1999) Adaptive Window in the PWVD for the IF Estimation of FM Signals in Additive Gaussian Noise. In Proceedings of the 1999 IEEE International Conference on Acoustics Soeech and Signal Processing ICASP '99. Institute of Electrical and Electronics Engineers Inc., Piscataway NJ ( CD ROM), pp. 1317-1320. 18 Barkat, Braham & O'Shea, Peter (2003) Analysis of Polynomial FM Signals in Additive Noise. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier, Oxford, United Kingdom, pp. 447-456. Barker, Jill (2011) Judge George W Paul's Japanese house: a case study. In Moulis, A & Van Der Plaat, D (Eds.) Proceedings of the XXVIIIth International Conference of the Society of Architectural Historians, Australia and New Zealand. The Society of Architectural Historians, Australia and New Zealand (SAHANZ), Australia, pp. 1-15. 1,079 Barnes, Paul, Amarasinghe, Pradeep, Egodawatta, Prasanna, & Goonetilleke, Ashantha (2011) Assessing the resilience of potable water supplies in Southeast Queensland, Australia. In Haigh, R, Kulatunga, U, Pathirage, C, Amaratunga, D, & Keraminiyage, K (Eds.) Proceedings of the 2011 International Conference on Building Resilience: Interdisciplinary approaches to disaster risk reduction, and the development of sustainable communities and cities. University of Salford, United Kingdom, pp. 1-12. 292 Bartold, P. Mark & Xiao, Yin (2003) Use of a matrix scaffold for tissue engineering and bone regeneration. In Ellingsen, Jan Eirik & Lyngstaadas, S. Petter (Eds.) Bio-implant interface : improving biomaterials and tissue reactions. CRC Press, Boca Raton, Fla., pp. 243-254. 1 Basoenondo, Essy, Thambiratnam, David, & Purnomo, Heru (2002) Load Displacement Response of Non Standard Clay Brick Masonry Columns under Compressive Loading. In Thompson, G (Ed.) Proceedings of the 6th International Masonry Conference. British Masonry Society, Stoke-on-Trent, pp. 17-22. Baum, Scott, Yigitcanlar, Tan, Mahizhnan, Arun, & Andiappan, Narayanan (2008) E-Government in the Knowledge Society: The case of Singapore. In Baum, S, Yigitcanlar, T, & Velibeyoglu, K (Eds.) Creative Urban Regions: Harnessing Urban Technologies to Support Knowledge City Initiatives. Information Science Reference, United States, pp. 132-147. 3 4 Baum, Scott, Yigitcanlar, Tan, & O'Connor, Kevin (2008) Creative Industries and the Urban Hierarchy: The Position of Lower Tier Cities in the Knowledge Economy. In Baum, S, Yigitcanlar, T, & Velibeyoglu, K (Eds.) Knowledge-Based Urban Development: Planning and Applications in the Information Era. IGI Global, United States, pp. 42-57. 11 Bayissa, Wirtu, Dhanasekar, M, & Boyd, Paul (2008) Condition monitoring of rail joints using wavelet signal analysis. In Wang, H, Aravinthan, T, & Karunasena, W (Eds.) Futures in Mechanics of Structures and Materials: Proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials. CRC Press (Taylor and Francis Group), United Kingdom, pp. 795-800. Bayissa, Wirtu & Haritos, Nicholas (2005) Damage identification using uniform load surface method: comparison between flexibility and spectral density based approach. In Deeks, A (Ed.) Proceedings of the 1st International Conference on Structural Condition Assessment, Monitoring and Improvement. University of Western Australia, Australia, pp. 1-10. Bayissa, Wirtu & Haritos, Nicholas (2008) Damage identification using uniform random load surface spectral strain energy. In Topping, B H V & Papadrakakis M, M (Eds.) Proceedings of the 9th International Conference on Computational Structures Technology. Civil-Comp Press, United Kingdom, pp. 1-10. Bayissa, Wirtu & Haritos, Nicholas (2005) Structural damage assessment using the mean-square value of response power spectral density. In Dockrill, B (Ed.) Proceedings of the Australian Structural Engineering Conference 2005. Engineers Australia (EA), Australia, pp. 1-10. Bayissa, Wirtu & Haritos, Nicholas (2005) Structural damage identification using spectral moments of the vibration response signal. In Deeks, A (Ed.) Proceedings of the 1st International Conference on Structural Condition Assessment, Monitoring and Improvement. University of Western Australia, Australia, pp. 1-10. Bayissa, Wirtu & Haritos, Nicholas (2007) Structural damage severity estimation using two-stage damage identification approach. In Ren, W X & Hao, H (Eds.) Proceedings of the 2nd International Conference on Structural Condition Assessment, Monitoring and Improvement. University of Western Australia, School of Civil and Resource Engineering, Australia, pp. 1-10. Behrendorff, Carl & Bucolo, Savatore (2010) Participatory design for technological disruption within the agricultural sector. In Loi, D, Bodker, K, Robertson, T, & Bratteteig, T (Eds.) Proceedings of the 11th Conference on Participatory Design 2010. Association for Computing Machinery (ACM), United States of America, pp. 267-268. 242 Bell, John (2005) Is 'smart' always sustainable in building design and construction? In Yang, J, Brandon, P S, & Sidwell, A C (Eds.) Smart and Sustainable Built Environments. Blackwell, United Kingdom, pp. 176-186. 1 Bell, John (2003) Is Smart Always Sustainable in Building Design and Construction? In Yang, Jay (Ed.) Proceedings CD and Summary Book of The CIB 2003 International Conference on Smart and Sustainable Built Environment. Queensland University of Technology, Australia, Queensland, Brisbane, pp. 1-8. Bell, John & Fawcett, Anthea (2001) Designing Sustainability into Engineering Education and Practice - Education for a Sustainable Built Environment. In Towards Sustainable Development: Collaborative Approaches in Built Environment and Engineering Education. Queensland University of Technology, Brisbane, Queensland, pp. 82-92. Bell, John, Goh, Roland, Motta, Nunzio, Musumeci, Anthony, & Waclawik, Eric (2006) Molecular-Resolved Imaging of the Hierarchical Self-Assembly of a Conductive Polymer at Single-Walled Carbon Nanotube Interfaces. In Lu, G Q M & Jagadish, C (Eds.) Proceedings of the 2006 International Conference on Nanoscience and Nanotechnology. IEEE Publishing Company, United States of America, pp. 610-613. 550 Bell, John, Mabb, John, Garcia Hansen, Veronica, Bergman, Robert, & Morawska, Lidia (2003) Occupant Health and Productivity : An Australian Perspective. In Yang, Jay, Brandon, Peter S, & Sidwell, Anthony C (Eds.) Summary Book of The CIB 2003 International Conference on Smart and Sustainable Built Environment (SASBE 2003). Queensland University of Technology, Australia, Queensland, Brisbane, pp. 1-8. 464 Bell, John, Maine, Tony, Martin, Stewart, & Farrell, Troy (2008) Extraction of power from dye-sensitised solar cell arrays. In Sayigh, A (Ed.) Proceedings of the 10th World Renewable Energy Congress - WREC X. Elsevier, United Kingdom, pp. 1423-1430. 613 Bell, John & Miller, Wendy (2008) The use of advanced glazing in combating residential greenhouse emissions in subtropical and tropical regions in Australia. In Sayigh, A (Ed.) The Proceedings of the 10th World Renewable Energy Congress, 2008. Elsevier, United Kingdom, pp. 837-842. 1,150 Bell, John, Skryabin, Igor, & Matthews, Jeremy (2002) Smart Windows. In Schwartz, M (Ed.) Encyclopedia of Smart Materials. John Wiley & Sons, New York, USA, pp. 1134-1146. Bell, John, Smith, Geoff, & Lehman, Rex (2003) Advanced Roof Coatings : Materials and their Applications. In Yang, Jay (Ed.) Proceedings CD and Summary Book of The CIB 2003 International Conference on Smart and Sustainable Built Environment. Queensland University of Technology, Australia, Queensland, Brisbane, pp. 1-7. Bell, Stuart, Liu, Simin, Martens, Wayde, & Will, Geoff (2008) Inverse opal hematite films for photocatalytic hydrogen production. In Proceedings of the 17th World Hydrogen Energy Conference (WHEC 2008).Vol. 2. Curran Associates, Inc., United States of America, pp. 865-868. Bennamoun, Mohammed & Planitz, Judith (2002) Pressures of the Supervisory Process. In Grunwald, N & Pudlowski, Z J (Eds.) Proceedings of the 6th Baltic Region Seminar on Engineering Education. UNESCO International Centre for Engineering Education, Melbourne, Victoria, pp. 215-218. Bennamoun, Mohammed, Planitz, Judith, & Wissler, Rodney (2002) Expectations of Supervisors and Postgraduate Students in Engineering. In Shankar, K & Burrowes, G (Eds.) Proceedings of the 13th Annual Conference for Australasian Association for Engineering Education and 8th Australasian Women in Engineering Forum. Australasian Association for Engineering Education, Canberra, ACT, pp. 41-47. Berg, Klaus & Yarlagadda, Prasad (2005) Statistical Modelling of thin Epoxy Resin Layers Curing Using Microwave Energy. In Narayanan, S & Yarlagadda, P (Eds.) Proceedings of the 1st International Conference on Manufacturing and Management - 2004 (GCMM - 2004). Narosa Publishing House, India, pp. 220-226. 318 Bergmann, Neil & Dawood, Anwar (2001) Adaptive Interfacing with Reconfigurable Computers. In Proceedings of the 6th Australasian Computer Systems Architecture Conference. IEEE Computer Society Press, Los Alamitos, USA, pp. 11-18. 3 1 Bernard, Eddy, Bouquet, Fabrice, Charbonnier, Amandine, Legeard, Bruno, Peureux, Fabien, Utting, Mark, et al. (2006) Model-based testing from UML models. In Liskowsky, R & Hochberger, C (Eds.) Proceedings of the 1st Workshop of Model-based Testing 2006 in conjunction with the 36th Annual Conference of the Gesellschaft fur Informatik e.V. (GI), Informatik fur Menschen, INFORMATIK 2006. Gesellschaft fur Informatik, Germany, pp. 223-230. 10 Bernardi, Marco, Sgarlata, Anna, Motta, Nunzio, Fanfoni, Massimo, Del Moro, Dario, & Balzarotti, Adalberto (2008) Ordering of Ge quantum dots on silicon surfaces via bottom-up and top-down approaches. In Khan, A & Mulvaney, P (Eds.) Proceedings of the 2008 International Conference on Nanoscience and Nanotechnology. IEEE Xplore, United States, pp. 148-151. 1 Berrill, Trevor (2010) Exposure of pipe insulation to high temperatures from domestic pumped storage (split) solar water heating systems in Australia and New Zealand. In Dymond, M (Ed.) Proceedings of the 48th Australian Solar Energy Society Annual Conference. The Australian Solar Energy Society, http://www.auses.org.au/information-portal, pp. 1-12. Berrill, Trevor, Jolly, P.G., & Morrison, Graham (2010) Energy and cost savings from pipe insulation on domestic, pumped storage (split), solar water heating systems in Australia and New Zealand. In Dymond, M (Ed.) Proceedings of the 48th Australian Solar Energy Society Annual Conference. The Australian Solar Energy Society, http://www.auses.org.au/information-portal, pp. 1-10. Bert, Emmanuel, Chung, Edward, & Dumont, Andre-Gilles (2008) Approach for dynamic origin-destination matrices estimation in urban context. In Proceedings of the 7th European Congress on Intelligent Transport Systems and Services. ITS Congress Association, Switzerland, Geneva, pp. 1-14. Bert, Emmanuel, Chung, Edward, & Dumont, Andre-Gilles (2008) Urban dynamic origin-destination matrices estimation. In Ide, H, Mindlin, V, & Oliphant, N (Eds.) Proceedings of the 15th World Congress on Intelligent Transport Systems. ITS Congress Association, United States, pp. 1-15. 358 2 Betts, Martin (2004) Keynote Address - Visualisation & Information. In Hampson, K (Ed.) Clients Driving Innovation. CRC Construction Innovation, CD ROM, p. 1. Bevrani, Hassan, Ledwich, Gerard, & Ford, Jason (2009) On the use of df/dt in power system emergency control. In Juj, H (Ed.) Proceedings of the 2009 IEEE/PES Power Systems Conference and Exposition. IEEE Xplore, Online, pp. 1-6. 24 Bevrani, Kaveh & Chung, Edward (2011) Car following model improvement for traffic safety metrics reproduction. In Oxlad, L, Tisato, P, & Taylor, M (Eds.) Proceedings of the 34th Australasian Transport Research Forum. The Planning and Transport Research Centre (PATREC), http://www.patrec.org/atrf.aspx, pp. 1-14. 396 Bevrani, Kaveh, Rahman, Mamun, & Chung, Edward (2011) Queue protection parameters' fine-tuning for variable speed limits. In Oxlad, L, Tisato, P, & Taylor, M (Eds.) Proceedings of the 34th Australasian Transport Research Forum. The Planning and Transport Research Centre (PATREC), http://www.patrec.org/atrf.aspx, pp. 1-13. 145 Bewley, Alex, Shekhar, Rajiv, Leonard, Samuel, Upcroft, Ben, & Lever, Paul (2011) Real-time volume estimation of a dragline payload. In Bicchi, A (Ed.) Proceedings of the 2011 IEEE International Conference on Robotics and Automation. Institute of Electrical and Electronics Engineers Inc., IEEE Xplore, pp. 1571-1576. 680 13 15 Bewley, Alex, Upcroft, Ben, Lever, Paul, & Leonard, Samuel (2009) Automatic in-bucket volume estimation for dragline operations. In Lever, P & Knights, P (Eds.) Proceedings of the 2009 Australian Mining Technology Conference: Technology Solutions for Challenging Financial Times. CRCMining, Australia, pp. 153-167. Bhaskar, Ashish, Chung, Edward, de Mouzon, Olivier, & Dumont, Andre-Gilles (2008) Analytical modeling and sensitivity analysis for travel time estimation on signalized urban networks. In Smith, W & Powell, J L (Eds.) Proceedings of the Transportation Research Board 87th Annual Meeting. Transportation Research Board, United States, pp. 1-17. 1,437 Bhaskar, Ashish, Chung, Edward, de Mouzon, Olivier, & Dumont, Andre-Gilles (2007) Methodology for travel time estimation on a signalised arterial. In Mikulik, J (Ed.) Proceedings of the Young Researchers Seminar, 2007. European Conference of Transport Research Institutes, Czech Republic, pp. 1-11. Bhaskar, Ashish, Chung, Edward, de Mouzon, Olivier, & Dumont, Andre-Gilles (2007) Travel time estimation on a signalised urban networks using cumulative plots. In Proceedings of the 7th STRC Swiss Transport Research Conference. Swiss Transport Research Conference, Switzerland, pp. 1-11. Bhaskar, Ashish, Chung, Edward, & Dumont, Andre-Gilles (2011) Arterial travel time estimation: revisiting the classical procedure. In Oxlad, L, Tisato, P, & Taylor, M (Eds.) Proceedings of the 34th Australasian Transport Research Forum. The Planning and Transport Research Centre (PATREC), http://www.patrec.org/atrf.aspx, pp. 1-17. 120 Bhaskar, Ashish, Chung, Edward, & Dumont, Andre-Gilles (2008) Benefits and issues of urban network travel time prediction. In Proceedings of the 7th European Congress on Intelligent Transport Systems and Services. ITS Congress Association, Switzerland, pp. 1-10. Bhaskar, Ashish, Chung, Edward, & Dumont, Andre-Gilles (2009) Integrating cumulative plots and probe vehicle for travel time estimation on signalised urban network. In Proceedings of the 9th STRC Swiss Transport Research Conference. Swiss Transport Research Conference, Switzerland, pp. 1-24. Bhaskar, Ashish, Chung, Edward, & Dumont, Andre-Gilles (2006) Study of vehicle noise under different operating conditions. In Proceedings of the 6th STRC Swiss Transport Research Conference. Swiss Transport Research Conference, Switzerland, pp. 1-22. Bhaskar, Ashish, Chung, Edward, & Dumont, Andre-Gilles (2008) Travel time prediction on urban network by integrating stop-line detector data, signal controller data and probe information. In Proceedings of the 8th STRC Swiss Transport Research Conference. Swiss Transport Research Conference, Switzerland. Bhaskar, Ashish, Chung, Edward, & Kuwahara, Masao (2005) DRONE - a tool for urban traffic noise abatement policy evaluation. In Proceedings of the 5th STRC Swiss Transport Research Conference. Swiss Transport Research Conference, Switzerland, pp. 1-15. Bhaskar, Ashish, Chung, Edward, Kuwahara, Masao, de Mouzon, Olivier, & Dumont, Andre-Gilles (2007) Urban network travel time estimation from stop-line loop detector data and signal controller data. In Brebbia, C A (Ed.) Urban Transport XIII: Urban transport and the environment in the 21st Century. WIT Press, United Kingdom, pp. 147-156. 2 1 Bhaskar, Ashish, Chung, Edward, Kuwahara, Masao, & Oshino, Y. (2004) Areawide road traffic noise contour maps. In Candemir, Y (Ed.) Proceedings of the 10th World Conference on Transportation Research. World Conference on Transport Research Society, Turkey, pp. 1-18. Bhaskar, Ashish, Chung, Edward, Kuwahara, Masao, & Oshino, Y. (2004) Integration of a road traffic noise model (ASJ) and traffic simulation (AVENUE) for a built-up area. In Wadhwa, L C & Brebbia, C A (Eds.) Urban Transport X: Urban transport and the environment in the 21st century. WIT Press, United Kingdom, Hampshire, Southampton, pp. 783-794. 482 2 1 Bian, Jian, Gu, YuanTong, & Murray, Martin (2011) Numerical study of impact forces on railway sleepers under wheel flat. In Su, Z, Law, S S, Xia, Y, & Cheng, L (Eds.) Proceedings of the 14th Asia Pacific Vibration Conference - Dynamics for Sustainable Engineering - Volume 3. Department of Civil and Structural Engineering, The Hong Kong Polytechnic University, CD Rom, pp. 1280-1286. 560 Bianchi, Sebastiano, Comini, Elisabetta, Ferroni, Matteo, Sberveglieri, Giorgio, Pandolfi, Luca, Kaciulis, Saulius, et al. (2007) Preparation and characterization of tin oxide nanowires on SIC. In Puers, R & Delapierre, G (Eds.) Proceedings of the 14th International Conference on Micro-Sensors, Actuators and Microsystems - Transducers'07 and Eurosensors XXI. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 183-186. Biggs, Herbert, Dingsdag, Don, & Kirk, Phil (2009) Development of safety effectiveness indicators for use in the construction sector. In Cooke, T, Turner, M, & Lingard, H (Eds.) Proceedings of the CIB W099 Conference 2009 - Working Together: Planning, Designing and Building a Safe and Healthy Construction Industry. RMIT University, Australia, pp. 63-69. Birkeland, Janis (2008) Challenging 'best practice' subtropical design. In Kennedy, R (Ed.) Proceedings of the Subtropical Cities 2008 Conference - From fault-lines to straight-lines - subtropical urbanism in 20-20. Centre for Subtropical Design, Australia, Queensland, Brisbane, pp. 1-9. 745 Birkeland, Janis (2009) Communicating ecologically positive development. In Wood, P & Smitheram, J (Eds.) Proceedings of the 5th International Conference of the Association of Architecture Schools in Australasia (AASA). The Association of Architecture Schools in Australasia, New Zealand, pp. 1-10. 293 Birkeland, Janis (2009) Eco-retrofitting - from managerialism to design. In Fry, R & Cooperrider, D (Eds.) The Proceedings of Global Forum 2009 for Business as an Agent of World Benefit 'Manage by Designing in an Era of Massive Innovations'. Global Forum, http://worldbenefit.case.edu/global-forum/forum/presentation2.html, pp. 1-15. 3,263 Birkeland, Janis (2009) Eco-retrofitting with building integrated living systems. In van den Dobbelsteen, A (Ed.) Proceedings of the 3rd CIB International Conference on Smart and Sustainable Built Environment. Delft University of Technology, Netherlands, pp. 1-9. 1,127 Birkeland, Janis (2008) Space frame walls: facilitating positive development. In Newton, P, Paevere, P, Foliente, G, & Luetzkendorf, T (Eds.) Proceedings of the 2008 World Sustainable Building Conference - Volume 2. ASN Events, Australia, pp. 1-8. Birlasekaran, Sivaswamy (2003) Case studies on condition-based monitoring on transformers, generator, cables and GIS. In Proceedings of the COE Technology Week in-focus seminar on System Protection and Condition-Based Monitoring of Power Apparatus. Nanyang Technological University, -. Birlasekaran, Sivaswamy (2004) Machinery condition monitor using partial discharge measurement. In Proceedings of the 19th International Maintenance Conference. Unknown Publisher, -. Birtwhistle, David (1996) Co-operative Research in an Australian technological university. In Proceedings of the 3rd East-West Congress on Engineering Education. Monash University, Melbourne. Birtwhistle, David (2004) Electrical Conductance Time Constraints of Free-burning Arcs in Air and SF6. In Bordage, M, Gleizes, A, & Gonzales, J (Eds.) Proceedings of the 15th International Conference on Gas Discharges and their Applications. CPAT Laboratory, Paul Sabtier University, Toulouse, France, pp. 149-152. Birtwhistle, David (2002) Improved Techniques for Managing Life Cycle Costs of Electricity Distribution Assets. In Berry, P E (Ed.) Proceedings of the 2002 Electricity Engineers' Association of NZ Conference and Trade Exhibition. Electricity Engineers' Association of New Zealand Inc, Wellington, New Zealand, pp. 416-422. Birtwhistle, David (1996) Industry-Specific Postgraduate Education for Electrical Utility Engineers. In Proceedings of the 3rd East-West Congress on Engineering Education. Unesco Centre for Electrical Engineering, Monash, Monash University, Melbourne. Birtwhistle, David (2006) A Model for More Relevant and Useful Postgraduate Coursework Degrees. In Rowe, G & Reid, G (Eds.) Proceedings of the 17th Annual Conference of the Australasian Association for Engineering Education. Australasian Association for Engineering Education, New Zealand, Auckland, pp. 1-10. Birtwhistle, David (2003) Safety Issues with MV Oil-filled Switchgear. In D2003 Organising Committee (Ed.) 7th Int'l Energy Transmission & Distribution Conference & Exhibition. Brainfood Design, Australia, Victoria, pp. 1-13. Birtwhistle, David (2004) Sustainable Postgraduate Education for the Electricity Supply Industry. In Dong, Z (Ed.) Australian Universities Power Engineering Conference (AUPEC 2004). AUPEC, CD ROM, pp. 1-6. Birtwhistle, David, Gilbert, David, Cole, T, & Pearl, Patrick (1997) Application of RCM Methodology to Procurement of Equipment for Electricity Distribution Networks. In Proceedings of Engineering Asset Management for Utilities, Industry and Commerce. Era Technology Ltd, Surrey, United Kingdom. Birtwhistle, David, Lyall, James, Foottit, Elfrith, Wickramasuriya, Prasanna, Gilbert, R, Powell, L, et al. (2004) An Accelerated Wet Ageing Test on Medium Voltage XLPE Cables. In Dong, S (Ed.) Australasian Universities Power Engineering Conference (AUPEC 2004). AUPEC, CD ROM, pp. 1-5. Birtwhistle, David, McKinnon, Alistair, & Ryan, Y (1996) Development of Resource-based Learning for Competency-based Postgraduate Award Courses in Electricity Supply Engineering. In Proceedings of the 8th Annual Convention and Conference - Keeping Pace with Social and Technical Change. Australasian Assoc. for Engineering Education, Melbourne. Blackler, Alethea (2008) Applications of high and low fidelity prototypes in researching intuitive interaction. In Rust, C, Lever, J, Christer, K, & Turnbull, J (Eds.) Proceedings of DRS2008, Design Research Society Biennial Conference. Sheffield Hallam University, United Kingdom, pp. 1-17. Blackler, Alethea (2001) Teaching Industrial Design Criticism. In Proceedings of the ICSID Educational Seminar 2001 Seongnam. Seongnam City, Korea, Seoul, Korea, pp. 96-103. 2,070 Blackler, Alethea, Mahar, Doug, & Popovic, Vesna (2009) Intuitive interaction, prior experience and aging: An empirical study. In Blackwell, A F (Ed.) Proceedings of the 23rd British Computer Society Conference on Human Computer Interaction. British Computer Society, Online, pp. 1-4. 360 Blackler, Alethea, Mahar, Doug, & Popovic, Vesna (2010) Older adults, interface experience and cognitive decline. In Brereton, M (Ed.) Proceedings of the 22nd Conference of the Computer-Human Interaction Special Interest Group of Australia on Computer-Human Interaction. Association for Computing Machinery, Australia, pp. 172-175. 311 8 Blackler, Alethea, Popovic, Vesna, Lawry, Simon, Gudur, Raghavendra, Mahar, Doug, Kraal, Ben, et al. (2011) Researching intuitive interaction. In Chen, L L, Stappers, P J, & Roozenburg, N F M (Eds.) Diversity and unity: Proceedings of IASDR2011, the 4th World Conference on Design Research. Delft University of Technology, Netherlands, pp. 1-12. 246 Blackler, Alethea, Popovic, Vesna, & Mahar, Doug (2009) Concepts of intuitive interaction. In Wandke, H (Ed.) Workshop Proceedings der Tgung Mensch & Computer 2009. Logos Verlag Berlin, Germany, pp. 76-79. 216 Blackler, Alethea, Popovic, Vesna, & Mahar, Douglas (2003) Designing for Intuitive Use of Products. An Investigation. In Aoki, Hiroyuki (Ed.) Journal of the Asian Design International Conference Vol.1. 6th Asian Design International Conference, Japan, pp. 1-16. 1,202 Blackler, Alethea, Popovic, Vesna, & Mahar, Douglas (2007) Developing and Testing a Methodology for Designing for Intuitive Interaction. In Poggenpohl, S (Ed.) Proceedings of the International Association for Societies of Design Research 2007: Emerging Trends in Design Research. School of Design, Hong Kong Polytechnic University, CD Rom, pp. 1-24. Blackler, Alethea, Popovic, Vesna, & Mahar, Douglas (2005) Intuitive Interaction Applied to Interface Design. In Ho, M C (Ed.) New Design Paradigms: Proceedings of International Design Congress (IDC) 2005. International Design Congress, CD Rom, pp. 1-10. 1,449 Blackler, Alethea, Popovic, Vesna, & Mahar, Douglas (2005) Intuitive Interaction with Complex Artefacts. In Redmond, J, Durling, D, & de Bono, A (Eds.) Futureground: Volume 2: Proceedings. Monash University, Australia, pp. 1-14. 695 Blackler, Alethea, Popovic, Vesna, & Mahar, Douglas (2002) Intuitive Use of Products. In Durling, D & Shackleton, J (Eds.) Common Ground: Design Research Society International Conference 2002. Staffordshire University Press, Staffordshire, UK, pp. 2-14. 969 Blackler, Alethea, Popovic, Vesna, & Mahar, Douglas (2004) Studies of Intuitive Interaction Employing Observation and Concurrent Protocol. In Marjanovic, D (Ed.) Proceedings of the Design 2004 8th International Design Conference. Faculty of Mechanical Engineering and Naval Architecture, Zagreb, The Design Society, Glasgow, Zagreb, Croatia, pp. 135-143. 552 2 Blackler, Alethea, Popovic, Vesna, & Mahar, Douglas (2006) Towards a Design Methodology for Applying Intuitive Interaction. In Love, T, Rust, C, Friedman, K, & Corte-Real, E (Eds.) WonderGround: Proceedings of the 2006 Design Research Society International Conference. CEIADE - Centro Editorial do IADE, Portugal, pp. 1-17. Blackler, Alethea & Sim, Jean (2007) History for Designers: Engaging First Years Across Disciplines. In Thomas, J (Ed.) 10th Pacific Rim First Year in Higher Education Conference 2007 - Conference Proceedings. QUT Web Solutions, CD Rom, pp. 1-10. 330 Blake, Andrea & Cradduck, Lucy (2010) What is the impact of land tenure on the sustainability of retirement village communities in Australia? In Wang, Y, Yang, J, Shen, G, & Wong, J (Eds.) Proceedings of 2010 International Conference on Construction & Real Estate Management Volume 1. China Architecture and Building Press, China, pp. 424-429. 743 Blake, Andrea & Eves, Chris (2011) Real estate issues associated with the implementation of a carbon trading framework: A rural landholders perspective. In Wang, Y, Pang, Y, & Shen, G Q P (Eds.) Proceedings of 2011 International Conference on Construction & Real Estate Management Volume 2. China Architecture & Building Press, China, pp. 664-667. Blake, Andrea & Eves, Chris (2011) Valuers' Liability: the impact of torts reform in Queensland. In Weuffen, C (Ed.) Proceedings of the 17th Annual Pacific Rim Real Estate Society Conference. Pacific Rim Real Estate Society, http://www.prres.net/, pp. 1-12. 811 Blake, Andrea & Susilawati, Connie (2009) Property education: an evaluation of how well undergraduate property students are prepared for commencing their careers. In Levy, D (Ed.) Proceedings of the Pacific Rim Real Estate Society 15th Annual Conference 2009. PRRES, http://www.prres.net/, pp. 1-15. 345 Bleek, Morgan (2011) An assessment of timber dwellings typical of the Queenslander ERA, and constraints associated with their relocation, component and adaptive reuse when considering 'regeneration'. In Cowled, C J L (Ed.) Proceedings of the First International Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing. Queensland University of Technology, Australia, pp. 76-81. 532 Blom, Ricky, Yarlagadda, Prasad, & Mahalinga-Iyer, Ramasamy-Iyer (2005) Evaluation of Rapid Tooling for EDM Using Electroforming and Spray Metal Deposition Techniques. In Narayanan, S & Yarlagadda, P (Eds.) Proceedings of the 1st International Conference on Manufacturing and Management - 2004 (GCMM - 2004). Narosa Publishing House, India, pp. 490-495. 799 Boashash, Boualem (2003) Theory of Quadratic TFDs. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier Ltd., United Kingdom, Oxford, pp. 59-81. 13 Boashash, Boualem & Barkat, Braham (2001) Introduction to Time-Frequency Signal Analysis. In Wavelet Transforms And Time-frequency Signal Analysis. Birkhauser Boston, New York, USA, pp. 321-380. Boashash, Boualem, Belouchrani, Adel, Abed-Meraim, Karim, & Nguyen, Trung (2005) Time-Frequency Signal Processing for Wireless Communications. In Ibnakahla, M (Ed.) Signal Processing for Mobile Communications Handbook. CRC Press, United States of America, Massachusetts, Danvers, pp. 1-41. Boashash, Boualem & Mesbah, Mostefa (2003) Signal Enhancement by Time-Frequency Peak Filtering. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier, Oxford, United Kingdom, pp. 489-497. 90 Boashash, Boualem & Mesbah, Mostefa (2002) Time-frequency Methodology for Newborn Electroencephalographic Seizure Detection. In Papandreou-Suppappola, A (Ed.) Applications in Time-frequency Signal Processing. CRC Press LLC, Boca Raton, USA, pp. 339-369. 45 Boashash, Boualem, Mesbah, Mostefa, & Colditz, Paul (2001) Newborn EEG Seizure Pattern Characterisation Using Time-Frequency Analysis. In Proceedings of the 2001 IEEE International Conference on Acoustics, Speech, and Signal Processing. Institute of Electrical and Electronics Engineers, Piscataway, USA, pp. 1041-1044. 15 8 Boashash, Boualem, Mesbah, Mostefa, & Colitz, Paul (2003) Time-Frequency Detection of EEG Abnormalities. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier Ltd, United Kingdom, Oxford, pp. 663-670. 37 Boashash, Boualem & Putland, Gavin (2003) Discrete Time-Frequency Distributions and Computation of Discrete Quadratic TFDs. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier Ltd., United Kingdom, Oxford, pp. 29-57. Boashash, Boualem & Putland, Gavin (2003) Polynomial Wigner-Ville Distributions and Design of High-Resolution Quadratic TFDs with Separable Kernals. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier Ltd, United Kingdom, Oxford, pp. 3-27. Boashash, Boualem & Sucic, Victor (2003) High Performance Time-Frequency Distributions for Practical Applications. In Debnath, L (Ed.) Wavelets and Signal Processing. Birkhauser, United States of America, pp. 135-175. Boashash, Boualem & Sucic, Victor (2003) Resolution Performance Assessment for Quadratic TFDs. In Boashash, Boualem (Ed.) TIme-Frequency Signal Analysis and Processing: A Comprehensive Reference. Elsevier Ltd, United Kingdom, Oxford, pp. 305-314. Bodisco, Tim & Brown, Richard (2010) Statistical modeling to determine resonant frequency information present in combustion chamber pressure signals. In Carter, J & Mallinson, G (Eds.) Proceedings of the 17th Australasian Fluid Mechanics Conference. Australasian Fluid Mechanics Society, Online, pp. 1-4. 282 1 Bodisco, Timothy & Brown, Richard (2011) Ignition delay in an ethanol fumigated common rail diesel engine. In Masri, A, Kennedy, E, Moghtaderi, B, & Dlugogorski, B (Eds.) Proceedings of the Australian Combustion Symposium 2011. Combustion Institute, Australia and New Zealand Section, Australia, pp. 146-149. 140 Bodisco, Timothy, Reeves, Robert, Situ, Rong, & Brown, Richard (2009) Markov-chain monte carlo as a method of investigating time series data from an engineering perspective. In Wiliem, A & Surawski, N (Eds.) Proceedings for the 3rd Smart Systems Postgraduate Student Conference. Queensland University of Technology, Faculty of Built Environment and Engineering, CD Rom, pp. 36-40. Bodnarova, Adriana, Campbell, Duncan, Maeder, Anthony, & Whelan, Karen (2002) Introducing the Industry Cooperative Program in Electrical and Computer Engineering at QUT. In Shankar, K & Burrowes, G (Eds.) Proceedings of the 13th Annual Conference for Australasian Association for Engineering Education. Australasian Association for Engineering Education, Clayton, Vic, pp. 69-74. Boles, Wageeh (2001) The Learners and Their Learning Environment in an Engineering Curriculum. In Towards Sustainable Development: Collaborative Approaches in Built Environment and Engineering Education. Queensland University of Technology, Brisbane, Queensland, pp. 56-63. Boles, Wageeh (1997) A Security System Based on Human Iris Identification Using Wavelet Transform. In Proceedings of the 1st International Conference on Conventional and Knowledge-based Intelligent Systems. Institute of Electrical and Electronics Engineers Inc., Adelaide, South Australia. 32 23 Boles, Wageeh, Beck, Hilary, & Hargreaves, Douglas (2005) Deploying Bloom's Taxonomy in a Work Integrated Learning Environment. In Radcliffe, D & Humphries, J (Eds.) Proceedings of the 2005 ASEE/AaeE 4th Global Colloquium on Engineering Education. School of Engineering, The University of Queensland, Australia, Queensland, Brisbane, pp. 1-10. 1,082 Boles, Wageeh & Chu, S (1997) Personal Identification Using Images of the Human Palm. In Speech and Image Technologies for Computing and Telecommunications. QUT Publications, Brisbane, Queensland. 23 Boles, Wageeh & Emmett, David (2004) Web Interface in Support of Work Integrated Learning. In Snook, C & Thorpe, D (Eds.) Creating Flexible Learning Environments. Proceedings of the 15th Annual Conference for Australasian Association for Engineering Education and the 10th Australasian Women in Engineering Forum. University of Southern Queensland, Toowoomba, QLD, pp. 249-258. Boles, Wageeh, Geva, Shlomo, Reid, D, & McGarry, G (1997) Population Estimation of Prawn Larvae using Image Processing Techniques. In Proceedings of WOSPA '97. QUT Publications, Brisbane, Queensland. Boles, Wageeh, Hadgraft, Roger, & Howard, Prue (2008) Exploring synergies between learning and teaching in engineering: a case study approach. In Mann, L, Howard, P, & Thompson, A (Eds.) Proceedings of the 19th Annual Conference for the Australasian Association for Engineering Education: To Industry and Beyond. Faculty of Sciences, Engineering and Health, CQUniversity Australia, Australia, pp. 1-7. Boles, Wageeh, Howard, Prue, Hadgraft, Roger, & Jolly, Lesley (2009) Towards a better understanding of the student-lecturer-university interactions to enhance learning in engineering. In Cheung, J, Kestell, C, & Grainger, S (Eds.) Proceedings of the 20th Annual Conference for the Australasian Association for Engineering Education. The University of Adelaide, The School of Mechanical Engineering, Australia, pp. 630-636. Boles, Wageeh, Murray, Martin, Campbell, Duncan, & Mahalinga-Iyer, Ramasamy-Iyer (2006) Engineering the Learning Experience: Influences and Options. In Rowe, G & Reid, G (Eds.) Proceedings of the 17th Annual Conference of the Australasian Association for Engineering Education. Auckland University of Technology, School of Engineering, New Zealand, pp. 1-10. 347 Boles, Wageeh & P'ng, S (1997) A Method for Recognising Household Object Contours Using Wavelet Transform. In Speech and Image Technologies for Computing and Telecommunications. QUT Publications, Brisbane, Queensland. Bolooki, Faisal & Bridge, Adrian (2007) The Guide to the Project Management Body of Knowledge (PMBOK Guide): Applicability and Contribution to Project Success in Australia. In McCaffrey, N (Ed.) Proceedings of 4th Annual Project Management Australia Conference. PM Global, CD Rom, pp. 1-13. 830 Boril, Hynek, Omid Sadjadi, Seyed, Kleinschmidt, Tristan, & Hansen, John (2010) Analysis and detection of cognitive load and frustration in drivers' speech. In Hirose, K, Nakamura, S, & Kobayashi, T (Eds.) Proceedings of the 11th Annual Conference of the International Speech Communication Association. International Speech Communication Association, CD Rom, pp. 502-505. 569 55 31 Boulton-Lewis, Gillian, Buys, Laurie, Edwards, Sylvia, & Partridge, Helen (2009) Ageing, learning, technology and health management. In Klinger, K (Ed.) Handbook of Research on Information Technology Management and Clinical Data Administration in Healthcare. IGI Global, United States, pp. 674-688. Boulton-Lewis, Gillian, Buys, Laurie, & Tedman-Jones, Jan (2007) Conceptions of Aging and Engagement in Learning for a sample of Lifelong Intellectually Disabled Adults. In Bissland, V & McKenzie, B (Eds.) Proceedings of the International Conference on Learning in Later Life. University of Strathclyde, United Kingdom, Scotland, Strathclyde, pp. 21-27. 621 Bouquet, Fabrice, Jaffuel, Eddie, Legeard, Bruno, Peureux, Fabien, & Utting, Mark (2005) Requirements traceability in automated test generation: application to smart card software validation. In Jain, A, Dalal, S R, & Poore, J (Eds.) Proceedings of the 1st International Workshop on Advances in Model-Based Testing. Association for Computing Machinery, United States of America, pp. 1-7. 15 Boyd, Cameron, Enderle, Werner, & Wilson, Shaun (2003) Applying Concurrent Engineering to the Joint Australian Engineering Satellite (JAESAT). In SETE 2003 Organising Committee (Ed.) Systems Engineering/Test Evaluation Conference 2003 (SETE 2003). University of South Australia, Australia, South Australia, Adelaide, pp. 1-20. Boyd, Terence (2005) Assessing the Triple Bottom Line Impact on Commercial Buildings. In Sidwell, A (Ed.) QUT Research Week 2005: Conference Proceedings. Queensland University of Technology, Australia, Queensland, Brisbane, pp. 1-13. 5 Boyd, Terence (2006) Can We Assess the Worth of Environmental and Social Characteristics in Investment Property? In DeFrancesco, A (Ed.) Proceedings of the 12th Pacific Rim Real Estate Society Conference 2006. Pacific Rim Real Estate Society (PRRES), http://www.prres.net/, pp. 1-15. Boyd, Terence (2003) Property Cash Flow Studies: Focusing on Model Consistency and Data Accuracy. In Boyd, Terry (Ed.) Pacific Rim Real Estate Society - 9th Annual Conference. PRRES, http://www.business.unisa.edu.au/prres/Proceedings/2003proceedings.htm, pp. 1-21. 615 Boyd, Terence & Kimmet, Phillip (2004) Innovative Benchmarks for Built Asset Performance - The Triple Bottom Line Approach. In Williams, K (Ed.) CRC Construction Innovation Conference. Clients Driving Innovation International Conference 2004. CRC Australia, Australia, pp. 1-18. Boyle, Justin, Maeder, Anthony, & Boles, Wageeh (2003) Can Environmental Knowledge Improve Perception with Electronic Visual Prostheses. In Allen, Barry & Lovell, Nigel (Eds.) Proceedings of the World Congress on Medical Physics and Biomedical Engineering. IFMBE, Australia, South Australia, Adelaide, pp. 1-4. Boyle, Justin, Maeder, Anthony, & Boles, Wageeh (2001) Challenges in Digital Imaging for Artificial Human Vision. In Proceedings of SPIE Volume 4299. SPIE - The International Society for Optical Eng, Washington, USA, pp. 533-543. 18 14 Boyle, Justin, Maeder, Anthony, & Boles, Wageeh (2003) Inherent Visual Information for Low Quality Image Presentation. In Lovell, Brian C (Ed.) Workshop Proceedings of the 2003 APRS Workshop on Digital Image Computing. University of Queensland, Australia, Queensland, Brisbane, pp. 51-56. Boyle, Justin, Maeder, Anthony, & Boles, Wageeh (2003) Scene Specific Imaging for Bionic Vision Implants. In Neri, A, Babic, H, & Loncaric, S (Eds.) 3rd International Symposium on Image and Signal Processing and Analysis. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 1-5. 11 4 Boyle, Justin, Maeder, Anthony, & Boles, Wageeh (2001) Static Image Simulation of Electronic Visual Prostheses. In Proceedings of the 7th Australian and New Zealand Intelligent Information Systems Conference. University of Western Australia, Perth, WA, pp. 85-88. 10 9 Boyle, Justin, Maeder, Anthony, & Boles, Wageeh (2002) Visual Perception of Low Quality Images. In Lee, S, Yao, X, Wang, L, Rajapakse, J, & Fukushima, K (Eds.) Proceedings of the 9th International Conference on Neural Information Processing. Institute of Electrical and Electronics Engineers, Piscataway, USA, pp. 153-157. 8 Bradhurst, Christopher, Boles, Wageeh, & Xiao, Yin (2009) Segmentation of bone marrow stromal cells in phase contrast microscopy images. In Irie, K & Pairman, D (Eds.) Proceedings of the 2008 23rd International Conference Image and Vision Computing New Zealand. Institute of Electrical and Electronics Engineers Inc., Online, pp. 1-6. 990 27 Breakenridge, Calvin (2003) Nonstationary Signal Classification Using Time-Frequency Optimization. In SuviSoft (Ed.) Proceedings of the 10th IEEE International Conference on Electronics, Circuits and Systems. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 132-135. 5 Breakenridge, Calvin (2003) Vibration Monitoring Classification Using Optimized Time-Frequency Representations. In Mathew, Joseph (Ed.) 10th Asia-Pacific Vibration Conference. Queensland University of Technology, Australia, Queensland, Brisbane, pp. 19-24. Breakenridge, Calvin & Mesbah, Mostefa (2003) Minimum Classification Error Using Time-Frequency Analysis. In Gershman, Alex & Serpanos, Dimitrios (Eds.) 3rd International Symposium on Signal Processing and Information Technology. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 1-4. 1 1 Brereton, Margot (2009) Designing from somewhere - a located, relational and transformative view of design. In Binder, T, Lowgren, J, & Malmborg, L (Eds.) (Re)searching the Digital Bauhaus. Springer, United Kingdom, pp. 100-119. 1 Brereton, Margot (2004) Distributed cognition in engineering design: negotiating between abstract and material representations. In Porter, W L & Goldschmidt, G (Eds.) Design Representation. Springer, United States of America, pp. 83-103. 33 Brereton, Margot, Bidwell, Nicola, Donovan, Jared, Campbell, Brett, & Buur, Jacob (2003) Work at hand: an exploration of gesture in the context of work and everyday life to inform the design of gestural input devices. In Biddle, R & Thomas, B (Eds.) User Interfaces 2003: Proceedings of the Fourth Australasian User Interface Conference (AUIC2003) [Conferences in Research and Practice in Information Technology, Volume 18]. Australian Computer Society, Australia, New South Wales, Darlinghurst, pp. 1-10. Brereton, Margot, Donovan, Jared, & Viller, Stephen (2003) Talking about watching: using the video card game and wiki-web technology to engage IT students in developing observational skills. In Lister, R & Greening, T (Eds.) Proceedings of the Fifth Australasian Conference on Computing Education, 2003. Australian Computer Society, Australia, New South Wales, Darlinghurst, pp. 197-205. Brereton, Margot & Ghelawat, Sunil (2010) Designing for participation in local social ridesharing networks - grass roots prototyping of IT systems. In Daria, L, Bodker, K, Robertson, T, & Brattelteig, T (Eds.) Proceedings of the 11th Conference on Participatory Design 2010. The Association for Computing Machinery, United States, pp. 199-202. 225 16 Brereton, Margot & Ghelawat, Sunil (2010) Designing participation: Reconsidering agile ridesharing with evolutionary distributed design thinking. In Dong, A, Dorst, K, Paton, B, Stewart, S, & Staudinger, I (Eds.) Proceedings of the 8th Design Thinking Research Symposium. DAB Documents, Australia, pp. 71-87. 206 Brereton, Margot, Mirisaee, Seyed, Ghelawat, Sunil, & Roe, Paul (2011) Reframing the design of context-aware computing. In Blythe, M & Wright, P (Eds.) Proceedings of the 25th BCS Conference on Human-Computer Interaction. Electronic Workshops in Computing (eWiC), http://ewic.bcs.org/, pp. 52-57. 209 Brereton, Margot, Roe, Paul, Foth, Marcus, Bunker, Jonathan, & Buys, Laurie (2009) Designing participation in agile ridesharing with mobile social software. In Paay, J, Viller, S, & Kjeldskov, J (Eds.) OZCHI '09 - Proceedings of the 21st Annual Conference of the Australian Computer-Human Interaction Special Interest Group: Design: Open 24/7. Computer-Human Interaction Special Interest Group (CHISIG), Online, pp. 257-260. 1,041 34 Brereton, Margot, Roe, Paul, & Lee Hong, Anita (2011) A cross-cultural approach towards designing digital noticeboards with a remote Aboriginal community. In Bidwell, N J & Winschiers-Theophilus, H (Eds.) Proceedings of the Indigenous Knowledge Technology Conference, IKTC2011: Embracing Indigenous Knowledge Systems in a New Technology Design Paradigm. Polytechnic of Namibia, Namibia, pp. 137-139. Brereton, Margot, Roe, Paul, & Lee Hong, Anita (2011) Towards designing digital noticeboards with a remote indigenous community. In Jorge, J, Nunes, N, Graham, N, Campos, P, & Palanque, P (Eds.) Proceedings of the Interact 2011 Workshop on Indigenous HCI. Interact 2011 Workshop on Indigenous HCI, Portugal, pp. 1-4. Bridge, Adrian (2002) Boundary Decisions in Relation to Mechanical Building Services Maintenance. In Morledge, R (Ed.) Proceedings of the RICS Foundation Construction and Building Research Conference - COBRA 2002. RICS Foundation, London, UK, pp. 332-344. Bridge, Adrian (2009) Competition in major infrastructure: deploying an integrative framework of internalisation and externalisation. In Zuo, J, Cole, J, Pullen, S, Coggins, J, Zillante, G, & Mehrtens, V (Eds.) 34th Australasian Universities Building Educators Conference (AUBEA 2009). School of Natural Built Environments University of South Australia, Australia, pp. 1-16. Bridge, Adrian (2001) An Examination of the Governance of Mechanical and Electrical Building Services Maintenance: Towards Improved Decision Making. In Proceedings of the RICS Foundation Construction and Building Research Conference: Volume 2. RICS Foundation, London, United Kingdom, pp. 650-659. Bridge, Adrian (2007) Exchange Relationships in Building Services Maintenance Activity: A Test of Transaction Cost Economics and the Resource Dependency View. In Hughs, W (Ed.) Proceedings of CME 25 Conference Construction Management and Economics Past, Present and Future. Taylor and Francis, CD Rom, pp. 1-13. Bridge, Adrian (2005) A Make-or-Buy Decision by Mechanical Services Contractors: A Further Test of an Integrative Framework of Vertical Integration. In Sidwell, A C (Ed.) Proceedings of QUT Research Week 2005. Queensland University of Technology, CD Rom, pp. 1-12. 144 Bridge, Adrian (2004) The Make-Or-Buy Decision in Relation to Mechanical Building Services Maintenance: A Test of an Integrated Framework of Vertical Integration. In Bell, M & Ellis, R (Eds.) Proceedings of RICS COBRA 2004. The International Construction Conference. Responding to Change. The RICS Foundation, London, United Kingdom, pp. 1-12. 144 Bridge, Adrian (2008) Market structures in air conditioning maintenance activity. In Dainty, A (Ed.) Proceedings of the 24th Annual ARCOM Conference. ARCOM, Association of Researchers in Construction Management, United Kingdom, pp. 579-586. 27 Bridge, Adrian (1997) The Role of Competency Based Training within Capability Learning. In Proceedings of the 1997 3rd International Electronic Forum on Research and Education for Construction. AUBEA, Australia. Bridge, Adrian, Tiong, Robert, & Wang, ShouQing (2010) Value for money: Procuring infrastructure. In Yigitcanlar, T (Ed.) Sustainable Urban and Regional Infrastructure Development: Technologies, Applications and Management. Information Science Reference, United States, pp. 295-309. Brisbin, Chris (2003) Perspectival generation in/within the Sala della Pace: broadening the viewfield of spatialised images. In Stead, N & Gusheh, M (Eds.) PROGRESS : proceedings of the 20th Annual Conference of the Society of Architectural Historians. The Society of Architectural Historians, Australia and New Zealand, Australia, New South Wales, Sydney, pp. 32-37. 345 Brisbin, Christopher (2007) Cracks in the Glass: The Emergence of a New Image Typology from the Spatio-temporal Schisms of the 'Filmic' Virtual Reality Panorama. In Loo, S & Bartsch, K (Eds.) Proceedings of 24th International Conference of the Society of Architectural Historians, Australia and New Zealand. Society of Architectural Historians, Australian and New Zealand, CD ROM, pp. 1-13. 353 Brisbin, Christopher (2007) Spatial Transfiguration: Anamorphic Mixed-Reality in the Virtual Reality Panorama. In Loo, S & Bartsch, K (Eds.) Proceedings of 24th International Conference of the Society of Architectural Historians, Australia and New Zealand. Society of Architectural Historians, Australian and New Zealand, Australia, South Australia, Adelaide, pp. 1-13. 708 Brisbin, Christopher A. (2011) Optical affects: Fenestrations and optical fascinations in the re-embodied architecture of South-East Queensland. In McNamara, Andrew E. (Ed.) Sweat: The Subtropical Imaginary. Institute of Modern Art, Fortitude Valley, Brisbane, Qld. Broderick, David, Dawood, Anwar, Bergmann, Neil, & Wark, Melanie (2001) Error Detection for Adaptive Computing Architectures in Spacecraft Applications. In Proceedings of the 6th Australasian Computer Systems Architecture Conference. IEEE Computer Society Press, Los Alamitos, USA, pp. 19-26. 8 2 Brodie, Paul, Campbell, Duncan, Yarlagadda, Prasad, & Lees, Michael (2009) A methodology for modelling interdependencies between utilities and processes in a modern brewery. In Wiliem, A & Surawski, N (Eds.) Proceedings for the 3rd Smart Systems Postgraduate Student Conference. Queensland University of Technology, Faculty of Built Environment and Engineering, CD Rom, pp. 52-59. Brooks, Alex, Makarenko, Alexei, & Upcroft, Ben (2006) Gaussian process models for sensor-centric robot localisation. In Papanikolopoulos, N (Ed.) Proceedings of the 2006 IEEE International Conference on Robotics and Automation, ICRA 2006. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 56-61. 11 5 Brooks, Alex, Makarenko, Alexei, Upcroft, Ben, & Durrant-Whyte, Hugh (2008) Learning informative features for indoor traversability. In Rus, D, Kumar, V, & Khatib, O (Eds.) Experimental Robotics. Springer, Germany, pp. 309-319. 1 1 Brott, Simone (2011) Violent urbanism is us. In Moulis, A & Van Der Plaat, D (Eds.) AUDIENCE: Proceedings of the XXVIIIth International Conference of the Society of Architectural Historians, Australia and New Zealand. Society of Architectural Historians, Australia and New Zealand, Australia, pp. 1-20. 473 Brouwers, Niels, Corke, Peter, & Langendoen, Koen (2008) Darjeeling, a Java compatible virtual machine for microcontrollers. In Douglis, F (Ed.) Proceedings of the ACM/IFIP/USENIX Middleware '08 Conference Companion. ACM Press, United States, pp. 18-23. 25 Brouwers, Niels, Langendoen, Koen, & Corke, Peter (2009) Darjeeling, a feature-rich VM for the resource poor. In Liu, J & Welsh, M (Eds.) Proceedings of the 7th ACM Conference on Embedded Networked Sensor Systems. ACM Press, United States, pp. 169-182. 83 43 Brown, Cameron, Oloyede, Adekunle, Moody, Hayley, & Crawford, Ross (2005) New Directions for the Characterisation of Cartilage Health in Vivo. In Hanza, M (Ed.) Proceedings of the Third IASTED International Conference on Biomechanics. ACTA Press, United States of America, pp. 307-311. 208 Brown, Kerry & Hampson, Keith (2006) Moving ideas into practice. In Brown, K, Hampson, K, & Brandon, P (Eds.) Clients Driving Construction Innovation: Moving Ideas into Practice. Icon Net Pty Ltd., Australia, Queensland, Brisbane, pp. 2-4. Brown, Kerry, Pillay, Janet, & Hampson, Keith (2008) Benefiting from innovation. In Brown, K, Pillay, J, Hampson, K, & Brandon, P (Eds.) Clients Driving Construction Innovation 'Benefiting from Innovation'. CRC for Construction Innovation, Australia, Queensland, Brisbane, pp. 2-4. Brown, Richard (2001) Use of Peer Marking to Enhance Student Learning in Thermodynamics. In Proceedings of the 12th Australasian Conference on Engineering. Queensland University of Technology, Brisbane, Queensland. Brown, Richard, Cheung, Leonard, Ito, Yasumasa, Nagata, Kouji, & Komori, Satoru (2002) Experimental Study of the Propellor Wake of an Outboard Motor. In Proceedings of the 2002 Meeting of the Japan Society of Fluid Mechanics. Japan Society of Fluid Mechanics, Japan, pp. 480-481. Brown, Richard, Ferris, John, Warturton, Kevin, & Chanson, Hubert (2004) Hydrodynamic, water quality and ecological study of eprapah creek estuarine zone: a multi-disciplinary, cross institutional approach. In McGrath, T (Ed.) 8th National Conference on Hydraulics in Water Engineering. CD ROM, CD ROM, pp. 1-8. 400 Brown, Ross, Pham, Binh, Aidman, Eugene, & Maeder, Anthony (2000) Efficient Image Rendering Using a Fuzzy Logic Model of Visual Attention. In Proceedings of the 2000 International Conference on Advances in Intelligent Systems: Theory and Applications. IOS Press, Amsterdam, The Netherlands, pp. 314-319. 551 2 Brown, Ross, Pham, Binh, & Maeder, Anthony (2001) A Fuzzy Logic Model of Visual Importance for Efficient Image Synthesis. In 2001 IEEE International Fuzzy Systems Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., Piscataway, USA, pp. 1400-1403. 496 3 Brown, Ross, Pham, Binh, & Maeder, Anthony (2003) Visual Importance-Biased Image Synthesis Animation. In Spencer, Stephen (Ed.) Proceedings - 1st International Conference on Computer Graphics and Interactive Techniques in Australasia and South East Asia. ACM, Inc, United States of America, New York, pp. 63-70. 316 6 Brownlee, Joanne, Berthelsen, Donna, & Boulton-Lewis, Gillian (2010) Towards self-authorship in child care students: Implications for working with children and their families. In Creamer, E G, Meszaros, P S, & Baxter Magolda, M B (Eds.) Development and Assessment of Self-Authorship: Exploring the Concept Across Cultures. Stylus Publishing, LLC, United States, pp. 101-115. 366 Brownlee, Joanne, Edwards, Angela, Berthelsen, Donna, & Boulton-Lewis, Gillian (2011) Self-authorship in child care student teachers: Is there a link between beliefs and practice? In Schraw, G, Brownlee J, J, & Berthelsen, D (Eds.) Personal Epistemology and Teacher Education. Routledge, United States, pp. 68-83. 8 Bruggemann, Troy & Enderle, Werner (2005) Time synchronization capability of SPARx - the Queensland University of Technology (QUT) GPS receivers. In Rizos, C (Ed.) Proceedings of the 2004 International Symposium on GPS/GNSS. www.gnss2004.org, CD Rom, pp. 1-6. 493 Bruggemann, Troy & Ford, Jason (2011) Compensation of unmodeled aircraft dynamics in airborne inspection of linear infrastructure assets. In Mareels, I (Ed.) Proceedings of the 1st Australian Control Conference 2011. IEEE / Engineers Australia, Australia, pp. 148-154. 351 1 Bruggemann, Troy & Ford, Jason (2011) Guidance of aircraft in periodic inspection tasks. In Mareels, I (Ed.) Proceedings of the 1st Australian Control Conference 2011. IEEE / Engineers Australia, Australia, pp. 445-451. 259 1 Bruggemann, Troy, Greer, Duncan, & Walker, Rodney (2006) Chip Scale Atomic Clocks: Benefits to Airborne GNSS Navigation Performance. In Dempster, A (Ed.) Proceedings of the International Global Navigation Satellite Systems Society IGNSS Symposium 2006. Menay Pty Ltd, Australia, pp. 1-16. 1,141 Bruggemann, Troy, Greer, Duncan, & Walker, Rodney (2005) GARDSim - A GPS Receiver Simulation Environment for Integrated Navigation System Development and Analysis. In Goh, R & Ward, N R (Eds.) Smart Systems 2005. Postgraduate Research Conference. 15 Dec 2005, QUT Gardens Point Campus, Brisbane, Qld. Australia. QUT, Australia, Queensland, Brisbane, pp. 122-132. 1,028 Bruggemann, Troy, Greer, Duncan, & Walker, Rodney (2007) GPS Integrity Monitoring with an Aerodynamic Model and Low Quality INS. In Dempster, A (Ed.) International Global Navigation Satellite Systems Society - IGNSS Symposium 2007. Menay Pty Ltd, CD Rom, pp. 1-13. 690 Bruggemann, Troy, Greer, Duncan, & Walker, Rodney (2005) High integrity airborne navigation with the ground based regional augmentation system. In Australian Research Centre for Aerospace Automation (Ed.) Proceedings of the Australian Research Centre for Aerospace Automation - The Future of UAVs - Challenges and Applications in the Asia Pacific Region. Australian Research Centre for Aerospace Automation, Australia, Queensland, Brisbane, p. 1. 221 Brummer, Niko & Pelecanos, Jason (2001) Unsupervised Evaluation of Speaker Verification Systems. In Proceedings of 2001 A Speaker Odyssey: The Speaker Recognition Workshop. European Speech Communication Association, Crete, Greece, pp. 243-248. Brunello, Lara, Bunker, Jonathan, & Ferreira, Luis (2008) Continuous Railway Systems: An Innovative Approach to Improve High Speed Rail Sustainability. In Karlaftis, M G (Ed.) Proceedings of the 10th International Conference on Applications of Advanced Technologies in Transportation. AATT, Greece, pp. 1-13. 145 Brunello, Lara, Bunker, Jonathan, & Ferreira, Luis (2006) Investigation to enhance sustainable improvements in high speed rail transport. In Taplin, J (Ed.) Proceedings of the 28th Conference of the Australian Institutes of Transport Research. Monash University, Australia, pp. 1-14. 811 Brunello, Lara, Bunker, Jonathan, Ferreira, Luis, & Ferrara, Renzo (2008) Enhancing sustainable road and rail interaction. In Zavrian, V (Ed.) Proceedings of the Transport Research Arena Europe 2008 Conference. ZAG, DRC, Road and Transportation Research Association of Slovenia, Slovenia, pp. 1-8. Bryant, Lyndall (2010) Constraints to cost effective land supply. In Levy, D (Ed.) Proceedings of the PRRES Conference - 2010, The 16th Annual Conference of the Pacific Rim Real Estate Society. PRRES, http://www.prres.net/index.htm?http://www.prres.net/Proceedings/2010proceedings.asp, pp. 1-19. 604 Bryant, Lyndall & Eves, Chris (2011) Assessing the awareness and importance of housing sustainability in Queensland. In Cowled, C J L (Ed.) Proceedings of the First International Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing. Queensland University of Technology, Australia, pp. 66-71. 635 Bryant, Lyndall & Eves, Chris (2011) The impact of infrastructure charges on new housing cost: An international comparison. In Wang, Y, Pang, Y, & Shen, G Q P (Eds.) Proceedings of 2011 International Conference on Construction & Real Estate Management Volume 2. China Architecture & Building Press, China, pp. 894-899. 499 1 Bryant, Lyndall & Eves, Chris (2011) Sustainability and mandatory disclosure in Queensland: An assessment of the impact on home buyer patterns. In Weuffen, C (Ed.) Proceedings of the 17th Annual Pacific Rim Real Estate Society Conference. Pacific Rim Real Estate Society, http://www.prres.net/, pp. 1-22. 355 Bucolo, Salvatore (2009) Celebrating a common and uncommon ground - A case study. In Garcia, D, Ferran, B, & Brickwood, C (Eds.) (Un)common Ground: Creative Encounters across Sectors and Disciplines. BIS Publishers, The Netherlands, pp. 44-49. Bucolo, Salvatore (2004) Understanding Cross Cultural Differences During Interaction Within Immersive Virtual Environments. In Spencer, S N (Ed.) Proceedings VRCAI 2004. ACM SIGGRAPH International Conference on Virtual Reality Continuum and its Applications in Industry. Association for Computing Machinery (ACM), New York, United States, pp. 221-224. 2 Bucolo, Salvatore, Ginn, Simon, & Gilbert, Dale (2003) Using Virtual Reality Models to Better Communicate How Transport Infrastructure can Interface and Interact with the Built Urban Environment. In Green, F K (Ed.) Proceedings of the 21st ARRB and 11th REAAA Transport Conference (2003). ARRB Transport Research Ltd., Australia, Victoria, pp. 1-8. 2 Bucolo, Salvatore, Ginn, Simon, Gilbert, Dale, & Hayes, John (2003) Transit Oriented Sustainable Urban Developments - Enhancing Community Consultation through Web Based Virtual Environments. In Spencer, Stephen N (Ed.) Proceedings of the 1st Int'l Conference on Computer Graphics and Interactive Techniques in Australasia and South East Asia. Assoc. for Computing Machinery Inc., United States of America, New York, pp. 271-272. Bucolo, Sam & Chan, Nathan (2001) Emerging Computer Based Conceptual Design Tools: Implications for Design Education. In Proceedings of the ICSID Educational Seminar 2001 Seongnam. Seongnam City, Korea, Seoul, Korea, pp. 210-217. Bucolo, Sam, Goss, Halima, & Hayes, John (2001) Developing a Web-Based Methodology to Teach a Web-Based Technology - The e-Journal Approach. In Short Paper Proceedings of the 18th Annual Conference of the Australasian Society for Computers in Learning in Tertiary Education. Biomedical Multimedia Unit, University of Melb, Melbourne, Victoria, pp. 17-20. Bucolo, Sam, Impey, Philip, & Hayes, John (2001) Client Expectations of Virtual Environments for Urban Design Development. In Proceedings of the 5th International Conference on Information Visualisation. Institute of Electrical and Electronics Engineers, Piscataway, USA, pp. 690-694. 5 2 Bucolo, Savatore & Matthews, Judy (2011) A conceptual model to link deep customer insights to both growth opportunities and organisational strategy in SME's as part of a design led transformation journey. In Ip, A, Cai, J, Liu, J, & Tong, G (Eds.) Design Management: Towards a New Era of Innovation: Proceedings of the 2011 Tsinghua-DMI International Design Management Symposium. Innovation and Design Management Association Ltd., Hong Kong, pp. 243-250. 2,165 Bucolo, Savatore & Matthews, Judy (2011) Design-led innovation - Exploring the synthesis of needs, technologies and business models. In Buur, J (Ed.) 2011 Participatory Innovation Conference Proceedings. University of Southern Denmark, Denmark, pp. 351-354. 1,845 Bucolo, Savatore & Matthews, Judy (2010) Using a design led disruptive innovation approach to develop new services: Practicing innovation on times of discontinuity. In Kobe, C & Goller, I (Eds.) Proceedings of the 11th International CINet Conference: Practicing Innovation in the Times of Discontinuity. CINet, Netherlands, pp. 176-187. 1,598 Bucolo, Savatore & Wrigley, Cara (2011) Design led innovation as a means to sustain social innovation enterprises. In Faust, J, Valerio, C, & Manetti, A (Eds.) Proceedings of the Design Business Conference 2011. IED Group, Spain, pp. 1-4. 274 Budiono, D., McSweeney, T, Gurung, N, & Dhanasekar, Manicka (2004) The effect of coal dust fouling on the cyclic behaviour of railway ballast. In Triantafyllidis, T (Ed.) Cyclic behaviour of soils and liquefaction phenomena : proceedings of the 2004 International Conference on Cyclic Behaviour of Soils and Liquefaction Phenomena. A A Balkema, Netherlands, pp. 627-632. Bukhari, Fakhri, Frazer, John, & Drogemuller, Robin (2010) Evolutionary algorithms for sustainable building design. In Lehmann, S, Al Waer, H, & Al-Qawasmi, J (Eds.) Proceedings of the 2nd International Conference on Sustainable Architecture and Urban Development. CSAAR Press, Jordan, pp. 363-378. 610 Bullen, Frank, Wilkinson, Sean, & Ruller, John (1997) Bicycle Crashes & Causes. In Proceedings of AIRIL'97. School of Civil Engineering, QUT, Brisbane, Queensland. Bunker, Jonathan & Ferreira, Luis (2002) Assessing Freight Corridor Modal Performance. In Nie, L, Wang, K, Xiao, G, & Yang, H (Eds.) Proceedings of the 3rd International Conference on Transportation and Traffic Studies, ICTTS 2002. American Society of Civil Engineers, Reston, USA, pp. 258-265. Bunker, Jonathan & Gray, Matthew (2005) Kelvin Grove Urban Village ; The Use of GIS in Active Transport Planning. In Proceedings of the 27th Conference of Australian Institutes of Transport Research. Queensland University of Technology / University of Queensland, Australia, Queensland, Brisbane, pp. 1-8. 1,301 Bunker, Jonathan, McKellar, Cameron, Bauer, Joshua, & Wikman, John (2005) High Occupancy Vehicle Lanes Work: An Overall Evaluation Including Brisbane Case studies (Analysis of Waterworks and Lutwyche Roads, Brisbane). In AITPM (Ed.) 2005 AITPM National Conference. AITPM, Australia, Queensland, Brisbane, pp. 229-244. 3,105 Bunker, Jonathan M. & Ferreira, Luis (2002) Assessing modal performance for freight corridors using an Australian case study. In Yang, Z., Wang, K. C. P., & Mao, B. (Eds.) Traffic and Transportation Studies. American Society of Civil Engineers. Burry, Jane, Maher, A, Burry, M, & Taylor, Mark (2003) Experiments in sublimation in design education. In Newton, C, Wollan, S, & Kaji-O'Grady, S (Eds.) Proceedings of Design + Research: The Second International Conference of the Association of Architecture Schools of Australasia. Association of Architecture Schools of Australasia, Australia, Victoria, Melbourne, -. Busch, Andrew & Boles, Wageeh (2002) Texture Classification using Wavelet Scale Relationships. In Principe, J & Bourlard, H (Eds.) Proceedings of the 2002 IEEE International Conference on Acoustics, Speech and Signal Processing. Institute of Electrical and Electronics Engineers, Piscataway, USA, pp. 3584-3587. 4 3 Busch, Andrew, Boles, Wageeh, & Sridharan, Sridha (2003) Calculating the Similarity of Textures Using Wavelet Scale Relationships. In Lovell, Brian C, Fookes, Clinton B, Maeder, Anthony J, & Campbell, Duncan A (Eds.) Proceedings of 8th Australian & New Zealand Intelligent Information Systems Conference. Queensland University of Technology, Australia, Queensland, Brisbane, pp. 507-512. Busch, Andrew, Boles, Wageeh, Sridharan, Sridha, & Chandran, Vinod (2003) Detection of Forms from Unknown Document Images. In Lovell, Brian C & Maeder, Anthony J (Eds.) Workshop Proceedings of the 2003 APRS Workshop on Digital Image Computing. University of Queensland, Australia, Queensland, Brisbane, pp. 141-144. Busch, Andrew, Boles, Wageeh, Sridharan, Sridha, & Chandran, Vinod (2001) Textual Analysis for Script Recognition. In Proceedings of Image and Vision Computing New Zealand 2001. University of Otago, Dunedin, New Zealand, pp. 289-293. Busch, Andrew, Boles, Wageeh, & Sridharan, Subramanian (2004) Combining Scale and Spatial Wavelet Features for Improved Texture Modelling. In Mohammadian, M (Ed.) Proceedings of the International Conference on Computational Intelligence for Modelling Control and Automation (CIMCA 2004). University of Canberra, CD ROM, p. 1. Busch, Andrew, Boles, Wageeh, & Sridharan, Subramanian (2004) Logarithmic Quantisation of Wavelet Coefficients for Improved Texture Classification Performance. In Deng, L & Kabal, P (Eds.) Proceedings of International Conference on Acoustics, Speech and Signal Processing (ICASSP) 2004. IEEE Signal Processing Society, CD ROM, pp. 569-572. 7 2 Busch, Andrew, Boles, Wageeh, & Sridharan, Subramanian (2002) A Multi-resolution Approach to Document Segmentation. In Chandran, V (Ed.) Proceedings of the 4th Australasian Workshop on Signal Processing and Applications 2002. Queensland University of Technology Press, Brisbane, Queensland, pp. 43-46. Buskey, Gregg, Roberts, Jonathan, Corke, Peter, Ridley, Peter, & Wyeth, Gordon (2003) Sensing and control for a small-size helicopter. In Dario, P & Siciliano, B (Eds.) Experimental Robotics VIII : proceedings of the 8th International Symposium on Experimental Robotics. Springer, Germany, Berlin, pp. 476-486. 255 10 Buskey, Gregg, Roberts, Jonathan, Corke, Peter, & Wyeth, Gordon (2003) Helicopter automation using a low-cost sensing system. In Wyeth, G & Roberts, J (Eds.) Proceedings of the 2003 Australasian Conference on Robotics and Automation. Australian Robotics and Automation Association (ARAA), Australia, pp. 1-6. 240 11 Butdee, Suthep, Suebsomran, Anan, Vignat, Frederic, & Yarlagadda, Prasad (2008) Control and path prediction of an Automate Guided Vehicle. In Gudimetla, P & Yarlagadda, P (Eds.) Proceedings of the 9th Global Congress on Manufacturing and Management (GCMM 2008). Queensland University of Technology, Australia, pp. 1-7. 6,732 Butler, Darren, Mccool, Christopher, Mckay, Matthew, Lowther, Scott, Chandran, Vinod, & Sridharan, Sridha (2003) Robust Face Localisation Using Motion, Colour & Fusion. In Sun, Changming (Ed.) 7th International Conference on Digital Image Computing: Techniques & Applications. University of Queensland, Australia, Queensland, Brisbane, pp. 899-908. Butler, Darren, Sridharan, Sridha, & Bove, V. (2003) Real-Time Adaptive Background Segmentation. In Mercer, Billene (Ed.) Proceedings of the International Conference on Acoustics, Speech and Signal Processing. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 349-352. 69 11 Butler, Darren, Sridharan, Subramanian, & Chandran, Vinod (2002) Chromatic Colour Spaces for Skin Detection using GMMS. In Principe, J & Bourlard, H (Eds.) Proceedings of the 2002 IEEE International Conference on Acoustics, Speech and Signal Processing. Institute of Electrical and Electronics Engineers, Piscataway, USA, pp. 3620-3623. 8 4 Butler, Zack, Corke, Peter, Peterson, Ronald, & Rus, Daniela (2006) Dynamic virtual fences for controlling cows. In Ang Jr, M H & Khatib, O (Eds.) Experimental Robotics IX: The 9th International Symposium on Experimental Robotics [Springer Tracts in Advanced Robotics, Volume 21]. Springer, Germany, Berlin, pp. 513-522. 1 Butler, Zack, Corke, Peter, Peterson, Ronald, & Rus, Daniela (2004) Virtual fences for controlling cows. In Valavanis, K (Ed.) Proceedings of the 2004 IEEE International Conference on Robotics and Automation, Volume 5. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 4429-4436. 614 75 46 Buttsworth, David, Jacobs, Peter, Potter, Daniel, Mudford, Neil, D'Souza, Mary, Eichmann, Troy, et al. (2011) Super-orbital re-entry in Australia - laboratory measurement, simulation and flight observation. In Kontis, K (Ed.) Proceedings of the 28th International Symposium on Shock Waves. The University of Manchester, United Kingdom, pp. 1-9. 360 Buys, Laurie, Miller, Evonne, & Robinson, Karen (2009) Australia. In Kunkel, S, Palmore, E, & Whittington, F (Eds.) The International Handbook on Aging - Current Research and Developments. Praeger, The United States of America, California, Santa Barbara, pp. 95-106. Buys, Laurie, Summerville, Jennifer, Bell, Lorraine, & Kennedy, Rosemary (2008) Exploring the social impacts of high-density living in a sub-tropical environment. In Kennedy, R (Ed.) Conference Papers: Proceedings of Subtropical Cities 2008 Conference: From fault-lines to sight-lines - subtropical urbanism in 20-20, Brisbane. Centre for Subtropical Design, Queensland University of Technology, Australia, pp. 1-8. 881 Buzer, Susan (2002) Geography, Technology and Culture. In Gerber, R & Williams, M (Eds.) Geography, Culture and Education. Kluwer Academic Publishers, Dordrecht, The Netherlands, pp. 41-50. Byers, Terry & Dawes, Leslie (2006) Out of the Square and into Reality. In Rowe, G & Reid, G (Eds.) Proceedings of the 17th Annual Conference of the Australasian Association for Engineering Education. Australasian Association for Engineering Education, CD Rom, pp. 1-9. Byrne, Edmond, Desha, Cheryl, Fitzpatrick, John, & Hargroves, Karlson (Charlie) (2010) Engineering education for sustainable development: A review of international progress. In Byrne, E (Ed.) Proceedings of the 3rd International Symposium for Engineering Education, 2010. University College Cork, Ireland, pp. 1-42. Byrne, John (1997) But Can I Trust You? Knowledge Expectations for Architects and Government. In The Knowledge Needs For Architectural Practice: Knowing How to Know. QUT, Brisbane, Queensland. Cai, Jinhai, Ee, Ming, Pham, Binh, Roe, Paul, & Zhang, Jinglan (2007) Sensor Network for the Monitoring of Ecosystem: Bird Species Recognition. In Palaniswami, M (Ed.) Proceedings of 3rd International Conference on Intelligent Sensors, Sensor Networks and Information Processing. Institute of Electrical and Electronics Engineers Inc., CD Rom, pp. 293-298. 1,638 86 53 Cai, Jinhai & Walker, Rodney (2008) Robust Motion Estimation for Camcorders Mounted in Mobile Platforms. In Robles-Kelly, A (Ed.) Proceedings - Digital Image Computing: Techniques and Applications. IEEE Conference Publishing Service, United States of America, pp. 491-497. 424 11 Cairns, Nicola, Adam, Clayton, Pearcy, Mark, & Smeathers, James (2011) Evaluation of modal analysis techniques using physical models to detect osseointegration of implants in transfemoral amputees. In Akay, M & Laine, A F (Eds.) Proceedings of the 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS. Institute of Electrical and Electronics Engineers Inc., United States, pp. 1600-1603. 358 7 4 Cairns, Nicola, Frossard, Laurent, Hagberg, Kerstin, & Branemark, Rickard (2006) Static Load Bearing During Early Rehabilitation Of Transfemoral Amputees Using Osseointegrated Fixation. In Dillon, M P (Ed.) Proceedings ofthe 30th Annual Scientific Meeting of International Society for Prosthetics and Orthotics Australia. Keynote Conferences, Australia, Western Australia, West Leederville, pp. 51-52. 255 Caldwell, Glenda (2010) Spatial stimulus - Model making in the architectural design studio. In Forsyth, G (Ed.) Proceedings of ConnectED 2010 - 2nd International Conference on Design Education. The University of New South Wales, Australia, pp. 1-5. Caldwell, Glenda & Osborne, Lindy (2011) Bouncing back : the role of design in facilitating students to understand and deal with adversity. In Hu, L, Elkadi, H, & Coulson, J (Eds.) Proceedings of the 2011 International Conference of the Association of Architecture Schools of Australasia (ASSA): Architecture @ the Edge. Deakin University, School of Architecture & Building, Australia, pp. 12-22. 145 Campbell, Brett & Brereton, Margot (2004) Designing to maintain human agency in context-aware systems. In Bond, A (Ed.) Proceedings of the Eighth Conference on Participatory Design: Artful Integration: Interweaving Media, Materials and Practices, 2004. Computer Professionals for Social Responsibility, United States of America, California, Palo Alto, pp. 97-100. Campbell, Brett & Brereton, Margot (2004) Maintaining human agency in the design on context-aware systems : Design games in a dental surgery. In Hyland, P & Vrazalic, L (Eds.) Proceedings of the 2004 Conference for the Computer-Human Interaction Special Interest Group. Computer-Human Interaction Special Interest Group (CHISIG), Australia, New South Wales, Wollongong, pp. 1-10. Campbell, Brett, Cederman-Haysom, Tim, Donovan, Jared, & Brereton, Margot (2003) Springboards into design: exploring multiple representations of interaction in a dental surgery. In Wyeth, P & Viller, S (Eds.) Proceedings of OzCHI 2003: New directions in interaction, information environments, media and technology. Computer-Human Interaction Special Interest Group (CHISIG), Australia, Queensland, Brisbane, pp. 14-23. 119 Campbell, Duncan, Beck, Hilary, Buisson, David, & Hargreaves, Doug (2009) Addressing challenges for internationalisation and mobility in engineering through CDIO standards. In Cheung, J, Kestell, C, & Grainger, S (Eds.) Proceedings of the 20th Annual Conference for the Australasian Association for Engineering Education - Engineering the Curriculum. The University of Adelaide, The School of Mechanical Engineering, Online, pp. 593-598. 619 Campbell, Duncan, Boles, Wageeh, Murray, Martin, Mahalinga-Iyer, Ramasamy-Iyer, Hargreaves, Doug, & Keir, Andrew (2007) Balancing pedagogy and student experience in first-year engineering courses. In Crawley, E (Ed.) Proceedings of Third International CDIO Conference. Massachusetts Institute of Technology, CD Rom, pp. 1-14. 558 Campbell, Duncan, Bunker, Jonathan, Hoffman, Keith, & Iyer, Mahalinga (2004) Process in distilling course capability profiles. In Snook, C & Thorpe, D (Eds.) Proceedings of the 15th Annual Australasian Association for Engineering Education Conference. Faculty of Engineering and Surveying, USQ, Australia, Queensland, Toowoomba, pp. 57-67. 1,034 Campbell, Duncan, Dawes, Les, Beck, Hilary, Wallace, Sam, Boman, Marian, & Reidsema, Carl (2009) Graduate attribute mapping with the extended CDIO framework. In Cheung, J, Kestell, C, & Grainger, S (Eds.) Proceedings of the Twentieth Annual Conference for the Australasian Association for Engineering Education: Engineering The Curriculum. The University of Adelaide, The School of Mechanical Engineering, Australia, pp. 599-604. 504 Campbell, Duncan, Dawes, Les, Beck, Hilary, Wallace, Sam, Reidsema, Carl, & Dansie, Brenton (2009) An extended CDIO syllabus framework with preparatory engineering proficiencies. In Lau, L (Ed.) Proceedings of the 5th International CDIO Conference 2009. CDIO, Singapore, pp. 1-13. 705 Campbell, Duncan, Lees, Michael, Rogers, Peter, Glastonbury, Robert, & Pecar, Michael (2002) Process Optimisation of Beer Filtration using Fuzzy Control. In Leung, H (Ed.) Proceedings of the 6th IASTED International Conference. ACTA Press, Anaheim, USA, pp. 636-640. Campoy, Pascual, Correa, Juan, Mondragon, Ivan, Martinez, Carol, Olivares, Miguel, Mejias Alvarez, Luis, et al. (2008) Computer vision onboard UAVs for civilian tasks. In Oh, P, Piegl, L, & Valavanis, K P (Eds.) Unmanned Aircraft Systems: International Symposium on Unmanned Aerial Vehicles, UAV '08. Springer, The Netherlands, pp. 105-135. 174 48 Cao, Jia-Long & O'Shea, Peter (2002) Efficient Implementation of Short Wordlength FIR Digital Filters in FPGA. In Chandran, V (Ed.) Proceedings of the 4th Australasian Workshop on Signal Processing and Applications 2002. Queensland University of Technology Press, Brisbane,Queensland, pp. 167-170. Cao, Jia-Long & O'Shea, Peter (2002) A Simplified Method for the Design of High Order 1-bit Sigma-Delta A/D converters. In Chandran, V (Ed.) Proceedings of the 4th Australasian Workshop on Signal Processing and Applications 2002. Queensland University of Technology Press, Brisbane, Australia, pp. 171-174. Cao, Zhenqei & Ledwich, Gerard (2001) Tracking Variable Periodic Signals with Fixed Sampling Rate. In Proceedings of the 40th IEEE Conference on Decision and Control: Volume 5. Institute of Electrical and Electronics Engineers, Piscataway, USA, pp. 4885-4890. 16 12 Capasso, Andrea, Waclawik, Eric, Bell, John, & Motta, Nunzio (2009) Selective growth of carbon nanotubes on bare silicon - MWNT sinthesys on patterned substrates without predeposition of metal catalyst. In Wiliem, A & Surawski, N (Eds.) Proceedings for the 3rd Smart Systems Postgraduate Conference. Queensland University of Technology, Faculty of Built Environment and Engineering, CD Rom, pp. 107-111. 36 Carey, Daniel, Roviras, Daniel, & Senadji, Bouchra (2003) Approximation of Bit-Error-Rate Distributions for Asynchronous Multicarrier CDMA and Direct-Sequence CDMA Systems. In ISSPIT 2003 Organising Committee (Ed.) 3rd International Symposium on Signal Processing and Information Technology. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 1-4. 2 2 Carey, Daniel, Roviras, Daniel, & Senadji, Bouchra (2003) Comparison of Multiple Access Interference in Asynchronous MC-CDMA and DS-CDMA. In SuviSoft (Ed.) 7th International Symposium on Signal Processing and its Applications. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 1-4. 5 3 Carey, Daniel, Senadji, Bouchra, & Roviras, Daniel (2004) Statistical Modeling of Bit-Error-Rates in Asynchronous Multicarrier CDMA and Direct-Sequence CDMA Systems. In Matz, G, Rupp, M, Wistawel, B, & Hlawatsch, F (Eds.) 12th European Signal Processing Conference (EUSIPCO 2004). Vienna University of Technology, Austria, pp. 2083-2086. 263 Carey, Daniel, Senadji, Bouchra, & Roviras, Daniel (2004) Statistical Modeling of Multiple Access Interference Power: a Nakagami-m Random Variable. In Wysocki, B & Wysocki, T (Eds.) 3rd Workshop on the Internet, Telecommunications and Signal Processing (WITSP 04). Communication Systems - CD ROM, CD ROM, pp. 219-224. 298 Carey, Nicole, Ford, Jason, & Chahl, Javaan (2004) Biologically inspired guidance for motion camouflage. In Evans, R & Mareels, I (Eds.) Proceedings of the 5th Asian Control Conference. Asian Control Conference, Hong Kong, pp. 1793-1799. 378 18 Carnie, Ryan & Walker, Rodney (2006) Image Processing Algorithms for UAV 'Sense and Avoid'. In Lee, C S G & Caplan, N (Eds.) Proceedings of ICRA 2006. Institute of Electrical and Electronics Engineering (IEEE), United States of America, pp. 2848-2853. 3,014 98 58 Carnie, Ryan, Walker, Rodney, & Corke, Peter (2005) Vision-based collision detection for UAVs. In Scott, M (Ed.) Proceedings of the 11th Australian International Aerospace Congress. International Convention Management Services, Australia, pp. 347-359. Carroll, Steven, Dawes, Leslie, Hargreaves, Megan, & Goonetilleke, Sobana (2007) Identification of Sources of Faecal Source Isolates in Ningi Creek, Australia. In Jones, M J & Patterson, R A (Eds.) Proceedings of On-site '07 Conference. Lanfax Laboratories, Australia, pp. 83-90. 205 Carroll, Steven, Goonetilleke, Ashantha, & Hargreaves, Megan (2004) Assessment of Environmental and Public Health Risk of On-site Wastewater Treatment Systems. In Mankin, K & Converse, J (Eds.) Proceedings of the Tenth Natinal Symposium on Individual and Small Community Sewage Systems. American Society of Agricultural Engineers, Michigan, USA, pp. 368-376. 1,549 5 Carroll, Steven, Goonetilleke, Ashantha, & Hargreaves, Megan (2005) Sourcing Faecal Contamination Through Antibiotic Resistance Pattern Classification. In Jones, M J & Patterson, R A (Eds.) Performance Assessment for On-site Systems: Regulation, Operation and Monitoring. Proceedings of On-site '05 Conference. Lanfax Laboratories, Australia, pp. 115-122. 657 Carroll, Steven, Goonetilleke, Ashantha, & Thomas, Evan (2003) Risk-Based Approach to On-Site Wastewater Treatment. In Jones, Malcolm J & Patterson, Robert A (Eds.) Proceedings of On-site '03 Conference - Future Directions for On-site Systems: Best Management Practice. Lanfax Laboratories, Australia, New South Wales, pp. 93-100. 622 Carroll, Steven, Thomas, Evan, Fiedling, Lloyd, Dowding, Charlie, Dawes, Les, & Goonetilleke, Ashantha (2007) Translating a risk-based land-use planning issue to a decision making tool using simple GIS approaches. In 11th Individual and Small Community Sewage Systems Conference Proceedings. American Society of Agricultural and Biological Engineers. Castillo, Martin, Usuba, Shu, Kim, D., Kakudate, Yozo, Mamiya, Mikito, & Nagai, Hideaki (2007) Effects of gravity on the ignition of hydrogen and air premixed gases via hot surface. In Hibiya, T & Beysens, D (Eds.) Proceedings of the 3rd International Symposium on Physical Sciences in Space 2007. Japan Society of Microgravity Application / Japan Aerospace Exploration Agency, Japan, pp. 353-354. Ceccato, C, Fischer, Thomas, Li, C, & Frazer, John (2002) A Large-Scale Computing Infrastructure for Design Education. In Wrona, S & Koszewski, K (Eds.) Proceedings of the 20th Conference on Education in Computer Aided Architectural Design in Europe: "Design e-ducation, Connecting the Real and the Virtual". pp. 282-289. Cederman-Haysom, Tim & Brereton, Margot (2004) Bridging technical and HCI research : creating usable ubiquitous computing. In Hyland, P & Vrazalic, L (Eds.) Proceedings of the 2004 Conference for the Computer-Human Interaction Special Interest Group. Computer-Human Interaction Special Interest Group (CHISIG), Australia, New South Wales, Wollongong, pp. 1-11. Cederman-Haysom, Tim & Brereton, Margot (2004) Designing usable ubiquitous computing. In Bond, A (Ed.) Proceedings of the 8th biennial Participatory Design Conference : Artful integration : Interweaving media, materials and practices. Computer Professionals for Social Responsibility, United States of America, California, Palo Alto, pp. 101-104. Cederman-Haysom, Tim & Brereton, Margot (2006) A participatory design agenda for ubiquitous computing and multimodal interaction: a case study of dental practice. In Jacucci, G & Kensing, F (Eds.) Proceedings of the 9th Conference on Participatory design: Expanding boundaries in design, Volume 1. Association for Computing Machinery (ACM), United States of America, pp. 11-20. 221 7 Chakrabarti, Saikat, Eliades, Demetrios, Kyriakides, Elias, & Albu, Mihaela (2007) Measurement uncertainty considerations in optimal sensor deployment for state estimation. In Proceedings of the 2007 IEEE International Symposium on Intelligent Signal Processing. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 1-6. 26 Chakrabarti, Saikat & Jeyasurya, B. (2006) Sensitivity-based generation rescheduling for multicontingency voltage stability enhancement. In Proceedings of the 2006 IEEE Power Engineering Society General Meeting. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 1-6. 3 Chakrabarti, Saikat & Jeyasurya, Benjamin (2004) Effect of load modeling on the performance of power system voltage stability indices. In Gill, E (Ed.) Proceedings of the 14th Annual Newfoundland Electrical and Computer Engineering Conference. IEEE Newfoundland and Labrador Section, Canada, pp. 1-5. Chakrabarti, Saikat & Jeyasurya, Benjamin (2005) Multicontingency voltage stability monitoring of power systems using radial basis function network. In Lee, K Y, Momoh, J A, & Niebur, D (Eds.) Proceedings of the 13th International Conference on Intelligent Systems Application to Power Systems. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 314-319. 3 Chakrabarti, Saikat & Jeyasurya, Benjamin (2004) On-line voltage stability monitoring using artificial neural network. In El-Hawary, F (Ed.) Proceedings of the 7th Large Engineering Systems Conference on Power Engineering. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 71-75. 21 Chakrabarti, Saikat & Jeyasurya, Benjamin (2005) Sensitivity-based generation rescheduling for voltage stability enhancement. In Proceedings of the 2005 Power Engineering Society General Meeting. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 339-343. 1 Chakrabarti, Saikat & Kyriakides, Elias (2007) Grid-connected hybrid energy system for a typical home in Cyprus. In Proceedings of the 1st International Renewable Energy Sources and Energy Efficiency Conference, 2007. p. 1. Chakrabarti, Saikat & Kyriakides, Elias (2007) Optimal placement of phasor measurement units for state estimation. In Milanovic, J (Ed.) Proceedings of the 7th IASTED International Conference on Power and Energy Systems. ACTA Press, Canada, pp. 1-5. 10 Chakrabarti, Saikat, Kyriakides, Elias, Ledwich, Gerard, & Ghosh, Arindam (2010) A comparative study of the methods of inclusion of PMU current phasor measurements in a hybrid state estimator. In Traynor, P (Ed.) Proceedings of the 2010 IEEE Power and Energy Society General Meeting. Institute of Electrical and Electronics Engineers Inc., United States, pp. 1-7. 1,096 24 4 Chakrabarti, Saikat, Ledwich, Gerard, & Ghosh, Arindam (2009) Reliability driven reconfiguration of rural power distribution systems. In Sinha, A (Ed.) E-Proceedings from the Third International Conference on Power Systems. Institute of Electrical and Electronics Engineers Inc., India, pp. 1-6. 597 8 Chakrabarti, Saikat, Venayagamoorthy, Ganesh, & Kyriakides, Elias (2009) PMU placement for power system observability using binary particle swarm optimization. In Phung, T (Ed.) Proceedings of the 2008 Australasian Universities Power Engineering Conference. Institute of Electrical and Electronics Engineers Inc., United States of America, pp. 1-5. 862 49 Chakravarthi, Raman, Brown, Robert, Kelly, Charles, & Hargreaves, Douglas (2004) Effect on Water Quality by Emissions from 2-Stroke Outboard Engines When Using Both Mineral Lubricant and Environmentally Adaptive Lubricant (EAL). In Lim, S C (Ed.) Ist International Conference on Advanced Tribology 2004 (iCAT 2004). Recent Progress and New Directions. iCAT Singapore, Singapore, pp. 1-2. Chakravarthi, Raman Swaroop (Roop Swaroop) & Brown, Richard (2005) Two-and Four-Stroke Outboard Engine Emissions to Water: Effect on Water Quality. In Gamble, D (Ed.) Creating Sustainable Engineering Solutions 2005 Environmental Engineering Society National Conference. ICE, CD Rom, pp. 1-7. Challa, Subhash & Faruqi, Farhan (1997) A New Approach to Optimal Non-linear Filtering. In Proceedings of ICASSP'97 (Vol 3 of 5). IEEE Computer Society Press, Los Alamitos, USA. Chamorro Koc, Marianella, Popovic, Vesna, & Emmison, Michael (2005) Context of use and user's experience : An Exploratory Study in the Product Design Domain. In Redmond, J, Durling, D, & de Bono, A (Eds.) Futureground: Volume 2: Proceedings. Monash University, Australia, pp. 1-14. 335 Chamorro Koc, Marianella, Popovic, Vesna, & Emmison, Michael (2005) Visual Representation of Concepts: Exploring Users' and Designers' Concepts of Everyday Products. In Ming-Chyuan, H (Ed.) New Design Paradigms: Proceedings of International Design Congress 2005. Organizing Committee of 2005 International Design Congress, Taiwan, pp. 1-10. 2,919 Chamorro-Koc, Marianella, Davis, Rebekah, & Popovic, Vesna (2009) Designers' experience and collaborative design: Two case studies. In Schadewitz, N (Ed.) IASDR2009 Proceedings. Korean Society of Design Science, CD Rom, pp. 1-13. 254 Chamorro-Koc, Marianella & Popovic, Vesna (2008) Context-of-use and the design of user-product interactions: exploring casual relationships. In Rust, C, Lever, J, Christer, K, & Turnbull, J (Eds.) Proceedings of the 2008 Design Research Society Conference. Sheffield Hallam University, United Kingdom, pp. 1-13. Chamorro-Koc, Marianella & Popovic, Vesna (2009) Experiential knowledge representation and the design of product usability. In Smith, C, Reilly, L, Niedderer, K, & Roworth-Stokes, S (Eds.) Proceedings of the International Conference 2009 of the DRS Special Interest Group on Experiential Knowledge. London Metropolitan University, United Kingdom, pp. 1-15. 222 Chamorro-Koc, Marianella, Popovic, Vesna, Blackler, Alethea, & Kraal, Ben (2011) Using visuals to explore the contextual aspects of user-product interactions. In Chen, L L, Stappers, P J, & Roozenburg, N F M (Eds.) Diversity and unity: Proceedings of IASDR2011, the 4th World Conference on Design Research. Delft University of Technology, Netherlands, pp. 1-12. 132 Chamorro-Koc, Marianella, Popovic, Vesna, & Emmison, Michael (2007) Experience, Context of Use and the User-Product Interaction Design. In Poggenpohl, S (Ed.) IASDR07 Proceedings: Emerging Trends in Design Research. Hong Kong Polytechnic University, CD Rom, pp. 1-18. 235 Chan, Albert, Chan, D.W.M., Fan, L.C.N., Lam, P.T.I., & Yeung, J.F.Y. (2005) Project Partnering in Hong Kong - A Case Study of a Prestigious Office Development Project. In Sidwell, A (Ed.) Conference Proceedings of QUT Research Week 2005. Queensland University of Technology, CD-Rom, pp. 1-13. 1 Chan, Albert, Lam, Patrick, Chan, Daniel, Cheung, Esther, Sidwell, Anthony, & Kajewski, Stephen (2007) A Research Framework for Investigating Public Private Partnerships (PPP) in Hong Kong. In Ahmed, S, Azhar, S, & Mohamed, S (Eds.) Proceedings of the 4th International Conference on Construction in the 21st Century. Florida International University & Griffith University, CD Rom, pp. 334-341. 307 Chan, Albert, Sidwell, Anthony, Chan, D, Lam, P.T.I., Fan, L.C.N., & Yeung, J.F.Y. (2007) Comparing Partnering Practices and Performance Between Australia and Hong Kong - A Case Study Approach. In Kenley, R (Ed.) Proceedings 2007 Conference of the Australasian Universities Building Education Association. Australasian Universities Building Education Association, Australia, pp. 1-10. 1,028 Chan, Clifford, Yu, K.M., & Yung, K.L. (2011) Selection of solar energy for green building using superiority and inferiority multi-criteria ranking (SIR) method. In Ni, F D, Liu, S Z, Shen, A W, & Javed, A A (Eds.) Proceedings from the 3rd International Postgraduate Conference on Infrastructure and Environment. Faculty of Construction and Land Use, The Hong Kong Polytechnic University, Hong Kong, pp. 45-52. 393 3 Chan, Derek, Gallage, Chaminda, Gould, Scott, Kodikara, Jayantha, Bouazza, Abdelmalek, & Cull, Jim (2009) Field instrumentation of water reticulation pipe buried in reactive soil. In Gale, A (Ed.) OzWater' 09 Conference Proceedings. Australian Water Association, CD Rom, pp. 1-8. 263 Chan, Derek, Rajeev, Pathmanathyna, Gallage, Chaminda, & Kodikara, Jayantha (2010) Regional field measurement of soil moisture content with neutron probe. In Li, J & Lin, M (Eds.) Proceedings Volume 1 of The Seventeenth Southeast Asian Geotechnical Conference. Taiwan Geotechnical Society/Southeast Asian Geotechnical Society, Taiwan, pp. 92-95. 435 Chan, Kwai, Frazer, John, & Tang, Ming (2002) An Evolutionary Framework for Enhancing Design. In Gero, J S (Ed.) Artificial Intelligence in Design '02. Kluwer Academic Publishers, Netherlands, Dordrecht, pp. 383-403. Chan, Kwai, Frazer, John, & Tang, Ming (2002) An evolutionary framework for enhancing design. In Gero, J S (Ed.) Artificial Intelligence in Design '02. Kluwer Academic Publishers, The Netherlands, Dordrecht, pp. 383-403. Chan, Melissa, Coffey, Vaughan, & Trigunarsyah, Bambang (2011) Relational contracting and its efficacy of project outcomes in the Australian construction industry. In Singh, A, Cheung, S, Yazdani, S, & Ghafoori, N (Eds.) Modern Methods and Advances in Structural Engineering and Construction - Proceedings of the Sixth International Structural Engineering and Construction Conference (ISEC-6). Research Publishing Services, Singapore, pp. 53-58. Chan, Melissa, Coffey, Vaughan, & Trigunarsyah, Bambang (2010) Steering towards pinnacle of success: the NEC tenents in Australian construction contracting. In Haigh, R, Barrett, P, Pathirage, C, Amaratunga, D, & Keraminiyage, K (Eds.) Proceeding of CIB 2010 World Congress Building a Better World. CIB, United Kingdom, pp. 402-415. 883 Chan, Melissa, Trigunarsyah, Bambang, & Coffey, Vaughan (2011) Towards a relational contracting framework in the Australian construction industry: an initial framework. In Han, S, Kim, J, Wang, X, Davis, S, & Carmichael, D (Eds.) Proceedings of the 4th International Conference on Construction Engineering and Project Management: ICCEPM-2011. ICCEPM-2011, Australia, pp. 1-7. Chan, Teckwai & Ledwich, Gerard (2001) Multi-Mode Damping Using Single HVDC Link. In Proceedings of the 2001 Australasian Universities Power Engineering Conference. Curtin University of Technology, Perth, Western Australia, pp. 483-488. Chan, Teckwai, Ledwich, Gerard, & Palmer, Edward (2002) Is Velocity Feedback Always Best for Machine Stability Control? In Zahedi, A (Ed.) Proceedings of Australasian Universities Power Engineering Conference 2002. Australasian Committee for Power Engineering, Melbourne, Australia, pp. 1-6. 4 Chan, Tommy (2007) Industry-based Projects and Supervision of Students Work by Industry Professionals. In Leung, T P & Taplin, M (Eds.) Innovations in Professional Education: Practices and Reflections. Pearson, Australia, pp. 259-271. Chan, Tommy (2007) Recent Advances in Moving Force Identification. In Yau, J D & Yang, Y B (Eds.) Proceeding of the 3rd International Symopsium on Environmental Vibrations: Prediction, Monitoring, Mitigation and Evaluation. Department of Civil Engineering, National Taiwan University, Taiwan, pp. 609-616. Chan, Tommy, Ko, Jan Ming, & Li, ZX (2003) Studies of Overload Effect on Fatigue Damage of Steel Bridges. In Proceedings of International Conference on Health Monitoring of Structure, Material and Environment. Swets and Zietlinger, pp. 815-822. 1 Chan, Tommy, Li, Xiao, & Guo, L (2002) Fatigue stress analysis of suspension bridges using FEM. In Chan, S L, Teng, J G, & Chung, K F (Eds.) Proceedings of the Third International Conference on Advances in Steel Structures. Elsevier, United States of America, pp. 799-806. Chan, Tommy, Li, ZX, Thambiratnam, David, & Tan, Chit (Andy) (2007) Fatigue Damage Assessment of Steel Bridges using Strain Measurement. In Sihotang, F, Adventus, M, Dewobroto, W, Hardjasaputra, J, & Widjajakusuma, J (Eds.) Proceedings of The Future Development in Structural and Civil Engineering based on Research and Practical Experience. unsure, unsure, pp. 300-307. Chan, Tommy & Miao, T.J. (2011) Statistical analyses of Weigh-In-Motion data for bridge live load development. In Faber, M H, Koehler, J, & Nishijima, K (Eds.) Applications of Statistics and Probability in Civil Engineering - ICASP 2011: Proceedings of the 11th International Conference on Applications of Statistics and Probability in Civil Engineering. CRC Press / Taylor and Francis Group, LLC, Netherlands, pp. 355-362. 302 1 Chan, Tommy & Miao, TJ (2002) A Study on the Multiple Presence of Vehicles on Bridges. In Brett, P H, Banthia, N, & Buckland, P G (Eds.) Proceedings of Developments in Short and Medium Span Bridge Engineering 2002. Canadian Society for Civil Engineering, Montreal, Canada, pp. 707-722. Chan, Tommy, Shih, Wai, & Thambiratnam, David (2009) Case studies on vibration based damage identification: multi-criteria approach. In Zuo, M, Kang, R, Miao, Q, & Huang, H Z (Eds.) The Proceedings of 2009 8th International Conference on Reliability, Maintainability and Safety - ICRMS'2009. Institute of Electrical and Electronics Engineers/UESTC Publishing House, China, pp. 1242-1247. 261 Chan, Tommy, Wong, K, Li, Zhaoxia, & Ni, Y.Q. (2011) Structural health monitoring for long span bridges: Hong Kong experience and continuing onto Australia. In Chan, T & Thambiratnam, D (Eds.) Structural Health Monitoring in Australia. Nova Science Publishers, New York, pp. 1-32. 11 Chan, Tommy, Yu, Y, Wong, K, & Guo, L (2007) A Multi-Scale Finite Element Model of Tsing Ma Bridge for Hot Spot Stress Areas. In Li, A, Li, Z, Sih, G, & Nied, H (Eds.) Proceedings of International Conference on Health Monitoring of Structure, Material and Environment. Southeast University Press, China, pp. 130-140. Chan, Tommy, Yu, Y, Wong, K, & Li, Zhaoxia (2009) Condition-assessment-based finite element modelling of long-span bridge by mixed dimensional coupling method. In Ni, J, Ma, L, Lee, J, Jinji, G, & Mathew, J (Eds.) Proceedings of the 3rd World Congress on Engineering Asset Management and Intelligent Maintenance Systems Conference. Springer-Verlag London Ltd, CD Rom, pp. 1-11. 1,268 Chan, Tommy H.T., Li, Z.X., & Ko, Jan Ming (2000) Fatigue analysis for steel bridge deck sections under blocked cycles of traffic loading. In Proceedings SPIE 3995: Nondestructive Evaluation of Highways, Utilities, and Pipelines IV. SPIE, pp. 358-369. Chan, Tommy H.T. & Thambiratnam, David P. (2011) Preface. In Chan, T. & Thambiratnam, D.P. (Eds.) Structural Health Monitoring in Australia. Nova Science Publishers, Hauppauge, N.Y, ix-xii. Chan, Ying, Bunker, Jonathan, & Kumar, Arun (2006) Overloading truck traffic study and strategy to minimise it. In Shih Hoi, W & Sirikijpanichkul, A (Eds.) Proceedings of the Faculty of Built Environment and Engineering Infrastructure Theme Conference 2006. Queensland University of Technology, Faculty of Built Environment and Engineering, Australia, pp. 21-30. Chandran, Vinod & Chen, Brenden (2006) Simultaneous Biometric Verification and Random Number Generation. In Wysocki, B J & Wysocki, T A (Eds.) 5th Workshop on Internet, Telecommunications and Signal Processing. DSP for Communication Systems, CD Rom, pp. 1-6. 236 Chandran, Vinod, Nguyen, Anthony, Prandolini, Robert, & Sridharan, Sridha (2001) Importance Assignment to Regions in Surveillance Imagery to Aid Visual Examination and Interpretation of Compressed Images. In Proceedings of the 2001 International Symposium on Intelligent Multimedia, Video and Speech Processing. The Hong Kong Polytechnic University, Hong Kong, China, pp. 385-388. 5 3 Chandran, Vinod, Ning, Daryl, & Sridharan, Subramanian (2004) Speaker Identification Using Higher Order Spectral Phase Features and Their Effectiveness vis-a-vis Mel-Cepstral Features. In Jain, A & Zhang, D (Eds.) Biometric Authentication First International Conference (ICBA 2004) Proceedings. Springer, Heidelberg, Germany, pp. 614-622. 7 5 Chandran, Vinod & Ong, Chien (2002) Identification and Classification of Viruses in Electron Microscope Images using Higher Order Spectral Features. In Chandran, V (Ed.) Proceedings of the 4th Australasian Workshop on Signal Processing and Applications 2002. Queensland University of Technology, Brisbane, Queensland, pp. 55-58. Chang, Kevin, Huang, Brian, & Senadji, Bouchra (2010) Analysis of primary user duty cycle impact on spectrum sensing performance. In Chao, C & Kohno, R (Eds.) Proceedings of 2010 International Symposium on Information Theory and its Applications. Institute of Electrical and Electronics Engineers Inc., United States, pp. 940-945. 610 10 Chang, Kevin, Senadji, Bouchra, & Chandran, Vinod (2011) Analysis of detection performance in spectrum sensing optimisation for long sensing periods. In Djukic, P (Ed.) Proceedings of the 22nd IEEE Personal, Indoor, Mobile and Radio Communications. Institute of Electrical and Electronics Engineers Inc., United States, pp. 457-461. 236 3 3 Chang, Mark & Wyeth, Gordon (2004) Probabilistic world modeling for distributed team planning. In Harashima, F (Ed.) Proceedings of the 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems. Institute of Electrical and Electronics Engineers Inc., The United States of America, pp. 1426-1431. 1 Chanson, Hubert, Brown, Richard, & Ferris, John (2004) Hydrodynamic and Ecological Study of a Sub-Tropical Estuary in Queensland. In Mossa, M, Yasuda, Y, & Chanson, H (Eds.) Fluvial, Environmental & Costal Developments in Hydraulic Engineering. A.A Balkema Publishers (Taylor and Francis Group), London, United Kingdom, pp. 133-150. Chanson, Hubert, Brown, Richard, & Ferris, John (2004) Simultaneous Field Measurement of Turbulence of Water Quality in a Sub-Tropical Estuary in Australia. In Lin, W, Behnia, M, & McBain, G (Eds.) Proceedings of the 15th Australasian Fluid Mechanics Conference. University of Sydney, Sydney, NSW, pp. 1-4. Chao, Chris, Iskander, Robert, Collins, Michael, Davis, Brett, & Bennamoun, Mohammed (1999) Dynamic Retinal Image Reconstruction of the Human Eye. In Proceeding of the 5th International Symposium on Signal Processing and its Applications. Queensland University of Technology, Brisbane, Queensland, pp. 919-922. 376 4 Charity, John, Ling, S.M, & Whitehouse, Sarah (2010) Clinical results in primary THR. In Ling, R S M, Lee, A J C, Gie, G A, Hubble, M J W, Howell, J R, Timperley, A J, et al. (Eds.) The Exeter Hip: 40 years of innovation in total hip arthroplasty. Exeter Hip Publishing, The United Kingdom, pp. 207-229. Charleson, Andrew & Taylor, Mark (2004) Earthquake architecture explorations. In Proceedings of the 13th World Conference on Earthquake Engineering. The Canadian Association for Earthquake Engineering, CD ROM, pp. 596-599. 1,344 Chatterjee, Dheeman, Ghosh, Arindam, & Pai, M (2006) Trajectory sensitivity analysis in distributed generation systems. In Rajagopal, K R (Ed.) Proceedings of the International Conference on Power Electronics, Drives And Energy Systems 2006. IEEE explore, http://ieeexplore.ieee.org/xpl/mostRecentIssue.jsp?punumber=4147829, pp. 1-6. 9 Chattopadhyay, Gopi (2002) Action Research used in Designing Assessment Scheme for Teaching and Learning Project Management. In Yarlagadda, P & Mahalinga Iyer, R (Eds.) Proceedings of the 9th Asia-Pacific Conference of Engineering Management Educators. Queensland University of Technology, Brisbane, Queensland, pp. 149-153. Chattopadhyay, Gopi (2002) Analysis of Warranty Claims Data for Estimation of Parameter for Warranty Cost Models. In Mathew, J (Ed.) Proceedings of the 3rd Asia-Pacific Conference on Systems Integrity and Maintenance. Queensland University of Technology, Brisbane, Queensland, pp. 72-76. Chattopadhyay, Gopi (2004) Comparative Evaluation of Costs for Buy Back and Free Replacement Warranty Policies for Optimal Decision on Warranty Terms. In Rao, Raj B K N, Jones, Barry E, & Grosvenor, Roger I (Eds.) Profit Through Innovation & Proactive Management, COMDADEM 2004. COMADEM International, Birmingham, United Kingdom, pp. 298-304. Chattopadhyay, Gopi (2004) Development of a Learning Package for Interactive Learning in Enterprise Resource Planning. In Xie, M, Tang, H K, & Durrani, T S (Eds.) 2004 IEEE International Engineering Management Conference. Stallion Press, Pistcataway, United States, pp. 848-850. 1 Chattopadhyay, Gopi (2004) Learning Package for Mass Education in Developing Countries. In Roy, K C (Ed.) Twentieth Century Development - Some Relevant Issues. Nova Science Publishers, Hauppauge, New York, United States, pp. 89-100. Chattopadhyay, Gopi, Kumar, Saurabh, Larsson-Kraik, Per-Olaf, & Kumar, Uday (2006) Estimation of Parameter for Rail Degradation. In Rao, R B K N, Kumar, U, & Parida, A (Eds.) Condition Monitoring and Diagnostic Engineering Management: Proceedings of the 19th International Congress. Lulea University Press, Sweden, Lulea, pp. 605-612. Chattopadhyay, Gopi, Larsson-Kraik, Per, Kumar, Uday, & Holmgren, M (2005) Evaluation of Rail Inspection and Maintenance Strategies. In Mba, D U & Rao, R B (Eds.) Condition Monitoring and Diagnostic Engineering Management (COMADEM 2005): Proceedings of the 18th International Congress. Cranfield University Press, United Kingdom, Bedfordshire, Cranfield, pp. 621-628. Chattopadhyay, Gopi, Ma, Lin, Mathew, Joseph, & Ternel, Iola (2002) Engineering Management - Preparing a New Generation of Managers. In Iyer, R & Yarlagadda, P (Eds.) Proceedings of the 9th Asia-Pacific Conference of Engineering Management Educators. Queensland University of Technology, Brisbane, Queensland, pp. 126-128. Chattopadhyay, Gopi & Rahman, Anisur (2006) Analysis of Rail Failure Data for Developing Predictive Models and Estimation of Model Parameters. In Ma, L, Tan, A, Mathew, J, Kennedy, J, & Anderson, D (Eds.) Engineering Asset Management : Proceedings of the 1st World Congress on Engineering Asset Management (WCEAM). Springer-Verlag London Ltd, CD ROM, pp. 1-8. Chattopadhyay, Gopi & Rahman, Anisur (2004) Modelling Cost for Lifetime Warranty Policies. In Rao, Raj B K N, Jones, Barry E, & Grosvenor, Roger I (Eds.) Profit Through Innovation & Proactive Management, Proceedings of the 17th International Congress on Condition Monitoring and Diagnostic Engineering Management COMADEM2004. COMADEM International, Birmingham, UK, pp. 289-297. Chattopadhyay, Gopi & Rahman, Anisur (2005) Modelling Costs and Risks to Manufacturers and Buyers for Lifetime Warranty Policies. In Mba, D & Rao, R (Eds.) Conditional Monitoring and Diagnostic Engineering Management (COMADEM 2005): Proceedings of the 18th International Congress. Cranfield University Press, United Kingdom, pp. 73-82. Chattopadhyay, Gopi, Rahman, Anisur, Iyer, Mythiley, Ho, David, & Gurung, Netra (2002) Modelling Environmental and Human Factors in Maintenance of High Volume Infrastructure Components. In Mathew, J (Ed.) Proceedings of the 3rd Asia-Pacific Conference on Systems Integrity and Maintenance. Queensland University of Technology Press, Brisbane, Australia, pp. 66-71. Chattopadhyay, Gopi, Reddy, Venkatarami, & Hargreaves, Douglas (2006) Development of Framework for Benchmarking Rail-Wheel Lubrication. In Hargreaves, D (Ed.) Proceedings of the 7th International Tribology Conference: AUSTRIB 2006: Putting Tribology to Work. AUSTRIB, CD Rom, pp. 1-13. Chattopadhyay, Gopi, Reddy, Venkatarami, Hargreaves, Douglas, & Larsson-Kraik, Per (2004) Assessment of risks and cost-benfit analysis of various lubrication strategies for rail tracks under different operating conditions. In Tonder, K (Ed.) Proceedings for the 11th Nordic Symposium on Tribology 2004. Tromso, Hastad, Norway, pp. 289-296. Chattopadhyay, Gopi, Reddy, Venkatarami, Hargreaves, Douglas, & Larsson-Kraik, Per (2004) Integrated Rail and Wheel Maintenance Model for Cost Sharing by Rail Players. In Ma, L, Rao, J S, Vyas, N S, Mathew, J, & Raghuram, V (Eds.) A Fusion of Harmonics - VETOMAC-3 and ACSIM-2004. Allied Publishers Pvt Ltd, New Delhi, India, pp. 170-177. Chattopadhyay, Gopi, Reddy, Venkatarami, Kumar, Dinesh, & Pannu, H (2005) Modelling and Analysis of Wear Limit for Economic Rail Replacements. In Chandru, V & Balasubramanian, P (Eds.) International Conference on Operations Research Applications in Infrastructure Development in Conjuction with the 2005 Annual Convention of Operational Research Society of India (ICORAID-2005-ORSI). Operational Research Society of India, India, Bangalore, 209.01-209.10. Chattopadhyay, Gopi, Reddy, Venkatarami, Larsson-Kraik, Per, & Hargreaves, Douglas (2004) Comparative Evaluation of Various Rail-wheel Lubrication Strategies. In Rao, Raj B K N, Jones, Barry E, & Grosvenor, Roger I (Eds.) Profit Through Innovation & Proactive Management, COMADEM2004. COMADEM International, Birmingham, United Kingdom, pp. 52-57. Chattopadhyay, Gopi, Reddy, Venkatarami, Larsson-Kraik, Per-Olaf, & Hargreaves, Douglas (2006) Rail-Wheel Lubrication Practice: Framework for Lubrication Effectiveness. In Rao, R B K N, Kumar, U, & Parida, A (Eds.) Condition Monitoring and Diagnostic Engineering Management: Proceedings of the 19th International Congress. Lulea University Press, Sweden, pp. 595-604. Chattopadhyay, Gopi, Reddy, Venkatarami, Ong, P, & Hayne, Mark (2004) Development of Integrated Data Acquisition System for Condition Monitoring of Rail Track. In Rao, Raj B K N, Jones, Barry E, & Grosvenor, Roger I (Eds.) Profit Through Innovation & Proactive Management, COMADEM2004. COMADEM International, Birmingham, United Kingdom, pp. 62-69. Chattopadhyay, Gopinath (2003) Learning packages for Mass Education in Developing Countries. In Roy, K C (Ed.) Twentieth Century Development : Some Relevant Issues. Nova Science Publishers, United States of America, pp. 51-60. Chattopadhyay, Gopinath, Reddy, Venkatarami, Larsson, P., & Hargr